garik743
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору вот лог подключения и попытки прошивки. CFE version 1.0.37-0.6.7 for BCM96348 (32bit,SP,BE) Build Date: Thu Aug 3 17:34:35 CST 2006 (michaelc) Flash Config: CS0(1fc00009,15),Base(bfc00000),Size(4MB) Ethernet Network Device: External PHY bootflag 16 found@block 8 Board IP address : 192.168.1.1 Host IP address : 192.168.1.2 Gateway IP address : Run from flash/host (f/h) : f Default host run file name : Default host flash file name : bcmModelName_fs_kernel Boot delay (1-9 seconds) : 1 Board Id Name : RTA1025BW_16 Psi size in KB : 24 Number of MAC Addresses (1-32) : 4 Ethernet MAC Address : 00:1b:9e:67:dc:e2 Memory size in MB : 16 ==== Press space key to stop auto run (1 seconds) ==== Auto run second count down(before hit space key): 0 Code Address: 0x80010000, Entry Address: 0x8018f018 Decompression OK! Entry at 0x8018f018 Closing network. Starting program at 0x8018f018 Linux version 2.6.8.1 (compiled by michaelc) (gcc version 3.4.2) #1 Wed Dec 20 18:43:26 CST 2006 ec/22a2 System PLL( MPI clock 0x10) Flash Config: CS0(1fc00009,15),Base(bfc00000),Size(4MB) FLASH_BASE bfc00000,blk 0 Total Flash size: 4096K with 71 sectors NVRAM @0 block Scratch pad is not used for this flash part. CPU revision is: 00029107 Determined physical RAM map: memory: 00fa0000 @ 00000000 (usable) On node 0 totalpages: 4000 DMA zone: 4000 pages, LIFO batch:1 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: root=31:0 ro noinitrd brcm mips: enabling icache and dcache... Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes. Primary data cache 8kB 2-way, linesize 16 bytes. PID hash table entries: 64 (order 6: 512 bytes) Using 120.000 MHz high precision timer. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 14084k/16000k available (1322k kernel code, 1896k reserved, 205k data, 72k init, 0k highmem) Calibrating delay loop... 239.20 BogoMIPS Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Checking for 'wait' instruction... unavailable. NET: Registered protocol family 16 Can't analyze prologue code at 801592dc 1.parse options inodes 1763 block 1763 PPP generic driver version 2.4.2 NET: Registered protocol family 24 Using noop io scheduler bcm963xx_mtd driver v1.0 rootfs_addr 0bfc10100 No BinFs brcmboard: brcm_board_init entry bcm963xx_serial driver v2.0 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 512 bind 1024) NET: Registered protocol family 1 NET: Registered protocol family 17 Ebtables v2.0 registered NET: Registered protocol family 8 NET: Registered protocol family 20 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 72k freed init started: BusyBox v1.00 (2005) multi-call binary Algorithmics/MIPS FPU Emulator v1.5 tmpfs size 262144 1.parse options inodes 1772 block 64 BusyBox v1.00 (2005) Built-in shell (msh) Enter 'help' for a list of built-in commands. Loading drivers and kernel modules... atmapi: module license 'Proprietary' taints kernel. blaadd: blaa_detect entry adsl: adsl_init entry Broadcom BCMPROCFS v1.0 initialized External Switch Detected !! Broadcom BCM6348B0 Ethernet Network Device v0.3 Dec 20 2006 18:41:29 Config Ethernet Switch Through SPI Slave Select 0 eth0: MAC Address: 00:1B:9E:67:DC:E2 Broadcom BCM6348B0 USB Network Device v0.4 Dec 20 2006 18:41:32 usb0: MAC Address: 00 1B 9E 67 DC E3 usb0: Host MAC Address: 00 1B 9E 67 DC E4 USB Vendor id=069a, USB Product id=0316 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Enabling device 0000:00:01.0 (0004 -> 0006) wl: srom not detected, using main memory mapped srom info (wombo board) wl0: Broadcom BCM4318 802.11 Wireless Controller 3.91.41.0 pSdramPHY=0xA0FFFFF8, 0x3333DCCE 0xFFBDDEEF AdslCoreHwReset: AdslOemDataAddr = 0xA0FF8104 ==> Siemens ADSL SL2-141-I Software Version: 3.29u_B2pB021.d19b <== Setting country code "AU" pvc2684d: Interface "nas_1_32" created sucessfully pvc2684d: Communicating over ATM 0.1.32, encapsulation: LLC disable vlan vlan disable eth0 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (125 buckets, 0 max) - 368 bytes per conntrack ip_conntrack_pptp version 2.1 loaded ip_nat_pptp version 2.0 loaded ip_conntrack_h323: init ip_nat_h323: initialize the module! ip_conntrack_rtsp v0.01 loading ip_nat_rtsp v0.01 loading ip_nat_pptp version 2.0 unloaded ip_conntrack_pptp version 2.1 unloaded board_ioctl: boot complete! ******************************************************************************** ******************************************************************************** ******************************************************************************** ******************************************************************************** ******************************************************************************** ******************************************************************************* Total