Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
Версия Nero: 6.6.0.1 (Nero Express)
Рекордер: <LITE-ON LTR-52327S> Версия: QS04 - HA 0 TA 1 - 6.6.0.1
Драйвер адаптера: <nvidesm> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Версия: 2.2a - HA 1 TA 0 - 6.6.0.1
Драйвер адаптера: <a347scsi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A 3.06 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-52327S QS04 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON LTR-52327S E: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 83MB (85016kB)
Memory in use : 83 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.1.2005
Образ CD
21:31:44 #1 Text 0 File Burncd.cpp, Line 2832
LITE-ON LTR-52327S
Защита опустошения буфера активирован
21:31:44 #2 Text 0 File Reader.cpp, Line 127
Reader running
21:31:44 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON LTR-52327S running
21:31:44 #4 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using CD-R/RW media
21:31:44 #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 299537 ( 66:35.62)
21:31:44 #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
21:31:44 #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: LITE-ON LTR-52327S;
CDRW code: 00 97 27 29; OSJ entry from: Princo Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
21:31:44 #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:31:44 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 299538 (299538) = #299538/66:33.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 299538 blocks [LITE-ON LTR-52327S]
--------------------------------------------------------------
21:31:44 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [LITE-ON LTR-52327S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 613761024, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
299538 | lead-out | 1 | 0x00 | 0x41
21:31:45 #11 Phase 24 File dlgbrnst.cpp, Line 1853
Старт кэширования файлов
21:31:45 #12 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.
21:31:45 #13 Phase 25 File dlgbrnst.cpp, Line 1853
Кэширование файлов завершено
21:31:45 #14 Phase 36 File dlgbrnst.cpp, Line 1853
Старт прожига на 12x (1 800 Кб/с)
21:31:45 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
21:31:45 #16 Text 0 File Mmc.cpp, Line 16025
StartDAO : CD-Text - Off
21:31:45 #17 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
21:31:45 #18 Text 0 File Mmc.cpp, Line 16312
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 42 23 3f
21:31:57 #19 SCSI -500 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0A890000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
21:31:57 #20 CDR -500 File Writer.cpp, Line 311
Команда SCSI отменена
LITE-ON LTR-52327S\H0 T1
21:32:01 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
21:32:02 #22 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
21:32:02 #23 SCSI -1033 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x01
21:32:07 #24 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
21:32:07 #25 Phase 38 File dlgbrnst.cpp, Line 1853
Прожиг завершился неудачей на 12x (1 800 Кб/с)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28.10.2003 12:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\nvidesm.sys': Ver=5.10.2600.0307 built by: WinDDK, size=20224 bytes, created 13.11.2002 9:10:00 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30.04.2004 9:33:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) |
