Перейти из форума на сайт.

НовостиФайловые архивы
ПоискАктивные темыТоп лист
ПравилаКто в on-line?
Вход Забыли пароль? Первый раз на этом сайте? Регистрация
Компьютерный форум Ru.Board » Компьютеры » Программы » Настройка MDaemon

Модерирует : gyra, Maz

 Версия для печати • ПодписатьсяДобавить в закладки
Страницы: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

Открыть новую тему     Написать ответ в эту тему

AndreySm



Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору

 
MDaemon Messaging Server – это почтовый сервер, служащий для доступной и безопасной коммуникации в различных организациях.

Всего записей: 146 | Зарегистр. 22-04-2002 | Отправлено: 21:59 15-01-2003 | Исправлено: uzeerpc, 12:49 05-01-2018
jourist



Newbie
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
У меня на сервере установлен MDaemon с плагином от Касперского и NOD32 в качестве антивируса.
Чтобы все работало без конфликтов, в NOD32 - IMON - Setup - POP3 убрал галочку "Enable IMON email checking".
Все работает как часики

Всего записей: 15 | Зарегистр. 23-02-2004 | Отправлено: 13:34 05-10-2006
NickB

Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
я не про это  
я про то чтоб почту именно NOD проверял бы а не плугины всякие

Всего записей: 130 | Зарегистр. 04-07-2002 | Отправлено: 13:46 05-10-2006
ZORDREK



Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
доброго времени суток всем!!!
 Уменя такой вопрос: есть почтовый ящик к нему цепляются через IMAP, в ящике папки пользователей,каждый имеет доступ только к своей папке, как сделать (может с помощью настроек фильтрации) чтобы входящая на этот ящик почта рассыпалась по папкам пользователей? при этом ящик должен остаться IMAP и его нельзя преобразовывать в группу рассылки, приэтом желательнее чтобы всё происходило средствами Mdemon.
 заранее спасибоза помощь.

Всего записей: 41 | Зарегистр. 20-02-2006 | Отправлено: 12:09 11-10-2006
maxvmot

Newbie
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Всем доброго времени сегодня возникла такая проблема.
У меня стоит Mdaemon 907. Все отлично отправляет и принимает. У одного получателя установлен mdaemon 8.1.3 от него ко мне письма без проблем идут. Когда я ему отправляю письма с вложением передается только 8192 байта и почта повисает на оправке, после тайм аута соответственно error 10054/
 вот пример.
Wed 2006-10-18 20:09:08: Session 497; child 1
Wed 2006-10-18 20:07:53: Parsing Message <c:\mdaemon\remoteq\msremq\pd35000045507.msg>
Wed 2006-10-18 20:07:53: From: 11111@mydomen.ru
Wed 2006-10-18 20:07:53: To: 222222@domen.ru
Wed 2006-10-18 20:07:53: Subject: =?windows-1251?Q?=28=E1=E5=E7_=F2=E5=EC=FB=29?=
Wed 2006-10-18 20:07:53: Message-ID: <453650E4.6080809@mydomen.ru>
Wed 2006-10-18 20:07:53: Идет МX-запись разрешение  [domen.ru] (DNS Сервер: 127.0.0.1)...
Wed 2006-10-18 20:07:53: *  P=010 S=000 D=domen.ru TTL=(44) MX=[mail.domen.ru {2.2.2.2}
Wed 2006-10-18 20:07:53: Attempting MX: P=010 S=000 D=domen.ru TTL=(44) MX=[mail.domen.ru] {2.2.2.2}
Wed 2006-10-18 20:07:53: Попытка SMTP соединения с [2.2.2.2 : 25]
Wed 2006-10-18 20:07:53: Ожидание соединения...
Wed 2006-10-18 20:07:54: Соединение установлено (1.1.1.1 : 3859 -> 2.2.2.2 : 25)
Wed 2006-10-18 20:07:54: Ожидание инициации протокола...
Wed 2006-10-18 20:07:54: <-- 220-domen.ru ESMTP MDaemon 8.1.3; Wed, 18 Oct 2006 20:20:38 +0400
Wed 2006-10-18 20:07:54: <-- 220 All transactions and IP adresses are logged
Wed 2006-10-18 20:07:54: --> EHLO vmot.ru
Wed 2006-10-18 20:07:54: <-- 250-ssitrade.ru Hello vmot.ru, pleased to meet you
Wed 2006-10-18 20:07:54: <-- 250-ETRN
Wed 2006-10-18 20:07:54: <-- 250-AUTH=LOGIN
Wed 2006-10-18 20:07:54: <-- 250-AUTH LOGIN CRAM-MD5
Wed 2006-10-18 20:07:54: <-- 250-8BITMIME
Wed 2006-10-18 20:07:54: <-- 250 SIZE 0
Wed 2006-10-18 20:07:54: --> MAIL From:<111111@mydomen.ru> SIZE=1796473
Wed 2006-10-18 20:07:54: <-- 250 <111111@mydomen.ru>, Sender ok
Wed 2006-10-18 20:07:54: --> RCPT To:<222222@mydomen.ru>
Wed 2006-10-18 20:07:54: <-- 250 <222222@mydomen.ru>, Recipient ok
Wed 2006-10-18 20:07:54: --> DATA
Wed 2006-10-18 20:07:54: <-- 354 Enter mail, end with <CRLF>.<CRLF>
Wed 2006-10-18 20:07:54: Отправка <c:\mdaemon\remoteq\msremq\pd35000045507.msg> для [217.175.18.75]
Wed 2006-10-18 20:09:08: Winsock Error 10054 Соединение было перезапущено на друго конце!
Wed 2006-10-18 20:09:08: Ошибка при записи в сокет
Wed 2006-10-18 20:09:08: Возраст этого сообщения равен 3 минутам; осталось 57 минут его нахождения в этой очереди
Wed 2006-10-18 20:09:08: SMTP сессия отменена (Байт принято/передано: 365/8287)

