neva102502
Advanced Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
SolidWorks 2004 SP 3.0
The following problems/enhancements have been addressed in SolidWorks
2004 SP 3.0:
SPR # Description
159826 Can no longer create drawings with different paper size and sheet
format size.
184229 Rotated break view will delete ordinate dimensions that are
outside of the break lines when view is broken
185482 Physical property units of Material should match units of part
(NOTE: Fix applies to pressure units).
187416 Unable to create a 'Parallel Plane at Point' using a Reference
Point
189426 File investigations
190102 To apply materials to part configurations requires that the user
selects and opens the material folder in the PhotoWork manager. NOTE
FIX: if "configuration" is the current selection, then treat it as whole
part is selected.
190538 Mass properties returns incorrect results for volume
190845 Custom property value is missing after check in using property
mappings.
192404 Error: Cut-Extrude13: Operation failed due to geometric
condition..
192533 Visibility setting for Shaded Cosmetic Threads is not written out
to document template or document itself
194246 Using the explode feature of a drawing block shows hidden layers
194359 Custom Property Mappings deletes default properties in SolidWorks
file after checking in and opening from vault
194674 Procedural material is showing lines as if it is a tiled image.
194870 Part has problem of becoming a bad body each time the file is
opened and certain steps are followed.
195041 This fillet created an invalid face is
195147 Instability when applying a relation while a flyout toolbar is
visible from the command manager.
196537 Model opens with 2 bodies; saved with 1. For FIX to take effect,
after opening the file, Force Regen, Ctrl+Q the model
196539 PhotoWorks custom colors are reset for every session of
SolidWorks.
196893 SolidWorks Help file still lists Excel 97 as being needed for
design table and BOM creation
196938 Visible edges in this drawing are dashed and not solid.
197021 Unreported bad geometry in this part
197093 Instability when trying to open this assembly
197109 Instability when deleting balloons from this drawing.
197170 Instability after Saving revision table template
197171 Blocks no longer move with drawing view
197260 Sketch dimension changes in all configurations when changing the
dimension and setting it to “this configuration”
197268 Area hatch preview doesn't make sense when changing the angle.
197319 GTOL's do not import properly from DXF/DWG
197353 With certain registry settings File/Properties lists do not show
list and cannot edit list
197432 Instability opening drawing
197659 Break-Corner feature only works in folded state. For FIX to take
effect, recreate the Break-Corner feature
197694 Instability copying groove feature
197735 Unable to save this part
197737 Unable to create a reference 'Indication of welding process' weld
symbol
197747 Moving a drawing view around sheet is slower than in SolidWorks
2003 when sheet format contains many sketch entites.
197880 When choosing a radio button to select a certain Anti-Aliasing
quality the slider should move to the corresponding position.
197904 Hitting the escape key after inserting a centermark should not
delete the centermark. Should just end the command.
198020 Entering into the scene editor, clicking on the Room tab, and
then canceling out of the editor prompts the user to apply changes
198026 Instability when selecting the origin from the feature tree for
assembling the component
198049 SolidWorks stops responding when regenerating this part
198051 Unable to drag assembly into another assembly
198052 Instability when editing cosmetic thread featuree.
198080 Instability after deleting stacked balloon, then saving and
closing.
198086 Unable to open this drawing
198171 Instability adding guide curve to a surface-loft that terminates
in a reference point
198207 Feature failures in this part
198217 you cannot multi select components from the Feature Manager and
change their component line font with the Right Mouse Button option fly
out
198473 limit angle mates on chain assembly are causing false over
constraint situation
198526 Spring free length is not maintained.
198589 Unable to save this part document.
198681 Unable to open this drawing
198700 instability when creating a weld bead between two weldment bodies
in a part
198773 Instability when selecting 3D sketch tool while editing a part in
this assembly .
198813 Surface extend generates odd geometry that is incredibly large.
causes geometry to disappear
198938 If geometry scale is left at 1:1 in Insert DXF/DWG import
options, DXF adopts sheet scale
198939 If geometry scale is changed in Insert DXF/DWG import options,
annotations are scaled, but geometry is imported 1:1
198998 'Use custom property value from model shown in:' setting in
drawing sheet properties does not stick, though functionality works
correctly.
199009 Chamfer incorrect after force regen
199115 Unable to drag a reference plane into a folder
199124 Lyy term of the area moments of inertia for this face is reported
as zero. Result is not consisent with info shown for principal moments.
199158 Linked dimensions related to a linear pattern change names when
pattern feature is edited.
199217 Instability applying chamfer with preview enabled
199316 Help documentation for creating a Join Part does not mention to
exit sketch prior to selecting Insert->Join->Feature.
199347 In Solidworks 2004, changing a parallel mate to a distance mate
no longer retains current distance. Jumps to a default.
199618 Components in subassemblies which have color assigned do not
highlight when components are seleted in FM tree.
199689 Fully defined Circular sketch step and repeat is showing as
under-defined. Center shifts with dim changes.
199732 Unable to CamMate a sketch point
199853 Instability when this DXF file is imported as a part
199864 SAT file does not correctly import with colors
199985 After inserting a component into an assembly cannot open file
which is set as READ ONLY
200041 Need RMB hide/show option for SolidWorks Table based BOM
200206 Additional datum feature symbol is not ordered/sequenced
correctly
200349 Instability editing the definition of the broken out section in
this drawing
200677 Tapped Hole depth changes every time that the hole is edited when
document length unit is set to feet & inches
200858 Text within Blocks in this drawing exports at the wrong size.
201428 In BOM, when Part Number column has been deleted and BOM saved to
template, column reappears when template is used.
201432 Instability issue can occur when inserting BOM based on user
template without Part Number into assembly drawing
201452 Sketch is truly overdefined, but status changes to underdefined
when deleting/re-adding relation
201520 SolidWorks Drawing files is becoming corrupt after deleting
drawing view
201921 Instability editing dangling hole table datum
202120 Corrupt files need to be repaired.
202200 Instability flattening sheetmetal part
202728 Corrupt file.
203081 Unable to drag this part into a drawing
203151 'Cannot create this ordinate dimension. The selected entity has
the wrong direction for the current ordinate group.' error message.
204132 Instability using 'Detailed Preview' in a sheet-metal part
Добавлено
Перекинул сюда инфу.
ugk_4088
А ты уверен что она всётаки ЕСТЬ для РУССКОГО ?
Цитата:| Поделитесь, и стоит ли его качать |
Я лично не в курсе, ссылку дай, скачаем посмотрим. Пиши в ПМ.
|
В чертежах, модели или где? 
Только amd64 3000+ от него думаю отличается хорошо, и кешом и контроллером памяти 
