Whitestar13
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору Вот и DD-WRT не встал... factory-to-ddwrt.bin (7В0000) TP-Link WR1043ND v1.1/v1.4 Firmware: Special image for initial flashing U-Boot 1.1.4 (Nov 30 2011 - 09:20:25) AP83 (ar9100) U-boot 0.0.11 DRAM: sri 32 MB id read 0x100000ff flash size 8MB, sector count = 128 Flash: 8 MB Using default environment In: serial Out: serial Err: serial Net: ag7100_enet_initialize... No valid address in Flash. Using fixed address : cfg1 0xf cfg2 0x7114 eth0: 00:03:7f:09:0b:ad eth0 up eth0 Autobooting in 1 secondsar7100> erase 0xbf020000+7b0000 Usage: erase - erase FLASH memory ar7100> tftpboot 0x81000000 7b0000.bin dup 1 speed 1000 Using eth0 device TFTP from server 192.168.0.5; our IP address is 192.168.0.2 Filename '7b0000.bin'. Load address: 0x81000000 Loading: ################################################################# ############################ ##################################### ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############### done Bytes transferred = 8060928 (7b0000 hex) ar7100> cp.b 0x81000000 0xbf020000 0x7b0000 Copy to Flash... write addr: bf020000 done ar7100> bootm 0xbf020000 ## Booting image at bf020000 ... Uncompressing Kernel Image ... Error: Bad gzipped data GUNZIP ERROR - must RESET board to recover |