[root@localhost buxar]# dmesg
Linux version 2.6.29.6-desktop-2mnb (qateam@titan.mandriva.com) (gcc version 4.3.2 (GCC) ) #1 SMP Sun Aug 16 23:23:47 EDT 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005dfd0000 (usable)
BIOS-e820: 000000005dfd0000 - 000000005dfde000 (ACPI data)
BIOS-e820: 000000005dfde000 - 000000005e000000 (ACPI NVS)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x5dfd0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 37c61000 - 37fefa26
Allocated new RAMDISK: 00660000 - 009eea26
Move RAMDISK from 0000000037c61000 - 0000000037fefa25 to 00660000 - 009eea25
ACPI: RSDP 000F73E0, 0014 (r0 ACPIAM)
ACPI: RSDT 5DFD0000, 0030 (r1 A M I OEMRSDT 1000609 MSFT 97)
ACPI: FACP 5DFD0200, 0084 (r2 A M I OEMFACP 1000609 MSFT 97)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 5DFD03F0, 71EA (r1 1ABXK 1ABXK004 4 INTL 2002026)
ACPI: FACS 5DFDE000, 0040
ACPI: APIC 5DFD0390, 0054 (r1 A M I OEMAPIC 1000609 MSFT 97)
ACPI: OEMB 5DFDE040, 0046 (r1 A M I AMI_OEM 1000609 MSFT 97)
ACPI: Local APIC address 0xfee00000
615MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00011000 - 00017f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000065c4a4] TEXT DATA BSS ==> [0000100000 - 000065c4a4]
#4 [000065d000 - 0000660000] INIT_PG_TABLE ==> [000065d000 - 0000660000]
#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000660000 - 00009eea26] NEW RAMDISK ==> [0000660000 - 00009eea26]
#8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0005dfd0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0005dfd0
On node 0 totalpages: 384863
free_area_init_node: node 0, pgdat c0508f00, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 1232 pages used for memmap
HighMem zone: 156418 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 60000000 (gap: 5e000000:a1780000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Allocating 40960 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 381855
Kernel command line: BOOT_IMAGE=linux root=UUID=6f1c7b89-9b93-4e90-b7f3-5ff895b4859f resume=UUID=e35200dd-9a10-4039-834e-0cd2be264945 splash=silent vga=788
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1999.938 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1516552k/1539904k available (2757k kernel code, 22064k reserved, 1606k data, 460k init, 630600k highmem)
virtual kernel memory layout:
fixmap : 0xffe17000 - 0xfffff000 (1952 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc054a000 - 0xc05bd000 ( 460 kB)
.data : 0xc03b14ed - 0xc0542f08 (1606 kB)
.text : 0xc0100000 - 0xc03b14ed (2757 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.87 BogoMIPS (lpj=1999938)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20081204
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Mobile AMD Sempron(tm) Processor 3300+ stepping 02
Brought up 1 CPUs
Total of 1 processors activated (3999.87 BogoMIPS).
CPU0 attaching NULL sched-domain.
