nobana1
Full Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору Собрал новый конфиг, ВК 1650 поставил из старого компа 09.07-14.10.2024 ВК 1650 на драйвере 556.12 14.10.2024 замена 1650 на 4060 **** 25.12.2024 ребут 26.12.2024 Видеодрайвера 561.09 => 566.36 (подозрение на проблему в драйверах (ребуты) - советуют переустановить начисто) 03.01.2025 ребут 19.01.2025 ребут 21.01.2025 Заменил видеодрайвера 566.36 на 556.12 /те драйвера что стояли до замены ВК 1650 на 4060. Перед тем как происходит ребут начинаются тормоза мышки – в Хроме в Ютубе при перемещении курсора по превью видео на главной странице и через ~ мин гаснет экран и ребут. В игре World of Warships когда появляются фризы в порту спустя минуту происходит ребут. Это происходит как-то рандомно – не каждый раз при заходе в игру – Однажды зайдя в игру World of Warships обнаружил фризы – вышел, загрузил др игру – в меню фризов не было а при загрузки сэйва (продолжить игру) началась загрузка и … ребут. 1. (03.01.2025) A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: watchdog.sys If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information 1: *** STOP: 0x00000119 (0x0000000000000002, 0xffffffffc000000d, 0xffffaf8b5994f920, 0xffffdc05dc710590) *** watchdog.sys - Address 0xfffff80578d43ad0 base at 0xfffff80578d40000 DateStamp 0x28af795d 2. (19.01.2025) A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: watchdog.sys If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information 2: *** STOP: 0x00000119 (0x0000000000000002, 0xffffffffc000000d, 0xfffff98ab4b8f920, 0xffffa10aefd21910) *** watchdog.sys - Address 0xfffff80646e13ad0 base at 0xfffff80646e10000 DateStamp 0x28af795d //на этом конфиге стояла и работала ВК 1650 с середины июля 2024 по середину октября 2024 – без проблем, до это она работала на другой МП, с др процем и ОЗУ с середины декабря 2019 по середину июля 2024 – без проблем. Начались ребуты после установки в тек конфиг ВК 4060… FurMark не показал ни артефактов ни повышенных температур. ВК 4060 не разгонялась ни по ГП ни по памяти !!! 556.12 27.06.2024 Проверяю 560.70 16.07.2024 - 560.81 06.08.2024 - 560.94 20.08.2024 - 561.09 11.09.2024 Ребут 565.90 01.10.2024 - 566.03 22.10.2024 - 566.14 12.11.2024 - 566.36 05.12.2024 Ребут 572.16 30.01.2025 - 21.01.2025 Заменил видеодрайвера 566.36 на 556.12 /те драйвера что стояли до замены ВК 1650 на 4060. ТАКИЕ ДРАЙВЕРА КРИВЫЕ ИЛИ ПРОБЛЕМЫ С 4060й? (с 1650 не было проблем пока не сменил на 4060ю, но и драйвера были версии 556.12 - так и проработал на них до смены ВК) | Всего записей: 544 | Зарегистр. 27-11-2013 | Отправлено: 22:39 04-02-2025 | Исправлено: nobana1, 22:41 04-02-2025 |
|