Ремонт SSD накопителей на контроллерах SandForce - [18] :: Магнитные носители информации

Спасибо gnn1953 за выгруженные файлы !

Удалось восстановить silicon power v55 60Gb (конфига 31002, чип sf-2241vb04), убитый по причине кривизны самих силиконовцев, выложивших битую прошивку 6.0.0
Из глюков - температура всегда равна 128 градусов, тип датчика задается в *.driveconfig, оригинала этого файла у меня нет и где искать не представляю.
Есть подозрение что неправильно настроена работа с power management, в логе есть запись:
[Wed 11/04/2015 08:00:25] - Warning: Unable to query diagnostics information to perform power management settings check
[Wed 11/04/2015 08:00:25] - B01 Power Management configuration request detected
хотя есть и режим "B02 Power Management" если привод отзывается версией железа 0x400026BB, у меня отзывается 0x200026BB

лог на COM порту:

Код:

[ROM] PORRST
[ROM] Rev: 402 CID: 200026BB BID: 625280
[ROM] Force Download: waiting for Download Microcode Command...
[ROM] Waiting for Link to come up...
[ROM] Link is UP.

после заливки производственнной прошивки:

Код:

<MFB> FlashQuadCtrlVerifyFlash: Lane 0 CE 0 Bus 0
<MFB> FlashQuadCtrlVerifyFlash: Lane 1 CE 0 Bus 0
<MFB> FlashQuadCtrlVerifyFlash: Lane 2 CE 0 Bus 0
<MFB> FlashQuadCtrlVerifyFlash: Lane 3 CE 0 Bus 0
<MFB> ********************************
<MFB> ***** Basic FLASH tests OK *****
<MFB> ********************************
<MFB> ---> Sector size 0 bytes L-Page size 4096 bytes <---
Security: Disabled H/w Decode enabled
<MFB>
*** MFB 582 Jul 3 2014 04:04:40 B:FW_PPRO_5_6_1_20140326_836378:FW_PPRO_5_8_2_Release-906190
*** Build Options : cfg/cfg_MLC_MIC_128Gb_MT29F128G08CBCAB_1Q_1C_1D -noenterprise -asic -subdir SF-2281_Board -pdump -elog -ecli -release -ecliLevel0 -div2 -sysclk300 -nochipsocket -mfb -noecli -suffix PP_R02214_s512 ANYHOST
*** Chip RevId from HW: B03 (ID=625280), FW Targeted For: B02 ASIC ***
*** SysClk : 300 MHz
*** Packer : 500 MHz
*** Flash : 830 MHz
*** FlaDiv : 2
*** GP1011 : 0 (0=Async ONFI, 1=Toggle, 2=ONFI, 3=Async Toggle)
<MFB>
*** GPIO0 : 1
<MFB> Scap charge wait
<MFB> Scap charge done
<MFB User> libSfStartC enter cfg:3fff4d68
<MFB> RootFileOpen(): not allowed yet [fid:8, mode:00000001, flags:00000003].
<MFB User> UserMain: CheckRetiredBlkCntAtClearSmart failed.
<MFB> PIO Flash Rblock Test on 0 - bus:1 ce:1 die:1 lane:4 pageCnt:1 correctPwr:304 seed:dead5f80 markers:4000
<MFB> Special Bad Block Scan: Valid 0 NumBytes 959 numOnes 1
<MFB> Read Device ID: 2C 84 64 3C A5 00
<MFB> == Format mode ONE align 0 ==
<MFB> ---> Sector size 0 bytes L-Page size 4096 bytes <---
<MFB> Flash ID Check
<MFB> Creating New Root
<MFB> Bad Block Discovery ...
<MFB> Number of Bad Blocks for SE/plane/lane
<MFB> SE pl: ln0 ln1 ln2 ln3
<MFB> 0 0: 0 0 0 0
<MFB> 0 1: 0 0 0 0
<MFB> Total Bad Block number is: 0 out of 8192
<MFB> Enabling Remap Unit...
<MFB> Erasing All Virgin Blocks...
<MFB> No Host GDL!
<MFB> Creating the Root Record ...
<MFB> Input PE: 0
<MFB> Drive RDD:100000 RDD Low:100000, PE: 3000 Options:0000 Warranty: 0
<MFB> Format: WP Circuit Not Present (dynamic)
<MFB> CreateAndVerifyRoot: fid=2 ibidx=6 buf=3fff0f3c buflen=3876
<MFB> CreateAndVerifyRoot: fid=2 ibidx=7 buf=3fff0f3c buflen=3876
<MFB> CreateAndVerifyRoot: fid=1 ibidx=2 buf=3fff0f24 buflen=24
<MFB> CreateAndVerifyRoot: fid=1 ibidx=3 buf=3fff0f24 buflen=24
<MFB> CreateAndVerifyRoot: fid=1 ibidx=4 buf=3fff0f24 buflen=24
<MFB> CreateAndVerifyRoot: fid=1 ibidx=5 buf=3fff0f24 buflen=24
<MFB> CreateAndVerifyRoot: fid=0 ibidx=0 buf=3fff1fbc buflen=3876
<MFB> CreateAndVerifyRoot: fid=0 ibidx=1 buf=3fff1fbc buflen=3876
<MFB> Initialize the Root ...
<MFB> PPRO-15147 (LION-1540): Retired Root IBlocks=0.

