Ivan_83
Junior Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору Как такое пофиксить? # smartctl -a /dev/ada0 smartctl 6.4 2015-06-04 r4109 [FreeBSD 10.2-STABLE amd64] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F4 EG (AF) Device Model: SAMSUNG HD204UI Serial Number: *********** LU WWN Device Id: 5 0024e9 203ef0f5d Firmware Version: 1AQ10001 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Aug 27 09:13:07 2015 MSK ==> WARNING: Using smartmontools or hdparm with this drive may result in data loss due to a firmware bug. ****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ****** Buggy and fixed firmware report same version number! See the following web pages for details: http://knowledge.seagate.com/articles/en_US/FAQ/223571en http://www.smartmontools.org/wiki/SamsungF4EGBadBlocks SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: CMD=0xb0 FR =0xda NS =0x00 SC =0x28 CL =0x00 CH =0x00 RETURN =0x0000 SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. No failed Attributes found. General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (19500) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 325) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 4 2 Throughput_Performance 0x0026 055 053 000 Old_age Always - 18018 3 Spin_Up_Time 0x0023 067 067 025 Pre-fail Always - 10034 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 178 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 39298 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 186 181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 5949394 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 643 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 194 Temperature_Celsius 0x0002 064 054 000 Old_age Always - 35 (Min/Max 7/46) 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 3 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 86 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 190 SMART Error Log Version: 1 ATA Error Count: 1 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 occurred at disk power-on lifetime: 5074 hours (211 days + 10 hours) When the command that caused the error occurred, the device was in a reserved state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 a8 80 33 35 e0 Error: ICRC, ABRT 168 sectors at LBA = 0x00353380 = 3486592 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 28 33 35 e0 00 00:54:17.813 READ DMA c8 00 00 28 32 35 e0 00 00:54:17.813 READ DMA c8 00 00 28 31 35 e0 00 00:54:17.813 READ DMA c8 00 00 28 30 35 e0 00 00:54:17.813 READ DMA c8 00 00 28 2f 35 e0 00 00:54:17.813 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 39298 - # 2 Short offline Completed without error 00% 39291 - # 3 Short offline Completed without error 00% 39267 - # 4 Short offline Completed without error 00% 39243 - # 5 Short offline Completed without error 00% 39219 - # 6 Extended offline Completed without error 00% 39202 - # 7 Short offline Completed without error 00% 39195 - # 8 Short offline Completed without error 00% 39171 - # 9 Short offline Completed without error 00% 39147 - #10 Short offline Completed without error 00% 39123 - #11 Short offline Completed without error 00% 39099 - #12 Short offline Completed without error 00% 39075 - #13 Short offline Completed without error 00% 39051 - #14 Extended offline Completed without error 00% 39033 - #15 Short offline Completed without error 00% 39027 - #16 Short offline Completed without error 00% 39003 - #17 Short offline Completed without error 00% 38979 - #18 Short offline Completed without error 00% 38955 - #19 Short offline Completed without error 00% 38931 - #20 Short offline Completed without error 00% 38907 - #21 Short offline Completed without error 00% 38883 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. | Всего записей: 53 | Зарегистр. 29-04-2005 | Отправлено: 09:18 27-08-2015 | Исправлено: Ivan_83, 09:19 27-08-2015 |
|