net_namespace: 1056 bytes
Booting paravirtualized kernel on bare hardware
Time: 2:02:48 Date: 09/27/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning (dsobject-0502): Package List length (CA) larger than NumElements count (4), truncated
[20081204]
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
pci 0000:00:02.5: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:02.5: PME# supported from D3cold
pci 0000:00:02.5: PME# disabled
pci 0000:00:02.6: reg 10 io port: [0xe800-0xe8ff]
pci 0000:00:02.6: reg 14 io port: [0xec00-0xec7f]
pci 0000:00:02.6: PME# supported from D3hot D3cold
pci 0000:00:02.6: PME# disabled
pci 0000:00:02.7: reg 10 io port: [0xe400-0xe4ff]
pci 0000:00:02.7: reg 14 io port: [0xe000-0xe07f]
pci 0000:00:02.7: supports D1 D2
pci 0000:00:02.7: PME# supported from D3hot D3cold
pci 0000:00:02.7: PME# disabled
pci 0000:00:03.0: reg 10 32bit mmio: [0xdffff000-0xdfffffff]
pci 0000:00:03.1: reg 10 32bit mmio: [0xdfffe000-0xdfffefff]
pci 0000:00:03.2: reg 10 32bit mmio: [0xdfffd000-0xdfffdfff]
pci 0000:00:03.3: reg 10 32bit mmio: [0xdfffc000-0xdfffcfff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:09.0: reg 10 32bit mmio: [0xdfffa000-0xdfffbfff]
pci 0000:00:0a.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0a.1: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:00:0a.1: supports D1 D2
pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.1: PME# disabled
pci 0000:00:0a.2: reg 10 32bit mmio: [0xdfff9800-0xdfff9fff]
pci 0000:00:0a.2: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.2: PME# disabled
pci 0000:00:0b.0: reg 10 io port: [0xd800-0xd8ff]
pci 0000:00:0b.0: reg 14 32bit mmio: [0xdfff9400-0xdfff94ff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xdeee0000-0xdeefffff]
pci 0000:01:00.0: reg 18 io port: [0xac00-0xac7f]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
pci 0000:00:01.0: bridge 32bit mmio: [0xdee00000-0xdeefffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xcad00000-0xdacfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: Power Resource [GFAN] (off)
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - C1, should be BB [20081204]
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
system 00:09: ioport range 0x290-0x297 has been reserved
system 00:09: ioport range 0xc00-0xc05 has been reserved
system 00:09: ioport range 0xd00-0xd05 has been reserved
system 00:0a: ioport range 0x480-0x48f has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x800-0x8df has been reserved
system 00:0a: ioport range 0x8e0-0x8ff has been reserved
system 00:0a: ioport range 0x864-0x8a3 has been reserved
system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved
system 00:0a: iomem range 0xffe80000-0xffefffff has been reserved
system 00:0a: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0x5fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xa000-0xafff
pci 0000:00:01.0: MEM window: 0xdee00000-0xdeefffff
pci 0000:00:01.0: PREFETCH window: 0x000000cad00000-0x000000dacfffff
pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02
pci 0000:00:0a.0: IO window: 0x001000-0x0010ff
pci 0000:00:0a.0: IO window: 0x001400-0x0014ff
pci 0000:00:0a.0: PREFETCH window: 0x60000000-0x63ffffff
pci 0000:00:0a.0: MEM window: 0x64000000-0x67ffffff
pci 0000:00:0a.1: CardBus bridge, secondary bus 0000:06
pci 0000:00:0a.1: IO window: 0x001800-0x0018ff
pci 0000:00:0a.1: IO window: 0x001c00-0x001cff
pci 0000:00:0a.1: PREFETCH window: 0x68000000-0x6bffffff
pci 0000:00:0a.1: MEM window: 0x6c000000-0x6fffffff
pci 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:0a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
pci_bus 0000:01: resource 1 mem: [0xdee00000-0xdeefffff]
pci_bus 0000:01: resource 2 mem: [0xcad00000-0xdacfffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 io: [0x1000-0x10ff]
pci_bus 0000:02: resource 1 io: [0x1400-0x14ff]
pci_bus 0000:02: resource 2 mem: [0x60000000-0x63ffffff]
pci_bus 0000:02: resource 3 mem: [0x64000000-0x67ffffff]
pci_bus 0000:06: resource 0 io: [0x1800-0x18ff]
pci_bus 0000:06: resource 1 io: [0x1c00-0x1cff]
pci_bus 0000:06: resource 2 mem: [0x68000000-0x6bffffff]
pci_bus 0000:06: resource 3 mem: [0x6c000000-0x6fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 3642k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1254016968.576:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Hook version: 2.6.29 2009/03/24
msgmni has been set to 1739
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 1875k, total 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at cbe6:000c
vesafb: pmi: set display start = c00cbe96, set palette = c00cbeda
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
serial 0000:00:02.6: PCI INT C disabled
brd: module loaded
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
PM: Resume from partition UUID=e35200dd-9a10-4039-834e-0cd2be264945
PM: Checking hibernation image.