Found a valid Config Record.

Bus Width [bits] = 32
Number of CE = 1
Number of Die / CE = 1
CE CFG (Bus Mode) = 1-DIMM
Number of Bus = 1
Flash Page Size = 16384
Flash Page / Block = 512
Number of Block / Die = 2048
E-Page Size = 512
ECC Bytes = 32
ECC Correction Power = 19

<MFB> Low PE Flashware File Feature : NO
<MFB> Coalesce Compression Feature : YES
<MFB> Single Plane Remap Feature : YES
<MFB> RootInit: WP Circuit Not Present (dynamic)
<MFB> EVT LOG. Panic Dump slot 0 epa 0x00100002
<MFB> EVT LOG. Panic Dump slot 1 epa 0x00120002
<MFB> EVT LOG. Panic Dump slot 2 epa 0x00140002
<MFB> EVT LOG. Panic Dump slot 3 epa 0x00160002
<MFB> ------> Root Record Versions: CONFIG=1, PRR=1 (ib=3,pp=1), SRR=1 (ib=7,pp=1) <------
<MFB> UE: epa=00180000 laneMask=0xF bufId=97 ffBytes=9248 numEpages=17
<MFB> Saving Bad Block List ...
<MFB> UE: epa=001A0000 laneMask=0xF bufId=98 ffBytes=9248 numEpages=17
<MFB> UE: epa=001C0000 laneMask=0xF bufId=99 ffBytes=9248 numEpages=17
<MFB> Saving Grown Defect List ...
<MFB> UE: epa=001E0000 laneMask=0xF bufId=100 ffBytes=9248 numEpages=17
<MFB> Initializing SMART root file ...
<MFB> UE: epa=00200000 laneMask=0xF bufId=101 ffBytes=9248 numEpages=17
<MFB> UE: epa=00220000 laneMask=0xF bufId=102 ffBytes=9248 numEpages=17
<MFB> InitSmartLogRootFile is done
<MFB> Initializing XTS Global Keys ...
<MFB> UE: epa=00240000 laneMask=0xF bufId=103 ffBytes=9248 numEpages=17
<MFB> Initializing Life Table ...
<MFB> Saving Life Table ...
<MFB> UE: epa=00260000 laneMask=0xF bufId=104 ffBytes=9248 numEpages=17
<MFB> Set LBA Offset to 0 ...
<MFB> Clearing the Map Table ...
<MFB> Clearing the SIN Table ...
<MFB> Saving the MAP Table1 ...
<MFB> UE: epa=00280000 laneMask=0xF bufId=105 ffBytes=9248 numEpages=17
<MFB> Saving the MAP Table2 ...
<MFB> UE: epa=002A0000 laneMask=0xF bufId=106 ffBytes=9248 numEpages=17
<MFB> Saving the SIN Table ...
<MFB> UE: epa=002C0000 laneMask=0xF bufId=107 ffBytes=9248 numEpages=17
<MFB> Saving the Remap Table ...
<MFB> UE: epa=002E0000 laneMask=0xF bufId=108 ffBytes=9248 numEpages=17
<MFB> UE: epa=00300000 laneMask=0xF bufId=109 ffBytes=9248 numEpages=17
<MFB> UE: epa=00320000 laneMask=0xF bufId=110 ffBytes=9248 numEpages=17
<MFB> Verifying the Remap Table ...
<MFB> Saving the RD Table ...
<MFB> UE: epa=00340000 laneMask=0xF bufId=138 ffBytes=9248 numEpages=17
<MFB> Saving the ID Data ...
<MFB> UE: epa=00360000 laneMask=0xF bufId=139 ffBytes=9248 numEpages=17
<MFB> Saving the Free Table ...
<MFB> UE: epa=00380000 laneMask=0xF bufId=141 ffBytes=9248 numEpages=17
<MFB> Finalizing the ROOT ...
<MFB> UE: epa=003A0000 laneMask=0xF bufId=142 ffBytes=9248 numEpages=17
<MFB> Factory Setup finished; you may reboot or download Flashware now.
<MFB> UE: epa=003C0000 laneMask=0xF bufId=143 ffBytes=9248 numEpages=17
<MFB> UE: epa=003E0000 laneMask=0xF bufId=153 ffBytes=9248 numEpages=17
<MFB User> SCT_CONFIG_DRIVE_UNIQUE: user space synced
<MFB> Firmware Fuse=0xFD00FD00, computed value=0xFD00
<MFB> PPRO_STAMP FROM IMAGE: 06 00 00 fd 00 00 00 00
<MFB> STAMP OK at offset 0x000000
<MFB> RSA OK

