Sun Ray
Full Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
только у меня лежит в другом месте граб, ставил из пакаэджей, сам туда поставился...
Код: # cat /grub/menu.lst
#Grub config file for NetBSD/xen. Copy as /grub/menu.lst and run
# grub-install /dev/rwd0d (assuming your boot device is wd0).
#
# The default entry to load will be the first one
default=0
# boot after 10s the default entry if the user didn't hit keyboard
timeout=10
# Configure serial port to use as console. Ignore if you'll use VGA only
serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1
# Let the user select which console to use (serial or VGA), default
# to serial after 10s
terminal --timeout=10 serial console
# An entry for NetBSD/xen, using /netbsd as the domain0 kernel, and serial
# console. Domain0 will have 64MB RAM allocated.
# Assume NetBSD is installed in the first MBR partition.
title Xen 2.0 / NetBSD (hda0, serial)
root(hd0,0)
kernel (hd0,a)/xen.gz dom0_mem=65536 com1=115200,8n1
module (hd0,a)/netbsd root=/dev/hda1 ro console=ttyS0
# Same as above, but using VGA console
# We can use console=tty0 (Linux syntax) or console=pc (NetBSD syntax)
title Xen 2.0 / NetBSD (hda0, vga)
root(hd0,0)
kernel (hd0,a)/xen.gz dom0_mem=65536
module (hd0,a)/netbsd root=/dev/hda1 ro console=tty0
# NetBSD/xen using a backup domain0 kernel (in case you installed a
# nonworking kernel as /netbsd
title Xen 2.0 / NetBSD (hda0, backup, serial)
root(hd0,0)
kernel (hd0,a)/xen.gz dom0_mem=65536 com1=115200,8n1
module (hd0,a)/netbsd.backup root=/dev/hda1 ro console=ttyS0
title Xen 2.0 / NetBSD (hda0, backup, VGA)
root(hd0,0)
kernel (hd0,a)/xen.gz dom0_mem=65536
module (hd0,a)/netbsd.backup root=/dev/hda1 ro console=tty0
#Load a regular NetBSD/i386 kernel. Can be useful if you end up with a
#nonworking /xen.gz
title NetBSD 3.0
root (hd0,a)
kernel --type=netbsd /netbsd.generic
#Load the NetBSD bootloader, letting it load the NetBSD/i386 kernel.
#May be better than the above, as grub can't pass all required infos
#to the NetBSD/i386 kernel (e.g. console, root device, ...)
title NetBSD chain
root (hd0,0)
chainloader +1
## end of grub config file.
|
|