Всего записей: 4 | Зарегистр. 02-09-2006 | Отправлено: 20:32 18-10-2006
olegupb



Advanced Member
Редактировать | Профиль | Сообщение | ICQ | Цитировать | Сообщить модератору
maxvmot
Так это у него проблема! Напиши на постмастера.

----------
~

Всего записей: 734 | Зарегистр. 09-02-2005 | Отправлено: 21:40 18-10-2006
segreich

Newbie
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Может кто объяснить, почему если у внутреннего адреса стоит пересылка (forward)  писем на два других внутренних адреса, то демон пытается отправить эти письма через внешний почтовый сервер, а не через себя?
Внутренняя пересылка с адреса на адрес идет без проблем через демона, а вот с форвардом какой-то глюк.
 
Mdaemon 9.0.7
 
Thu 2006-10-19 16:15:57: From: mail@domain.ru
Thu 2006-10-19 16:15:57: To: mail1@domain.ru mail2@domain.ru
Thu 2006-10-19 16:15:57: MX-record resolution of [domain.ru] in progress (DNS Server: xxx.xxx.xxx.xxx)...
Thu 2006-10-19 16:15:57: *  P=010 S=000 D=domain.ru TTL=(15) MX=[mx1.masterhost.ru] {xxx.xxx.xxx.xxx}
Thu 2006-10-19 16:15:57: Attempting MX: P=010 S=000 D=domain.ru TTL=(15) MX=[mx1.masterhost.ru] {xxx.xxx.xxx.xxx}
Thu 2006-10-19 16:15:57: Attempting SMTP connection to [xxx.xxx.xxx.xxx : 25]
Thu 2006-10-19 16:15:57: Waiting for connection...
Thu 2006-10-19 16:15:57: Connection established (192.168.1.2 : 24146 -> xxx.xxx.xxx.xxx : 25)
Thu 2006-10-19 16:15:57: Waiting for protocol initiation...
Thu 2006-10-19 16:16:16: <-- 220 mx-8.masterhost.ru ESMTP
Thu 2006-10-19 16:16:16: --> EHLO domain.ru
Thu 2006-10-19 16:16:16: <-- 250-mx-8.masterhost.ru
Thu 2006-10-19 16:16:16: <-- 250-PIPELINING
Thu 2006-10-19 16:16:16: <-- 250 8BITMIME
Thu 2006-10-19 16:16:16: --> MAIL From:<mail@domain.ru>
Thu 2006-10-19 16:16:17: <-- 250 ok
Thu 2006-10-19 16:16:17: --> RCPT To:<mail1@domain.ru mail2@domain.ru>
Thu 2006-10-19 16:16:17: <-- 533 sorry, your envelope recipient has been denied (#5.7.1)
Thu 2006-10-19 16:16:17: --> QUIT

Всего записей: 29 | Зарегистр. 24-08-2006 | Отправлено: 16:28 19-10-2006
maxvmot

Newbie
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
olegupb
Я понимаю что у него, что ему посоветовать покопать?

Всего записей: 4 | Зарегистр. 02-09-2006 | Отправлено: 19:31 19-10-2006
olegupb



Advanced Member
Редактировать | Профиль | Сообщение | ICQ | Цитировать | Сообщить модератору
maxvmot

Цитата:
... что ему посоветовать покопать?  