заливка основной прошивки:

Код:

<MFB> UE: epa=00400000 laneMask=0xF bufId=157 ffBytes=9248 numEpages=17
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=3 iba=64 pgpln=9 to 511
<MFB> Need 534592 More!
<MFB> SATA_UPDATE_IN_PROGRESS
<MFB> UE: epa=00420000 laneMask=0xF bufId=159 ffBytes=9248 numEpages=17
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=5 iba=66 pgpln=9 to 511
<MFB> UE: epa=00440000 laneMask=0xF bufId=160 ffBytes=9248 numEpages=17
<MFB> Need 469056 More!
<MFB> SATA_UPDATE_IN_PROGRESS
<MFB> UE: epa=00460000 laneMask=0xF bufId=179 ffBytes=9248 numEpages=17
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=3 iba=70 pgpln=10 to 511
<MFB> UE: epa=00480000 laneMask=0xF bufId=180 ffBytes=9248 numEpages=17
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=5 iba=72 pgpln=26 to 511
<MFB> Need 403520 More!
<MFB> SATA_UPDATE_IN_PROGRESS
<MFB> UE: epa=004A0000 laneMask=0xF bufId=208 ffBytes=9248 numEpages=17
<MFB> UE: epa=004C0000 laneMask=0xF bufId=209 ffBytes=9248 numEpages=17
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=3 iba=76 pgpln=34 to 511
<MFB> Need 337984 More!
<MFB> SATA_UPDATE_IN_PROGRESS
<MFB> UE: epa=004E0000 laneMask=0xF bufId=245 ffBytes=9248 numEpages=17
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=5 iba=78 pgpln=10 to 511
<MFB> UE: epa=001C0000 laneMask=0xF bufId=246 ffBytes=9248 numEpages=17
<MFB> Need 272448 More!
<MFB> SATA_UPDATE_IN_PROGRESS
<MFB> UE: epa=002E0000 laneMask=0xF bufId=35 ffBytes=9248 numEpages=17
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=3 iba=46 pgpln=9 to 511
<MFB> UE: epa=00360000 laneMask=0xF bufId=36 ffBytes=9248 numEpages=17
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=5 iba=54 pgpln=51 to 511
<MFB> Need 206912 More!
<MFB> SATA_UPDATE_IN_PROGRESS
<MFB> UE: epa=00400000 laneMask=0xF bufId=89 ffBytes=9248 numEpages=17
<MFB> UE: epa=00420000 laneMask=0xF bufId=90 ffBytes=9248 numEpages=17
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=3 iba=66 pgpln=60 to 511
<MFB> Need 141376 More!
<MFB> SATA_UPDATE_IN_PROGRESS
<MFB> UE: epa=00440000 laneMask=0xF bufId=152 ffBytes=9248 numEpages=17
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=5 iba=68 pgpln=9 to 511
<MFB> UE: epa=00460000 laneMask=0xF bufId=153 ffBytes=9248 numEpages=17
<MFB> Need 75840 More!
<MFB> SATA_UPDATE_IN_PROGRESS
<MFB> UE: epa=00480000 laneMask=0xF bufId=223 ffBytes=9248 numEpages=17
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=3 iba=72 pgpln=10 to 511
<MFB> UE: epa=004A0000 laneMask=0xF bufId=224 ffBytes=9248 numEpages=17
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=5 iba=74 pgpln=77 to 511
<MFB> Need 10304 More!
<MFB> SATA_UPDATE_IN_PROGRESS
<MFB> UE: epa=004C0000 laneMask=0xF bufId=47 ffBytes=9248 numEpages=17
<MFB> Validate SHA on Input Stream Microcode: PASS!
<MFB> Did not find appendix signature.
<MFB> Info 1: not a valid appendix.
<MFB> UE: epa=004E0000 laneMask=0xF bufId=48 ffBytes=9248 numEpages=17
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=3 iba=78 pgpln=78 to 511
<MFB> Validate SHA on Root File 3: PASS!
<MFB> UE: epa=001C0000 laneMask=0xF bufId=205 ffBytes=9248 numEpages=17
<MFB> ILL Dup SRC=4(IBIDX ff,IBA 2ba37) to DST=5 (IBIDX a,IBA 1c)!!!
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=5 iba=28 pgpln=0 to 511
<MFB> UE: epa=002E0000 laneMask=0xF bufId=206 ffBytes=9248 numEpages=17
<MFB> ILL Dup SRC=3(IBIDX 23,IBA 4e) to DST=4 (IBIDX 13,IBA 2e)!!!
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=4 iba=46 pgpln=78 to 511
<MFB> UE: epa=00360000 laneMask=0xF bufId=29 ffBytes=9248 numEpages=17
<MFB> ILL Dup SRC=3(IBIDX 23,IBA 4e) to DST=6 (IBIDX 17,IBA 36)!!!
<MFB> <<<Read-Only Root Files Padding>>> Padding fid=6 iba=54 pgpln=78 to 511
<MFB> Validate SHA on Root File 4: PASS!
<MFB> Download Microcode PASS!
<MFB> SATA_UPDATE_COMPLETE
<MFB> Warm Start (state=14) - Resetting ALL hardware blocks!

