Yri
Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
numpa
Undelete 5.0 Home Edition 5.0.114. Русификация не влияет, на другой машине та же проблема. Корзину очищал.
Цитата:| временно убрать файл Exclude.dat и удалить PurgeList.dat из \RecoveryBin? |
Не пробовал. Попробую, отпишусь.
Убирал, переименовывал, убил Undelete, запустил без русика, установил русик - а проблема осталась.
Но, что нашел:
Ошибка возникает при остановке сервиса UndeleteService.
На сайте программы нашел:
Цитата: The Undelete 4.0 service, UdServe.exe, listens on a fixed port for incoming Undelete interface connections. This is port 13621, but if this port is busy, it will use port 14482. The Undelete interface will use whatever port the system assigns it for its end of the connection. If UdServe.exe is allowed to use one of its fixed ports and to accept incoming connections on it, and if the interface is allowed to use whatever ports are assigned to it and to request connections, the Undelete service and interface will connect and the product will work. If your firewall software stops incoming connection requests to all "unknown" ports, then it would need to be told about the two ports that UdServe.exe listens on for Undelete to work.
The port numbers that Undelete uses are in the registry in the HKLM\software\Executive Software\Undelete\FrBin key. The value names are Port0 and Port1. If you want to change the ports to other unused ports you can, but you must change them to the same values on all systems running Undelete that you want to interconnect. You must also make sure at least one of the ports is unused by other software on their systems, or the Undelete service will not start up. |
Outpost Firewall Pro стоит, UdServe.exe следит за сетью, но если сети у меня нет, так может просто убить этот сервис?
|
Всего записей: 262 | Зарегистр. 02-09-2001 | Отправлено: 18:39 12-10-2007 | Исправлено: Yri, 23:02 12-10-2007 |
|
(