Как по мне, то у него какой-то файрволл рубит или антивирус

----------
~

Всего записей: 734 | Зарегистр. 09-02-2005 | Отправлено: 19:41 19-10-2006 | Исправлено: olegupb, 19:42 19-10-2006
maxvmot

Newbie
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
грит что с другими адресами у него проблем нет...

Всего записей: 4 | Зарегистр. 02-09-2006 | Отправлено: 19:46 19-10-2006
olegupb



Advanced Member
Редактировать | Профиль | Сообщение | ICQ | Цитировать | Сообщить модератору
maxvmot

Цитата:
грит что с другими адресами у него проблем нет...

А что у него логи пишут, раз уж на то пошло?

----------
~

Всего записей: 734 | Зарегистр. 09-02-2005 | Отправлено: 21:49 19-10-2006
maxvmot

Newbie
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Попрошу сегодня логи выслать...

Всего записей: 4 | Зарегистр. 02-09-2006 | Отправлено: 08:51 20-10-2006
Wolfrm



Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Ламерский вопрос но все-же ненашел ответа нанего
как запретить проход сообщения на несколько адресов если один из них "Recipient unknown"

Всего записей: 202 | Зарегистр. 24-03-2006 | Отправлено: 05:40 23-10-2006
A_N_Tolik

Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Ситуевина: чел постоянно бегает по коммандировкам, и приходится постоянно делать ему переадресацию почты с доменного ящика на внешний.
Есть ли система служебных комманд, посволяющая ему с помощью команды в теле письма/в теме делать это самому?
Поиск в хелпе /как обычно/ ничего не дал...

Всего записей: 62 | Зарегистр. 07-06-2005 | Отправлено: 14:18 23-10-2006
jourist



Newbie
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
[q][/q]
Command             Special Parms   Result
============================================================================
ACCOUNT INFO        none            The status of the account passed in
                                    the subject line is mailed back to
                                    the message originator.
                                    ex: ACCOUNT INFO
 
PASSWORD            new password    The password of the account passed in
                                    the subject line will be changed to the
                                    one specified.
                                    ex: PASSWORD kryptonite
 
MAILFORMAT          MBF file        The mailbox storage format of the
                                    account specified in subject line
                                    will be changed to the one specified.
                                    A listing of the available formats
                                    can be obtained via the MAIL FORMATS
                                    directive.
                                    ex: MAILBOX RFC822
 
FORWARD TO          address         The forwarding address of the account
                                    passed in the subject line will be
                                    changed to the one specified and act-
                                    ivated.
                                    ex: FORWARD TO vacationing@myhost.com
 
UNFORWARD           none            Mail forwarding will be deactivated for
                                    the account specified in the subject
                                    line.
                                    Ex: UNFORWARD
 
AUTODECODE          switch          Automatic decoding of incoming MIME
                                    attachments for the account specified
                                    in the subject line will be set to
                                    <switch> which should be Y or N.
                                    ex: AUTODECODE N
 
BEGIN SIGNATURE     none            Begins recording of a new signature
                                    file to be appended to messages
                                    generated by the account passed in
                                    the subject line.  Subsequent lines
                                    will be treated as the text of the
                                    signature file until the word END
                                    is encountered on a line by itself
                                    or the end of the control message
                                    is reached.  NOTE: The signature file
                                    feature is only available for RAW
                                    format messages.
 
BEGIN AUTORESPONDER none            Begins recording of a new autoresponder
                                    file to be used by the account passed  
                                    in the subject line.  Subsequent lines
                                    will be treated as the text of the
                                    autoresponder file until the word END
                                    is encountered on a line by itself
                                    or the end of the control message
                                    is reached.
                                    ex: BEGIN AUTORESPONDER  
                                        Some autoresponder text here
                                        END
 
                                    To erase an active autoresponder define
                                    one with no text like this:
                                    ex: BEGIN AUTORESPONDER
                                        END                                      
 
MULTIPOP            switch          MultiPOP mail collection for the account  
                                    passed in the subject line is turned
                                    on or off according to the value of
                                    switch.  Switch should be ON or OFF.
                                    ex: MULTIPOP OFF                                    
 
RULES               none            Returns a form for editing all rules  
                                    configured for the account passed in the
                                    subject line.  The form can mark existing
                                    rules for deletion and can add new rules.
 
List, Catalog, and Process Control: - The following commands do not
    require an account on the mail server although some of them are
    password protected.  The subject line is ignored when processing
    these commands.
 