image size: 3890224 Checking Image tag..... User request image with tag 'RTA1025BW_16' flash into board ID 'RTA1025BW_16' bufSize=[3890224] tagVer=6 curVer=6 tagVerLast=26 FlashLayoutVer=0 curFlashLayoutVer=5 ***** Not allowed to downgrade to 2.10 or earlier version ****** Checking Image tag..... User request image with tag 'RTA1025BW_16' flash into board ID 'RTA1025BW_16' bufSize=[3890224] tagVer=6 curVer=6 tagVerLast=26 FlashLayoutVer=0 curFlashLayoutVer=5 ***** Not allowed to downgrade to 2.10 or earlier version ****** Tftp Image failed: Illegal image. CFE version 1.0.37-0.6.7 for BCM96348 (32bit,SP,BE) Build Date: Thu Aug 3 17:34:35 CST 2006 (michaelc) Flash Config: CS0(1fc00009,15),Base(bfc00000),Size(4MB) Ethernet Network Device: External PHY bootflag 16 found@block 8 Board IP address : 192.168.1.1 Host IP address : 192.168.1.2 Gateway IP address : Run from flash/host (f/h) : f Default host run file name : Default host flash file name : bcmModelName_fs_kernel Boot delay (1-9 seconds) : 1 Board Id Name : RTA1025BW_16 Psi size in KB : 24 Number of MAC Addresses (1-32) : 4 Ethernet MAC Address : 00:1b:9e:67:dc:e2 Memory size in MB : 16 ==== Press space key to stop auto run (1 seconds) ==== Auto run second count down(before hit space key): 0 Code Address: 0x80010000, Entry Address: 0x8018f018 Decompression OK! Entry at 0x8018f018 Closing network. Starting program at 0x8018f018 Linux version 2.6.8.1 (compiled by michaelc) (gcc version 3.4.2) #1 Wed Dec 20 1 8:43:26 CST 2006 ec/22a2 System PLL( MPI clock 0x10) Flash Config: CS0(1fc00009,15),Base(bfc00000),Size(4MB) FLASH_BASE bfc00000,blk 0 Total Flash size: 4096K with 71 sectors NVRAM @0 block Scratch pad is not used for this flash part. CPU revision is: 00029107 Determined physical RAM map: memory: 00fa0000 @ 00000000 (usable) On node 0 totalpages: 4000 DMA zone: 4000 pages, LIFO batch:1 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: root=31:0 ro noinitrd brcm mips: enabling icache and dcache... Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes. Primary data cache 8kB 2-way, linesize 16 bytes. PID hash table entries: 64 (order 6: 512 bytes) Using 120.000 MHz high precision timer. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 14084k/16000k available (1322k kernel code, 1896k reserved, 205k data, 7 2k init, 0k highmem) Calibrating delay loop... 239.20 BogoMIPS Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Checking for 'wait' instruction... unavailable. NET: Registered protocol family 16 Can't analyze prologue code at 801592dc 1.parse options inodes 1763 block 1763 PPP generic driver version 2.4.2 NET: Registered protocol family 24 Using noop io scheduler bcm963xx_mtd driver v1.0 rootfs_addr 0bfc10100 No BinFs brcmboard: brcm_board_init entry bcm963xx_serial driver v2.0 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 512 bind 1024) NET: Registered protocol family 1 NET: Registered protocol family 17 Ebtables v2.0 registered NET: Registered protocol family 8 NET: Registered protocol family 20 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 72k freed init started: BusyBox v1.00 (2005) multi-call binary Algorithmics/MIPS FPU Emulator v1.5 tmpfs size 262144 1.parse options inodes 1772 block 64 BusyBox v1.00 (2005) Built-in shell (msh) Enter 'help' for a list of built-in commands. Loading drivers and kernel modules... atmapi: module license 'Proprietary' taints kernel. blaadd: blaa_detect entry adsl: adsl_init entry Broadcom BCMPROCFS v1.0 initialized External Switch Detected !! Broadcom BCM6348B0 Ethernet Network Device v0.3 Dec 20 2006 18:41:29 Config Ethernet Switch Through SPI Slave Select 0 eth0: MAC Address: 00:1B:9E:67:DC:E2 Broadcom BCM6348B0 USB Network Device v0.4 Dec 20 2006 18:41:32 usb0: MAC Address: 00 1B 9E 67 DC E3 usb0: Host MAC Address: 00 1B 9E 67 DC E4 USB Vendor id=069a, USB Product id=0316 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Enabling device 0000:00:01.0 (0004 -> 0006) wl: srom not detected, using main memory mapped srom info (wombo board) wl0: Broadcom BCM4318 802.11 Wireless Controller 3.91.41.0 eth0 Link UP. pSdramPHY=0xA0FFFFF8, 0x25021 0xDEADBEEF AdslCoreHwReset: AdslOemDataAddr = 0xA0FF8104 ==> Siemens ADSL SL2-141-I Software Version: 3.29u_B2pB021.d19b <== Setting country code "AU" pvc2684d: Interface "nas_1_32" created sucessfully pvc2684d: Communicating over ATM 0.1.32, encapsulation: LLC disable vlan vlan disable eth0 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (125 buckets, 0 max) - 368 bytes per conntrack ip_conntrack_pptp version 2.1 loaded ip_nat_pptp version 2.0 loaded ip_conntrack_h323: init ip_nat_h323: initialize the module! ip_conntrack_rtsp v0.01 loading ip_nat_rtsp v0.01 loading ip_nat_pptp version 2.0 unloaded ip_conntrack_pptp version 2.1 unloaded board_ioctl: boot complete! |