protman
Advanced Member | Редактировать | Профиль | Сообщение | ICQ | Цитировать | Сообщить модератору
- Fixed ECC detection for Ivy Bridge-EX/Haswell-EX chipsets that have a 2nd memory controller
- Fixed ECC errors immediately being reported after starting test (Ivy Bridge-E)
- Updated ImageUSB to v1.1.1015 which includes an option to zero the USB drive
- Running memory tests in parallel mode is now more robust for UEFI BIOS that exhibit inconsistent multiprocessor behaviour
- Fixed detection of the number of enabled processors for UEFI BIOS that exhibit inconsistent multiprocessor behaviour
- Fixed test status screen not being displayed correctly for consoles with small/large screen widths
- Increased maximum # of supported CPUs to 72
- Increased maximum # of supported RAM modules to 64
- In the RAM SPD menu screen, PGUP/PGDN can be used to navigate between pages of RAM modules
- For specific cases where files under EFI\BOOT cannot be accessed (eg. grub2), log/report files shall be written to the root
- directory
- During MemTest86 boot-up, the system memory map is now written to log file
- CPU speed measurement is now more robust by taking multiple samples
- Various optimizations of the size of the MemTest86 binary
- Forced a memory address limit of 32-bits when running under 32-bit UEFI
- Memory ranges to be tested are now allocated at the beginning of each test (due to the possibility that the memory map changes
- in the middle of testing)
- Reduced the number of log messages written when waiting for other processors to finish when running in parallel mode
- When allocating memory for Bit Fade Test, leave 1MB of free memory available (to prevent firmware drivers from running out of memory)
(Beta 2 changes)
- Added Xeon E5 v3 ECC support
- Added Ivy Bridge (non-Xeon) ECC support
- Added AMD Steppe Eagle ECC support
- Fixed Intel5400 ECC registers not being reset after starting test
- Added support for ECC injection for Intel Xeon E3 v3 (untested)
- Fixed certain Xeon chipsets probing non-existant IMC1 SMBUS
- Fixed handling of Intel ICH SMBUS built-in hardware semaphore to prevent SMBus device contention
- Fixed Intel turbo clock speed calculation
- Fixed possible crash when DDR3 module type value in the RAM SPD info is invalid
- Fixed DDR4 SPD clock speed rounding errors in the RAM SPD info
- Fixed DDR3 SPD Register manufacturer/type in the RAM SPD info not appearing correctly
- New config file parameter 'ECCINJECT' for specifying whether to enable/disable ECC injection
- New config file parameter 'MEMCACHE' for specifying whether to enable/disable memory caching
- New config file parameter 'PASS1FULL' for specifying whether the first pass should run the full iteration or reduced iteration
- New config file parameter 'ADDR2CHBITS' to specify the address bits to XOR to determine the memory channel
- New config file parameter 'LANG' for specifying language to use on startup
- Fixed potential crash or other unexpected behaviour due to memory issues with random functions
- Reports are now saved using UTF16 encoding to support Unicode characters
- Increased the number of supported memory controllers to 8
- Changed memory allocation behaviour by only pre-allocating memory segments >= 16MB to prevent memory starvation
- For Test 13 Hammer Test, only run in parallel mode if the memory segment per CPU is >= 32MB (minimum required to support bits being hammered)
- Fixed "Hammer Test" text not appearing in test report
- When mapping memory layout, removed several limits reducing the memory space tested
- Fixed memory being allocated after memory layout has been mapped (thus changing the memory layout)
- Fixed memory leak when cleaning up after test completion
- Fixed memory leak when decoding PNG files
- Fixed progress bar not displaying 0% on completion of a pass
- Console resolution is now forced to 80 x 25
- Graphics resolution is now set to a minimum of 800 x 600
- Updated to new UEFI SDK libraries (UDK2014)
- Fixed memtest86v4 incorrectly booting to serial mode by default
(Beta 3 changes)
- Fixed freeze during initialization of ECC support for Intel E5 v3 (Haswell) due to reading from non-existent MSR register
- Fixed freeze on systems that use older UEFI firmware (such as Mac) that do not support string packages and fonts using the Hii Database. These systems may have limited language support, however.
- Changed minimum resolution to 1024 x 768
- Fixed Main Menu text being overlapped on some systems
- Various system info related fixes (SPD, CPU)
|
Всего записей: 1444 | Зарегистр. 20-05-2003 | Отправлено: 11:01 10-02-2015 | Исправлено: protman, 11:07 10-02-2015 |
|