PM: Error -6 checking image file
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 9:218:6
acpi PNP0510:00: hash matches
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 460k freed
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
pata_sis 0000:00:02.5: version 0.5.2
scsi0 : pata_sis
scsi1 : pata_sis
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata1.00: ATA-7: FUJITSU MHV2060AT PL, 000000A0, max UDMA/100
ata1.00: 117210240 sectors, multi 16: LBA
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2060A 0000 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.01: ATAPI: TSSTcorp CDDVDW SN-S082H, SB01, max UDMA/33
ata2.01: configured for UDMA/33
scsi 1:0:1:0: CD-ROM TSSTcorp CDDVDW SN-S082H SB01 PQ: 0 ANSI: 5
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ohci1394 0000:00:0a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[dfff9800-dfff9fff] Max Packet=[2048] IR/IT contexts=[4/4]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000358a056]
PM: Marking nosave pages: 000000000009f000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
TomoyoLinux Mandatory Access Control disabled by default.
You need to install ccs-tools if you want to enable it.
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button (CM) [SLPB]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FN00] (off)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: duty_cycle spans bit 4
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device1
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram
asus-laptop: Asus Laptop Support version 0.42
asus-laptop: A6U model detected
input: Asus Laptop extra buttons as /devices/virtual/input/input6
Registered led device: asus::mail
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC0] (on-line)
IT8705 SuperIO detected.
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
Marking TSC unstable due to TSC halts in idle
Linux agpgart interface v0.103
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input7
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ppdev: user-space parallel port driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 20, io mem 0xdffff000
Non-volatile memory driver v1.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.6-desktop-2mnb ohci_hcd
usb usb1: SerialNumber: 0000:00:03.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:03.3: cache line size of 64 is not supported
ehci_hcd 0000:00:03.3: irq 23, io mem 0xdfffc000
powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3300+ processors (1 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10
powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x12
powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x13
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29.6-desktop-2mnb ehci_hcd
usb usb2: SerialNumber: 0000:00:03.3
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
agpgart-sis 0000:00:00.0: SiS chipset [1039/0760]
agpgart-sis 0000:00:00.0: AGP aperture is 4M @ 0xe0000000
ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xdfffe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29.6-desktop-2mnb ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
agpgart-sis 0000:00:00.0: AGP bridge [1039/0760]
BUG: unable to handle kernel NULL pointer dereference at 00000008
IP: [<f83b01c0>] agp_generic_create_gatt_table+0x140/0x1c0 [agpgart]
*pde = 00000000
Oops: 0000 [#1] SMP
last sysfs file: /sys/module/freq_table/initstate
Modules linked in: cpufreq_ondemand cpufreq_conservative cpufreq_powersave amd64_agp(+) powernow_k8 freq_table sis_agp ehci_hcd nvram ohci_hcd(+) ppdev usbcore video output agpgart k8temp thermal parport_pc parport asus_laptop rtc_cmos ac joydev processor battery led_class fan button evdev sbp2 ohci1394 ieee1394 ata_generic ide_pci_generic pata_acpi sis5513 ide_gd_mod ide_core pata_sis libata sd_mod scsi_mod crc_t10dif ext3 jbd