Command         Special Parms       Result
============================================================================
USERS           none                A listing of all users hosted by
                                    the server will be mailed back to
                                    the originator.  Accounts which are set
                                    as hidden will not be listed.  Also,
                                    this command is inactive unless enabled
                                    via switch in Misc. Options screen.
 
LIST            [listname]          A listing of all mailing lists along with  
                                    the names and address of members will be  
                                    mailed back to the originator.  Lists
                                    must be individually configured to allow
                                    this to occur.  Passing an optional list
                                    name will return the members of only that
                                    list.  Member names are returned only for
                                    members which are local accounts within
                                    MDaemon.
 
SUBSCRIBE       listname [address] {real name}
                                    The originator is added to the member-
                                    ship of the list specified provided that  
                                    list exists and allows remote  
                                    subscriptions.  If an optional address is
                                    specified after the listname then that  
                                    address is added rather than the address  
                                    found in the FROM: field of the
                                    subscription message.  
                                    ex: SUBSCRIBE mygroup@domain.com
                                    ex: SUBSCRIBE mygroup@domain.com
                                       arvel@altn.com {Arvel Hathcock}
 
UNSUBSCRIBE     listname [address]  The originator is removed from the
or                                  specified mailing list provided the list
SIGNOFF                             exists and contains the originator as a  
                                    member.  If the optional 'address' is
                                    specified then that address is removed.                                    
                                    ex: UNSUBSCRIBE mygroup@domain.com
                                    ex: UNSUBSCRIBE mygroup@domain.com
                                           me@mydomain.com
 
UPDATE          listname old-address new-address {real name} (password)
                                    Removes 'old-address' from the list and
                                    replaces it with new-address.  An optional
                                    real name and password value may be given.
                                    ex: UPDATE mygroup@domain.com  
                                       old@address.com new@address.com
                                    ex: SUBSCRIBE mygroup@domain.com
                                       old@address.com new@address.com
                                       {Frank Thomas} (pass)
 
SUPPRESS        listname address (password)
                                    This command adds 'address' to the lists
                                    suppression file.  The list's password
                                    must be provided and the list must already
                                    have a suppression file associated with
                                    it.
                                    ex: SUPPRESS list@mydomain.com
                                            me@mydomain.com (PASS)  
 
UNSUPPRESS      listname address (password)
                                    This command removes 'address' from the  
                                    lists suppression file.  The list's  
                                    password must be provided and the list  
                                    must already have a suppression file  
                                    associated with it.  
                                    ex: UNSUPPRESS list@mydomain.com
                                            me@mydomain.com (PASS)  
 
DIGEST          listname [address]  This command sets 'address' to use digest
                                    mode.  If no address is specified then the
                                    address of the originator of the message
                                    will be used.
                                    ex: DIGEST list@mydomain.com  
                                            me@mydomain.com
 
NORMAL          listname [address]  This command sets 'address' to use normal
                                    non-digest mode.  If no address is given
                                    then the originator of the message will be
                                    used.
                                    ex: NORMAL list@mydomain.com  
                                            me@mydomain.com
 
NOMAIL          listname [address]  This command sets 'address' to nomail mode.
                                    The account will enter a suspended state
                                    and will no longer receive list traffic.
                                    If no address is specified then the orig-
                                    inator of the message will be used.
                                    ex: NOMAIL list@mydomain.com  
                                            me@mydomain.com
 
MAIL            listname [address]  This command returns 'address' to normal  
                                    mode from nomail mode.  If no address is  
                                    specified then the originator of the message
                                    will be used.
                                    ex: MAIL list@mydomain.com  
                                            me@mydomain.com
 
REALNAME        listname [address] {Real Name}
                                 
                                    This command sets the real name value for
                                    'address' who is a member of list 'listname'
                                    to the given value.  The Real Name parm must
                                    be enclosed in { and } characters.
                                    ex: REALNAME list@mydomain.com  
                                            me@mydomain.com {Arvel Hathcock}
 
 
GET             catalog magic-name (Password)
 
                                    Retrieves a file from the specified
                                    catalog, MIME encodes it in an email
                                    message, and sends that message to the
                                    originating account or to the one
                                    specified in a RESULTS TO directive.
                                    NOTE: The PUBLIC catalog doesn't require
                                    a catalog name or password.
                                    ex: GET utils magic-name (mypassword)
                                    ex: GET magic-name
 
DIR             catalog             Retrieves a directory of the files and
                                    magic names available through the catalog.
                                    ex: DIR public
 
 
 
General: - The subject line is ignored while processing these commands.
 
