FLEHA
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору Не определяется совсем. Но если поставить перемычку, то в диспетчере видно как SandForce{200026BB}. Пробовал с перемычкой в линуксе посмотреть, вот что выдаёт. /dev/sda: ATA device, with non-removable media Model Number: SandForce{200026BB} Serial Number: 1 Firmware Revision: 20DABBR0 Transport: Serial; Revision: 0x0002 Standards: Used: unknown (minor revision code 0x0029) Supported: 8 7 6 5 Likely used: 8 Configuration: Logical max current cylinders 0 0 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 0 LBA user addressable sectors: 64 LBA48 user addressable sectors: 64 Logical Sector size: 512 bytes Physical Sector size: 4096 bytes Logical Sector-0 offset: 0 bytes device size with M = 1024*1024: 0 MBytes device size with M = 1000*1000: 0 MBytes cache/buffer size = unknown Nominal Media Rotation Rate: Solid State Device Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * Power Management feature set * Write cache Look-ahead * WRITE_BUFFER command * READ_BUFFER command * DOWNLOAD_MICROCODE SET_MAX security extension * 48-bit Address feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * General Purpose Logging feature set * 64-bit World wide name * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management DMA Setup Auto-Activate optimization * Software settings preservation Logical Unit WWN Device Identifier: 500232d000000001 NAA : 5 IEEE OUI : 00232d Unique ID : 000000001 Checksum: correct |