Pid: 856, comm: modprobe Not tainted (2.6.29.6-desktop-2mnb #1) A6U
EIP: 0060:[<f83b01c0>] EFLAGS: 00010246 CPU: 0
EIP is at agp_generic_create_gatt_table+0x140/0x1c0 [agpgart]
EAX: 00000000 EBX: 000003ae ECX: 00000010 EDX: 00000002
ESI: f71f0f00 EDI: f8061e20 EBP: f6b4bca8 ESP: f6b4bc8c
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process modprobe (pid: 856, ti=f6b4a000 task=f6b5d4e0 task.ti=f6b4a000)
Stack:
f6b4bc98 f71c4d00 00000000 00000010 000003ae 00000400 f8061e20 f6b4bcd8
f83ae25c 00000000 04000000 f6b4bcd8 f80616f0 f80622ea f71f0f00 00000001
e0000000 00000000 f72da400 f6b4bd40 f806182d f6b4bd28 f82e86ef f72da4c8
Call Trace:
[<f83ae25c>] ? agp_add_bridge+0x10c/0x440 [agpgart]
[<f80616f0>] ? agp_aperture_valid+0xa0/0xde [amd64_agp]
[<f806182d>] ? agp_amd64_probe+0xff/0x5f4 [amd64_agp]
[<f804d0c6>] ? agp_amd64_init+0xc6/0xd5 [amd64_agp]
[<f804d000>] ? agp_amd64_init+0x0/0xd5 [amd64_agp]
[<c0101116>] ? do_one_initcall+0x26/0x1c0
[<c01243de>] ? resched_task+0x1e/0x70
[<c012f3fb>] ? __cond_resched+0x1b/0x40
[<c03ac566>] ? _spin_lock_irq+0x16/0x20
[<c03aaa50>] ? wait_for_common+0xc0/0x130
[<c01ae656>] ? percpu_free+0x46/0x50
[<c01ae656>] ? percpu_free+0x46/0x50
[<c01ae656>] ? percpu_free+0x46/0x50
[<c0166dec>] ? stop_machine_destroy+0x3c/0x40
[<c015cb75>] ? load_module+0xa5/0x1c50
[<f8061000>] ? amd64_fetch_size+0x0/0xb0 [amd64_agp]
[<c013a330>] ? __request_region+0x0/0xe0
[<c03ab0eb>] ? mutex_lock+0xb/0x20
[<c03ab0eb>] ? mutex_lock+0xb/0x20
[<c0179316>] ? tracepoint_update_probe_range+0x76/0xa0
[<c017936f>] ? tracepoint_module_notify+0x2f/0x40
[<c03af0cd>] ? notifier_call_chain+0x2d/0x70
[<c014d70d>] ? __blocking_notifier_call_chain+0x4d/0x60
[<c014d73a>] ? blocking_notifier_call_chain+0x1a/0x20
[<c015e7b6>] ? sys_init_module+0x96/0x1d0
[<c01b117d>] ? sys_read+0x3d/0x70
[<c01053db>] ? sysenter_do_call+0x12/0x2f
Code: db 66 90 8d 04 9d 00 00 00 00 8b 4e 24 89 c2 03 56 1c 89 0a 03 46 1c 8b 00 83 c3 01 3b 5d e8 7c e2 31 c0 e9 e4 fe ff ff 8d 76 00 <8b> 78 08 8b 40 04 89 fa 89 45 e8 e9 21 ff ff ff 8b 56 04 83 45
EIP: [<f83b01c0>] agp_generic_create_gatt_table+0x140/0x1c0 [agpgart] SS:ESP 0068:f6b4bc8c
---[ end trace 5586e612f35ab89d ]---
ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0xdfffd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.29.6-desktop-2mnb ohci_hcd
usb usb4: SerialNumber: 0000:00:03.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
yenta_cardbus 0000:00:0a.0: CardBus bridge found [1043:1107]
yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0c38, PCI irq 17
yenta_cardbus 0000:00:0a.0: Socket status: 30000006
yenta_cardbus 0000:00:0a.1: CardBus bridge found [1043:1107]
yenta_cardbus 0000:00:0a.1: ISA IRQ mask 0x0c38, PCI irq 18
yenta_cardbus 0000:00:0a.1: Socket status: 30000006
usb 2-3: new high speed USB device using ehci_hcd and address 4
usb 2-3: New USB device found, idVendor=12d1, idProduct=1003
usb 2-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 2-3: Product: HUAWEI Mobile
usb 2-3: Manufacturer: HUAWEI Technology
usb 2-3: configuration #1 chosen from 1 choice
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
usb 2-5: new high speed USB device using ehci_hcd and address 5
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
EXT3 FS on sda5, internal journal
usb 2-5: New USB device found, idVendor=1a40, idProduct=0101
usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-5: Product: USB 2.0 Hub [MTT]
usb 2-5: configuration #1 chosen from 1 choice
hub 2-5:1.0: USB hub found
hub 2-5:1.0: 4 ports detected
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
option 2-3:1.0: GSM modem (1-port) converter detected
usb 2-3: GSM modem (1-port) converter now attached to ttyUSB0
option 2-3:1.1: GSM modem (1-port) converter detected
usb 2-3: GSM modem (1-port) converter now attached to ttyUSB1
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
Initializing USB Mass Storage driver...