перезагрузка:

Код:

[ROM] Rev: 402 CID: 200026BB BID: 625280
[ROM] Try BCH[1]: CP=33 EC=54 EP=485
[ROM] Try BCH[2]: CP=29 EC=48 EP=485
[ROM] Try BCH[3]: CP=36 EC=59 EP=485
[ROM] Try BCH[4]: CP=39 EC=64 EP=485
[ROM] Load CRP
[CRP] Switching to Sync...
[ROM] Load FWR

Джентельмены подскажите, пробовал заливать несколько подходящих под мой SSD конфигов, но вот беда в конце каждой процедуры одна и таже ошибка, вот лог последней заливки:

Код:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Overall Summary:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Start Time: Tue, 11/03/2015 @ 00:51:42
End Time: Tue, 11/03/2015 @ 00:52:20
OverallResult: FAIL
ExitCode: (0x10090008:SF_GENESIS_FORMAT_ERROR)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Environment Settings:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Input Parameters:
argv[1]: -PROCESS_SSD
argv[2]: 3:0:0:0
argv[3]: /home/sla/OUT/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
argv[4]: /home/sla/OUT/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27902.0.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/home/sla/OUT/FW_PPRO_5_8_2_Release.906190.release--0/fw.log

Log File: SF_Genesis_Main_Log__Tue_11.03.2015_00.51.42.log
Hostname: localhost.localdomain
Host IP Address: 127.0.0.1
Port Number: 3
DeviceName: /dev/sg3
SF_Genesis Version: v1.7.0.01020130612-fc14-32bit
SF_Core Library Version: v1.7.1.20130612-fc14-32bit
SF_OS_Information: Linux 2.6.35.11-83.fc14.i686.PAE #1 SMP Mon Feb 7 06:57:55 UTC 2011 i686

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post Processing Device Information:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WWN OUI: UNKNOWN
WWN UniqueID: UNKNOWN
Serial No.: UNKNOWN
Model No.: UNKNOWN
Firmware Revision: UNKNOWN
ROM Revision: UNKNOWN
NAND Page Size: UNKNOWN
Number Of Chip Enable: UNKNOWN
Logical Sectors: UNKNOWN
NAND ID: UNKNOWN
Flash Manufacturer: UNKNOWN
Flash Device: UNKNOWN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit

Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 11/03/2015 00:51:42] - SF_Genesis has been invoked with the following parameters:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 3:0:0:0
argv[3]: /home/sla/OUT/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
argv[4]: /home/sla/OUT/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27902.0.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/home/sla/OUT/FW_PPRO_5_8_2_Release.906190.release--0/fw.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Tue 11/03/2015 00:51:42] - Instructing the operating system to purge any existing cached data for device: '3:0:0:0'
[Tue 11/03/2015 00:51:47] - Issuing a discovery command for device: '3:0:0:0'
[Tue 11/03/2015 00:51:53] - Discovery command completed...
[Tue 11/03/2015 00:51:53] - Waiting 5 seconds for the system to settle...
[Tue 11/03/2015 00:51:58] - Device designation string '3:0:0:0' is mapped to node '/dev/sg3'
[Tue 11/03/2015 00:51:58] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg3
MFP Package Filename = /home/sla/OUT/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
Configuration File = /home/sla/OUT/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27902.0.driveconfig
Serial No. = 12345
World Wide Name = www_123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Tue 11/03/2015 00:51:58] - Successfully received the IDENTIFY data from the drive...
[Tue 11/03/2015 00:51:58] - Validating Manufacturing Firmware Package: /home/sla/OUT/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Tue 11/03/2015 00:51:58] - Successfully opened the package: /home/sla/OUT/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Tue 11/03/2015 00:51:58] - file /home/sla/OUT/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27902.0.driveconfig Loaded successfully
[Tue 11/03/2015 00:51:58] - Warning: Unable to query diagnostics information to perform power management settings check
[Tue 11/03/2015 00:51:58] - B01 Power Management configuration request detected
[Tue 11/03/2015 00:51:58] - Successfully extracted *.DriveConfig file: /home/sla/OUT/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27902.0.driveconfig
[Tue 11/03/2015 00:51:58] - Extracted Config_ID: 1 (27902) in DriveConfig file: /home/sla/OUT/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27902.0.driveconfig
[Tue 11/03/2015 00:51:58] - Extracted SerialOutputControl: 0
[Tue 11/03/2015 00:51:58] - Searching for flashware image for configuration 27902
[Tue 11/03/2015 00:51:58] - Manifest found for configuration 27902
[Tue 11/03/2015 00:51:58] - Flashware image extracted: 27902_fw_cl_mlc_Toshiba_B02_64Gb_TC58TEG6DDJTA00_2Q_1C_1D_PP_R02098_s512.vic
[Tue 11/03/2015 00:51:58] - Searching for manufacturing image for configuration 27902
[Tue 11/03/2015 00:51:58] - Manifest found for configuration 27902
[Tue 11/03/2015 00:51:58] - Manufacturing image extracted: 27902_mf_mlc_Toshiba_B02_64Gb_TC58TEG6DDJTA00_2Q_1C_1D_PP_R02098_s512.vic
[Tue 11/03/2015 00:51:58] - Proceeding in ROM mode, download feature 3...
[Tue 11/03/2015 00:51:58] - Successfully downloaded MFB to the drive...
[Tue 11/03/2015 00:51:58] - Waiting (5 sec) for the drive to settle...
[Tue 11/03/2015 00:52:03] - Successfully received the IDENTIFY data from the drive...
[Tue 11/03/2015 00:52:03] - Firmware revision reported to be: '582ABBM0'. This indicates MFB download was successful.
[Tue 11/03/2015 00:52:03] - Successfully enabled SMART capabilities...
[Tue 11/03/2015 00:52:05] - Successfully issued a diagnostic unlock...
[Tue 11/03/2015 00:52:06] - Performing the flash test of block 0 (0x0000)...
[Tue 11/03/2015 00:52:09] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 2
Chip Enabled Count: 1
Die Count: 1
Lane Count: 4
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------

+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0003 | N1,N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 3 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 3 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+

-----------------------------------------------------------------------------
Total Number of test results: 8
Number of failures: 0
Number of Passed with warnings: 1
No. Passed without warnings: 7
-----------------------------------------------------------------------------

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Tue 11/03/2015 00:52:09] - Performing the FORMAT Command with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MemoryWearCycleCapability = 0
CurrentPE_CycleCount = 0
LifeInSeconds = 0
LogicalCapacity = 117231408
SectorSize = 512
SectorAlignmentOffset = 0
ExpectedMemoryID = 56984 (0xDE98)
ExpectedNumDies = 0
SerialOutputControl = 0
Time[8] = 0x0000000000000000
MiscFlag_Erase_R_Block = 0
MiscFlag_PanicHandlingEnabled = 0
MiscFlag_PanicOnSATA_Error = 0
MiscFlag_WriteThrottlingTestMode = 0
MiscFlag_DisableUserBandECCX = 1
L_PageSize = 0
E_PageSize = 0
ErrorCorrectionPower = 0
ConfigDeviceReadDisturbCount = 0
ConfigDeviceReadDisturbCountLow = 0
ExtraOptions_0_1 = 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Tue 11/03/2015 00:52:20] - FATAL_ERROR: Could not perform the FORMAT() operation on the drive... (0x0000C048:SF_SCT (C048h): Root Creation Failed (MFB format))
[Tue 11/03/2015 00:52:20] - End of Genesis manufacturing log.
[Tue 11/03/2015 00:52:20] - Exiting...

Модерирует : Akam1, Dr_StandBy, vertex4
Akam1 (23-12-2016 01:32): http://forum.ru-board.com/topic.cgi?forum=84&topic=5239	Версия для печати • Подписаться • Добавить в закладки
Страницы: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106