Command        Special Parameters   Result
============================================================================
HELP           none                 This file is mailed back to the
                                    originator.
 
RESULTS TO     address              Subsequent commands which generate
                                    output will direct that output to
                                    the address specified.
                                    ex: RESULTS TO mailbox@host.org
 
STATUS         none                 A status report on server operations
                                    and current conditions will be mailed
                                    back to the message originator.  Since
                                    the information contained in this status
                                    report is considered private, the sub-
                                    ject of the requested message must con-
                                    tain the user name and password of an
                                    administrator level user account like
                                    this:  Arvel, 12wsawe
                                    ex: STATUS
 
MAIL FORMATS        none            A listing of all the supported
                                    mailbox formats will be mailed back
                                    to the originator.
                                    Ex: MAIL FORMATS
 
GET ADDRESS    none                 MDaemon will send a message back to the
                                    originator which will contain the current
                                    machine name and IP address assigned to
                                    MDaemon's computer.  This is useful when
                                    you want to find out the IP address
                                    assigned by your ISP when using a dynamic
                                    dialup situation.  Since the information
                                    contained in this message is considered
                                    private the subject of the requesting
                                    message must contain the MDConfig
                                    administrator level user and password such
                                    as: Administrator, Password.
                                    Note:  The address returned is the one
                                    Windows feels like giving.  It could
                                    return your local LAN card IP address as
                                    easily as an ISP assigned one.  Until I get
                                    a foolproof method worked out don't depend
                                    on this feature.
                                    ex:  GET ADDRESS
 
============================================================================
End of help file

Всего записей: 15 | Зарегистр. 23-02-2004 | Отправлено: 15:01 23-10-2006
TbIrbIDbIM



Full Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Не могу понять одной вещи:
Mdaemon может импортировать в себя данные из LDAP, т.е. чтобы я прописывал пользователям в свойствах мыло (в LDAP), а они автоматом создавались(удалялись, редактировались) в MDaemon?
 
Т.е. чтобы MDaemon читал все настройки из моих OU.

----------
МИРЭА

Всего записей: 479 | Зарегистр. 26-10-2003 | Отправлено: 14:31 25-10-2006 | Исправлено: TbIrbIDbIM, 11:51 26-10-2006
A_N_Tolik

Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Хелпарий прочел.
Спасибо
 
Только вот все равно -  отправляю я на:  
mdaemon@my_domain.com  
письмо, с темой:  
my_box@my_domain.com, password_to_my_box  
в теле письма указываю:  
forward to new_box@other_domain.com  
 
и нифига не происходит...  
в свойствах ящика разрешено управление при помощи команд.  
 
Не подскажет ли всезнающий ALL - куда копать?

Всего записей: 62 | Зарегистр. 07-06-2005 | Отправлено: 12:18 30-10-2006
ShamaN



Advanced Member
Редактировать | Профиль | Сообщение | ICQ | Цитировать | Сообщить модератору
A_N_Tolik
 
а у пользователя в настройках влючена галочка разрешения изменения с помощью писем?

Всего записей: 1297 | Зарегистр. 23-09-2004 | Отправлено: 10:22 31-10-2006
A_N_Tolik

Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Версия Демона - 7.1.0
Смотрю в свойства учетной записи, вкладка "ОПЦИИ", чек на "Разрешить изменение настроек учетной записи через email сообщения" установлен.

Всего записей: 62 | Зарегистр. 07-06-2005 | Отправлено: 15:23 31-10-2006
Abiks



Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Ребята, такая трабла... MD 6.8.4 не отправляется почта на @***.ae \ hu \ th \ некоторые ru \ ; возврат с uz \ hotmaie. Ранее с MD дела не имел. Может ли трабла быть в провайдере? Или всеже в MD? Срочно надо решать проблемму. HELP TO ALL

Всего записей: 95 | Зарегистр. 15-02-2005 | Отправлено: 14:01 01-11-2006
zenia



Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору

Цитата:
Ребята, такая трабла... MD 6.8.4 не отправляется почта  

 
А логи кто будет показывать?

Всего записей: 151 | Зарегистр. 17-01-2003 | Отправлено: 14:25 01-11-2006
Открыть новую тему     Написать ответ в эту тему

Страницы: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

Компьютерный форум Ru.Board » Компьютеры » Программы » Настройка MDaemon


Реклама на форуме Ru.Board.

Powered by Ikonboard "v2.1.7b" © 2000 Ikonboard.com
Modified by Ru.B0ard
© Ru.B0ard 2000-2024

BitCoin: 1NGG1chHtUvrtEqjeerQCKDMUi6S6CG4iC

Рейтинг.ru