usb-storage: probe of 2-3:1.2 failed with error -1
usb-storage: probe of 2-3:1.3 failed with error -1
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1: new low speed USB device using ohci_hcd and address 2
usb 1-1: New USB device found, idVendor=15d9, idProduct=0a41
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB Mouse
usb 1-1: configuration #1 chosen from 1 choice
usb 3-1: new low speed USB device using ohci_hcd and address 2
usbcore: registered new interface driver hiddev
input: USB Mouse as /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1:1.0/input/input8
generic-usb 0003:15D9:0A41.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:03.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 3-1: New USB device found, idVendor=1241, idProduct=1503
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Keyboard
usb 3-1: Manufacturer:
usb 3-1: configuration #1 chosen from 1 choice
input: USB Keyboard as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input9
generic-usb 0003:1241:1503.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:03.1-1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.1/input/input10
generic-usb 0003:1241:1503.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:03.1-1/input1
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.11)
Adding 3204928k swap on /dev/sda6. Priority:-1 extents:1 across:3204928k
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:1:0: Attached scsi generic sg1 type 5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
slamr: module license 'Smart Link Ltd.' taints kernel.
slamr: SmartLink AMRMO modem.
slamr: probe 1039:7013 SiS630 card...
slamr 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
slamr: mc97 codec is CXT23
slamr: slamr0 is SiS630 card.
b43-pci-bridge 0000:00:09.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
8139too Fast Ethernet driver 0.9.28
ssb: Sonics Silicon Backplane found on PCI device 0000:00:09.0
8139too 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
eth0: RealTek RTL8139 at 0xf807c400, 00:17:31:a0:22:36, IRQ 19
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
input: PC Speaker as /devices/platform/pcspkr/input/input11
cfg80211: Calling CRDA to update world regulatory domain
b43-phy0: Broadcom 4318 WLAN found
b43-phy0 debug: Found PHY: Analog 3, Type 2, Revision 7
b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
intel8x0_measure_ac97_clock: measured 50867 usecs
intel8x0: clocking to 48000
wmaster0 (b43): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0 (b43): not using net_device_ops yet
Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
PPP generic driver version 2.4.2
padlock: VIA PadLock Hash Engine not detected.
PPP MPPE Compression module registered
PPP BSD Compression module registered
PPP Deflate Compression module registered
input: b43-phy0 as /devices/virtual/input/input12
b43 ssb0:0: firmware: requesting b43/ucode5.fw
b43 ssb0:0: firmware: requesting b43/pcm5.fw
b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
b43-phy0 debug: Chip initialized
b43-phy0 debug: 32-bit DMA initialized
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::assoc
Registered led device: b43-phy0::radio
b43-phy0 debug: Wireless interface started
b43-phy0 debug: Adding Interface type 2
b43-phy0: Radio turned on by software
ADDRCONF(NETDEV_UP): wlan0: link is not ready
cfg80211: Calling CRDA for country: RU
NET: Registered protocol family 17
wlan0: authenticate with AP 00:1e:73:3f:c4:0c
wlan0: authenticated
wlan0: associate with AP 00:1e:73:3f:c4:0c
wlan0: RX AssocResp from 00:1e:73:3f:c4:0c (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Clocksource tsc unstable (delta = -166934825 ns)
usbcore: registered new interface driver usblp
wlan0: no IPv6 routers present
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
b43-phy0 ERROR: PHY transmission error
|
