Ремонт накопителей Seagate. Часть 8 - [15] :: Магнитные носители информации

tametung
Надо еще на ревизию команды обращать внимание.
Без этого использование некоторых установок бессмысленно.
И получается что универсальной команды формата для всех F3 - нет.

Revision History:

0001.0000 Initial revision.
0001.000X Added ability to enable and display event-based output.
0011.000X Combined the PSG Diagnostic Error Codes (PSGDEC) and the Diagnostic External
Test Service Error Codes (DETSEC) into a single set of Diagnostic Error Codes
(DiagError).
0012.000X Added additional parameter 8 for users to input data pattern for format. The
default data pattern is 0x00000000 instead of the 0x77777777 for the User
Partition and 0xFFFFFFFF for the System Partition.
0012.001X Added option to process the Active Error Log.
0012.01XX Added brief event reporting (see bit 4 of the minor revision history below).
0012.02XX Added support for reporting the index of the defect list entry at which defect
list processing error occurred.
0012.03XX Added support for skipping track re-write operation on data sync time-out errors.
0012.04XX Added support for displaying error location for failing LBA ( wedge no and physical sector no )
0012.05XX Corrected output for iterative channels

Note on Minor Rev:
----.ZZXX ZZ represents the minor rev base value.
XX represents set of conditional feature supported by the command.
- If bit 0 of X is set, then the ability to enable and display
event-based output is supported.
- If bit 1 of X is set, then the ability to enable zone re-format
skipping and output command result information if at least one
zone re-format was skipped is supported.
- If bit 2 of X is set, then the ability to format only SeaCOS
Extended File (XF) space is supported.
- If bit 3 of X is set, then the ability to use secondary ER mode
to format/certify is supported.
- If bit 4 of X is set, then the command supports brief event
reporting.
- If bit 5 of X is set, then the command supports skipping of
track re-write operation on data sync time-out errors.

Модерирует : Akam1, Dr_StandBy, vertex4
Akam1 (29-01-2017 17:40): http://forum.ru-board.com/topic.cgi?forum=84&topic=5249	Версия для печати • Подписаться • Добавить в закладки
Страницы: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133