Dr StandBy
Большой дядька moderator | Редактировать | Профиль | Сообщение | ICQ | Цитировать | Сообщить модератору
| Motherboard | BIOS ver. | Descriptions | | IC7/IC7-G rev 1.0/v1.1 | 1.7 | Added hot key wording to enter BIOS setup when full screen logo enabled. Changed the option wording from "OnChip SATA" to "OnChip SATA RAID" for "Bootable Add-in Device". Changed the default setting of "OnBoard IR Port" to "Disabled". Fixed the booting failure problem of Maxtor SATA HDD (Model name: 6Y120M0) in ICH5R RAID 0 status. Changed the option wordings of "Boot Device" from "ZIP100" to "ZIP100/250" and from "USB-ZIP" to "USB-ZIP/LS120". Enhanced the system stability when over clocks the CPU FSB over 255 MHz with CPU:DRAM = 1:1 setting. Revised the wording of memory status from "DDR at Bank" to "DDR at DIMM" in system configuration table. Included new Intel CSA LAN boot agent v1.21.07 for 82547EI chip (for IC7-G only). Displayed correct specification of DDR200 memory module during POST. Fixed the problem that specific CD-ROM device could not be correctly detected when there is specific HDD connected onto the same IDE cable. Updated CPU micro code (0F24H/1EH, 0F25H/15H, 0F27H/37H, 0F29H/17H). Revised display wording of "Time Alarm" menu box in BIOS setup. | | IC7-MAX3 rev1.0 | 1.2 | Displayed correct FSB frequency for PSB400 CPU after CMOS data discharged. Fixed the booting failure problem of Maxtor SATA HDD (Model name: 6Y120M0) in ICH5R RAID 0 status. Changed the option wordings of "Boot Device" from "ZIP100" to "ZIP100/250" and from "USB-ZIP" to "USB-ZIP/LS120". Enhanced the system stability when over clocks the CPU FSB over 255 MHz with CPU:DRAM = 1:1 setting. Revised the wording of memory status from "DDR at Bank" to "DDR at DIMM" in system configuration table. Removed the status report of Serial/Parallel port in system configurations table. Included new Intel CSA LAN boot agent. Displayed correct specification of DDR200 memory module during POST. Fixed the problem that specific CD-ROM device could not be correctly detected when there is specific HDD connected onto the same IDE cable. Updated CPU micro code (0F24H/1EH, 0F25H/15H, 0F27H/37H, 0F29H/17H). Revised display wording of "Time Alarm" menu box in BIOS setup. | | IS7 / IS7-G / IS7-E | 1.6 | Updated CPU micro code (0F29H/14H). Added hot key wording to enter BIOS setup when full screen logo enabled. Changed the option wording from "OnChip SATA" to "OnChip SATA RAID" for "Bootable Add-in Device". Changed the default setting of "OnBoard IR Port" to "Disabled". Fixed the booting failure problem of Maxtor SATA HDD (Model name: 6Y120M0) in ICH5R RAID 0 status. (for IS7-G and IS7 only) Changed the option wordings of "Boot Device" from "ZIP100" to "ZIP100/250" and from "USB-ZIP" to "USB-ZIP/LS120". Enhanced the system stability when over clocks the CPU FSB over 255 MHz with CPU:DRAM = 1:1 setting. (Over clocking is out of warranty) Revised the wording of memory status from "DDR at Bank" to "DDR at DIMM" in system configuration table. Fixed the problem that specific CD-ROM device could not be correctly detected when there is specific HDD connected onto the same IDE cable. |
----------
Не думай. Если думаешь - не говори
Если думаешь и говоришь - не пиши. Если думаешь, говоришь, пишешь - не подписывай. Если думаешь, говоришь, пишешь и подписываешь - не удивляйся (Ф.Э.Д.) |
|
