Axedem
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SandForce Genesis Utility v1.5.21.20110919-fc14-32bit SF_Core Library: v1.7.0.20110919-fc14-32bit Copyright 2010-2011, SandForce Inc., All Rights Reserved Worldwide. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Sat 10/15/2016 08:18:54] - SF_Genesis has been invoked with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ argv[1]: -PROCESS_SSD argv[2]: 1:0:0:0 argv[3]: /media/andrew/LIVE/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp argv[4]: /media/andrew/LIVE/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22214.0.driveconfig argv[5]: 12345 argv[6]: www_123 argv[7]: LOG=/media/andrew/LIVE/LOGII.log ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Sat 10/15/2016 08:18:54] - Instructing the operating system to purge any existing cached data for device: '1:0:0:0' [Sat 10/15/2016 08:19:31] - Issuing a discovery command for device: '1:0:0:0' [Sat 10/15/2016 08:19:37] - Discovery command completed... [Sat 10/15/2016 08:19:37] - Waiting 5 seconds for the system to settle... [Sat 10/15/2016 08:19:42] - Device designation string '1:0:0:0' is mapped to node '/dev/sg0' [Sat 10/15/2016 08:19:42] - Proceeding to process SSD device with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DeviceName = /dev/sg0 MFP Package Filename = /media/andrew/LIVE/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp Configuration File = /media/andrew/LIVE/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22214.0.driveconfig Serial No. = 12345 World Wide Name = www_123 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Sat 10/15/2016 08:20:09] - FATAL_ERROR: Could not get the IDENTIFY data from the drive... (0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Extended Error data: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ATA COMMAND : 0x00EC (236) ATA FEATURE : 0x0000 (0) Device Status: 0x0001 (1) Driver Status: 0x0000 (0) Host Status: 0x0008 (8) ~~~~~~~~~~~~~~ Sense Data: ~~~~~~~~~~~~~~ 0 - No Sense: 112 (0x70) FAIL 1 - Recovered Error: 0 (0x00) OK 2 - Not Ready: 5 (0x05) FAIL 3 - Medium Error: 0 (0x00) OK 4 - Hardware Error: 0 (0x00) OK 5 - Illegal Request: 0 (0x00) OK 6 - Unit Attention: 0 (0x00) OK 7 - Data Protect: 10 (0x0A) FAIL 8 - Blank Check: 0 (0x00) FAIL 9 - Vendor Specific: 64 (0x40) FAIL 10 - Copy Aborted: 0 (0x00) OK 11 - Aborted Command: 0 (0x00) OK 12 - Equal Comparison: 33 (0x21) NA 13 - Volume Overflow: 4 (0x04) NA 14 - Miscompare: 0 (0x00) OK 15 - Reserved: 0 (0x00) NA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ System Trace: ~~~~~~~~~~~~~~~~ [ 181.316448] ata2: nv: skipping hardreset on occupied port [ 181.792353] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 181.797202] ata2.00: configured for UDMA/100 [ 181.797212] ata2.00: device reported invalid CHS sector 0 [ 181.797239] ata2: EH complete [ 181.797262] sd 1:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 181.797270] sd 1:0:0:0: [sda] Sense Key : Illegal Request [current] [ 181.797276] sd 1:0:0:0: [sda] Add. Sense: Unaligned write command [ 181.816435] ata2.00: disabled [ 186.839487] ata2: hard resetting link [ 187.712065] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 187.712283] ata2.00: ATA-8: SandForce{200026BB}, 20DABBR0, max UDMA/133 [ 187.712289] ata2.00: 64 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 187.716905] ata2.00: configured for UDMA/133 [ 187.716922] ata2: EH complete [ 187.717210] scsi 1:0:0:0: Direct-Access ATA SandForce{200026 BBR0 PQ: 0 ANSI: 5 [ 187.752596] sd 1:0:0:0: [sda] 64 512-byte logical blocks: (32.8 kB/32.0 KiB) [ 187.752602] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 187.752694] sd 1:0:0:0: [sda] Write Protect is off [ 187.752699] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 187.752740] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 187.753263] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 187.759664] sd 1:0:0:0: [sda] Attached SCSI disk [ 218.179060] ata2: drained 512 bytes to clear DRQ [ 218.179073] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 218.179085] ata2.00: failed command: IDENTIFY DEVICE [ 218.179100] ata2.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 218.179109] ata2.00: status: { DRDY } [ 218.179119] ata2: hard resetting link [ 218.179122] ata2: nv: skipping hardreset on occupied port [ 218.650882] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 218.655718] ata2.00: configured for UDMA/133 [ 218.655758] ata2: EH complete [ 224.066901] ata2: drained 512 bytes to clear DRQ [ 224.066913] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 224.066924] ata2.00: failed command: IDENTIFY DEVICE [ 224.066938] ata2.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 224.066946] ata2.00: status: { DRDY } [ 224.066955] ata2: hard resetting link [ 224.066958] ata2: nv: skipping hardreset on occupied port [ 224.538737] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 224.543604] ata2.00: configured for UDMA/133 [ 224.543646] ata2: EH complete ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Sat 10/15/2016 08:20:09] - End of Genesis manufacturing log. [Sat 10/15/2016 08:20:09] - Exiting... [Sat 10/15/2016 08:20:09] - Overall Result for Device: /dev/sg0 ****** FAIL ****** | Всего записей: 2 | Зарегистр. 14-10-2016 | Отправлено: 07:56 15-10-2016 | Исправлено: Axedem, 08:35 15-10-2016 |
|