MRTG под Windows :: В помощь системному администратору

Всем привет. У меня проблема

Установил mrtg-2.16.4 и ActivePerl-5.12.2.1202-MSWin32-x86-293621 64битка.

Устанавливаю всё это на windows 7 x64 и IIS.

В C:\mrtg\bin\mrtg.cfg кидаю этот конфиг

http://forum.ru-board.com/topic.cgi?forum=8&topic=6107&start=0&limit=1&m=1#1

Запускаю и показывает ошибки. ((( Но вроде как появились графики, но через некоторое время в них ничего не изменяется.

c:\mrtg\bin>perl mrtg mrtg.cfg
Daemonizing MRTG ...
Do Not close this window. Or MRTG will die
2010-10-03 17:18:44: WARNING: Could not match host:'public@192.168.0.1:' ref:
'Ip' key:'192.168.0.1'
SNMP Error:
receiving response PDU: ╙фрыхээ√щ їюёЄ яЁшэєфшЄхы№эю ЁрчюЁтры ёє∙хёЄтє■∙хх яюфъы
■ўхэшх.
SNMPv1_Session (remote host: "192.168.0.1" [192.168.0.1].161)
community: "public"
request ID: 749750312
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492
SNMPGET Problem for 1.3.6.1.2.1.25.3.3.1.2.1 1.3.6.1.2.1.25.3.3.1.2.2 sysUptime
sysName on public@192.168.0.1::::::v4only
at mrtg line 2242
SNMP Error:
receiving response PDU: ╙фрыхээ√щ їюёЄ яЁшэєфшЄхы№эю ЁрчюЁтры ёє∙хёЄтє■∙хх яюфъы
■ўхэшх.
SNMPv1_Session (remote host: "192.168.0.1" [192.168.0.1].161)
community: "public"
request ID: 749750313
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492
SNMPGET Problem for 1.3.6.1.2.1.25.2.3.1.6.1 1.3.6.1.2.1.25.2.3.1.5.1 sysUptime
sysName on public@192.168.0.1::::::v4only
at mrtg line 2242
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.0.1" [192.168.0.1].161)
community: "puclic"
request ID: 1635552569
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492
SNMPGET Problem for 1.3.6.1.2.1.25.2.3.1.4.1 1.3.6.1.2.1.25.2.3.1.4.1 sysUptime
sysName on puclic@192.168.0.1::::::v4only
at mrtg line 2242
2010-10-03 17:18:44: WARNING: skipping because at least the query for 1.3.6.1.2.
1.25.2.3.1.4.1 on 192.168.0.1 did not succeed
2010-10-03 17:18:44: WARNING: no data for 1.3.6.1.2.1.25.2.3.1.4&1.3.6.1.2.1.25.
2.3.1.4:puclic@192.168.0.1. Skipping further queries for Host 192.168.0.1 in thi
s round.
SNMP Error:
receiving response PDU: ╙фрыхээ√щ їюёЄ яЁшэєфшЄхы№эю ЁрчюЁтры ёє∙хёЄтє■∙хх яюфъы
■ўхэшх.
SNMPv1_Session (remote host: "192.168.0.1" [192.168.0.1].161)
community: "puclic"
request ID: 1912774037
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492
SNMPGET Problem for 1.3.6.1.2.1.25.2.3.1.6.2 1.3.6.1.2.1.25.2.3.1.5.2 sysUptime
sysName on puclic@192.168.0.1::::::v4only
at mrtg line 2242
SNMP Error:
receiving response PDU: ╙фрыхээ√щ їюёЄ яЁшэєфшЄхы№эю ЁрчюЁтры ёє∙хёЄтє■∙хх яюфъы
■ўхэшх.
SNMPv1_Session (remote host: "192.168.0.1" [192.168.0.1].161)
community: "puclic"
request ID: 1912774038
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492
SNMPGET Problem for 1.3.6.1.2.1.25.2.3.1.4.4 1.3.6.1.2.1.25.2.3.1.4.4 sysUptime
sysName on puclic@192.168.0.1::::::v4only
at mrtg line 2242
SNMP Error:
receiving response PDU: ╙фрыхээ√щ їюёЄ яЁшэєфшЄхы№эю ЁрчюЁтры ёє∙хёЄтє■∙хх яюфъы
■ўхэшх.
SNMPv1_Session (remote host: "192.168.0.1" [192.168.0.1161)
community: "puclic"
request ID: 1912774039
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492
SNMPGET Problem for 1.3.6.1.4.1.311.1.7.3.1.13.0 1.3.6.1.4.1.311.1.7.3.1.13.0 sy
sUptime sysName on puclic@192.168.0.1::::::v4only
at mrtg line 2242
2010-10-03 17:18:54: ERROR: Target[int1_test][_IN_] ' $target->[0]{$mode} ' did
not eval into defined data
2010-10-03 17:18:54: ERROR: Target[int1_test][_OUT_] ' $target->[0]{$mode} ' did
not eval into defined data
2010-10-03 17:18:54: ERROR: Target[cpu1_2_test][_IN_] ' $target->[1]{$mode} ' di
d not eval into defined data
2010-10-03 17:18:54: ERROR: Target[cpu1_2_test][_OUT_] ' $target->[1]{$mode} ' d
id not eval into defined data
2010-10-03 17:18:54: ERROR: Target[hdd1_test][_IN_] ' $target->[2]{$mode} * $t
arget->[3]{$mode} ' (warn): Use of uninitialized value in multiplication (*) at
(eval 31) line 1.
2010-10-03 17:18:54: ERROR: Target[hdd1_test][_OUT_] ' $target->[2]{$mode} * $
target->[3]{$mode} ' (warn): Use of uninitialized value in multiplication (*) at
(eval 32) line 1.
2010-10-03 17:18:54: ERROR: Target[hdd2_test][_IN_] ' $target->[4]{$mode} * $t
arget->[5]{$mode} ' (warn): Use of uninitialized value in multiplication (*) at
(eval 33) line 1.
2010-10-03 17:18:54: ERROR: Target[hdd2_test][_OUT_] ' $target->[4]{$mode} * $
target->[5]{$mode} ' (warn): Use of uninitialized value in multiplication (*) at
(eval 34) line 1.
2010-10-03 17:18:54: ERROR: Target[mem_test][_IN_] ' $target->[6]{$mode} * $ta
rget->[7]{$mode} ' (warn): Use of uninitialized value in multiplication (*) at (
eval 35) line 1.
2010-10-03 17:18:54: ERROR: Target[mem_test][_OUT_] ' $target->[6]{$mode} * $t
arget->[7]{$mode} ' (warn): Use of uninitialized value in multiplication (*) at
(eval 36) line 1.
2010-10-03 17:18:54: ERROR: Target[users_test][_IN_] ' $target->[8]{$mode} ' did
not eval into defined data
2010-10-03 17:18:54: ERROR: Target[users_test][_OUT_] ' $target->[8]{$mode} ' di
d not eval into defined data

Помогите пожалуйста, хочу сделать у себя на компе мониторинг. Роутора нету.

Модерирует : lynx, Crash_Master, dg, emx, ShriEkeR
Версия для печати • Подписаться • Добавить в закладки