Djonibad
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Overall Summary: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Start Time: Wed, 12/16/2015 @ 04:17:08 End Time: Wed, 12/16/2015 @ 04:18:11 OverallResult: FAIL ExitCode: (0x10090008:SF_GENESIS_FORMAT_ERROR) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Environment Settings: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Input Parameters: argv[1]: -PROCESS_SSD argv[2]: 5:0:0:0 argv[3]: /home/djon/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp argv[4]: /home/djon/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22339.0.driveconfig argv[5]: 2345 argv[6]: www_123 argv[7]: log=/home/djon/fw.log Log File: SF_Genesis_Main_Log__Wed_12.16.2015_04.17.08.log Hostname: djon Host IP Address: 192.168.1.35 Port Number: 2 DeviceName: /dev/sg2 SF_Genesis Version: v1.7.0.01020130612-fc14-32bit SF_Core Library Version: v1.7.1.20130612-fc14-32bit SF_OS_Information: Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Post Processing Device Information: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ WWN OUI: UNKNOWN WWN UniqueID: UNKNOWN Serial No.: UNKNOWN Model No.: UNKNOWN Firmware Revision: UNKNOWN ROM Revision: UNKNOWN NAND Page Size: UNKNOWN Number Of Chip Enable: UNKNOWN Logical Sectors: UNKNOWN NAND ID: UNKNOWN Flash Manufacturer: UNKNOWN Flash Device: UNKNOWN ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit SF_Core Library: v1.7.1.20130612-fc14-32bit Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 12/16/2015 04:17:08] - SF_Genesis has been invoked with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ argv[1]: -PROCESS_SSD argv[2]: 5:0:0:0 argv[3]: /home/djon/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp argv[4]: /home/djon/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22339.0.driveconfig argv[5]: 2345 argv[6]: www_123 argv[7]: log=/home/djon/fw.log ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 12/16/2015 04:17:08] - Instructing the operating system to purge any existing cached data for device: '5:0:0:0' [Wed 12/16/2015 04:17:13] - Issuing a discovery command for device: '5:0:0:0' [Wed 12/16/2015 04:17:18] - Discovery command completed... [Wed 12/16/2015 04:17:18] - Waiting 5 seconds for the system to settle... [Wed 12/16/2015 04:17:23] - Device designation string '5:0:0:0' is mapped to node '/dev/sg2' [Wed 12/16/2015 04:17:23] - Proceeding to process SSD device with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DeviceName = /dev/sg2 MFP Package Filename = /home/djon/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp Configuration File = /home/djon/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22339.0.driveconfig Serial No. = 2345 World Wide Name = www_123 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 12/16/2015 04:17:23] - Successfully received the IDENTIFY data from the drive... [Wed 12/16/2015 04:17:23] - Validating Manufacturing Firmware Package: /home/djon/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp [Wed 12/16/2015 04:17:26] - Successfully opened the package: /home/djon/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp [Wed 12/16/2015 04:17:26] - file /home/djon/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22339.0.driveconfig Loaded successfully [Wed 12/16/2015 04:17:26] - Warning: Unable to query diagnostics information to perform power management settings check [Wed 12/16/2015 04:17:26] - B01 Power Management configuration request detected [Wed 12/16/2015 04:17:26] - Successfully extracted *.DriveConfig file: /home/djon/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22339.0.driveconfig [Wed 12/16/2015 04:17:26] - Extracted Config_ID: 1 (22339) in DriveConfig file: /home/djon/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22339.0.driveconfig [Wed 12/16/2015 04:17:26] - Extracted SerialOutputControl: 0 [Wed 12/16/2015 04:17:26] - Searching for flashware image for configuration 22339 [Wed 12/16/2015 04:17:26] - Manifest found for configuration 22339 [Wed 12/16/2015 04:17:26] - Flashware image extracted: 22339_fw_cl_mlc_Toshiba_64Gb_TC58NVG6D2HTA00_2Q_2C_1D_S_PP_R01111_s512.vic [Wed 12/16/2015 04:17:26] - Searching for manufacturing image for configuration 22339 [Wed 12/16/2015 04:17:26] - Manifest found for configuration 22339 [Wed 12/16/2015 04:17:26] - Manufacturing image extracted: 22339_mf_mlc_Toshiba_64Gb_TC58NVG6D2HTA00_2Q_2C_1D_S_PP_R01111_s512.vic [Wed 12/16/2015 04:17:26] - Proceeding in ROM mode, download feature 3... [Wed 12/16/2015 04:17:27] - Successfully downloaded MFB to the drive... [Wed 12/16/2015 04:17:27] - Waiting (5 sec) for the drive to settle... [Wed 12/16/2015 04:17:32] - Successfully received the IDENTIFY data from the drive... [Wed 12/16/2015 04:17:32] - Firmware revision reported to be: '582ABBM0'. This indicates MFB download was successful. [Wed 12/16/2015 04:17:32] - Successfully enabled SMART capabilities... [Wed 12/16/2015 04:17:34] - Successfully issued a diagnostic unlock... [Wed 12/16/2015 04:17:35] - Performing the flash test of block 0 (0x0000)... [Wed 12/16/2015 04:17:38] - Flash Test Results: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ----------------------------------------------------------------------------- Flash Test Parameters: ----------------------------------------------------------------------------- Block Count: 0 Page Count: 1 Bus Count: 2 Chip Enabled Count: 2 Die Count: 1 Lane Count: 4 Plane Count: 2 ----------------------------------------------------------------------------- Results Notes: ----------------------- N1 - At least one page tested and passed with no bit errors. N2 - No test data available. Test may have aborted, or failed during the testing. N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power. N4 - At least one erased page tested had bit error rate greater than half the correction power. N5 - Walking zeros test failed. N6 - Walking ones test failed. N7 - Block contained factory bad block markings and testing was skipped. N8 - At least one page tested and had bit error rate greater than the correction power on plane 0. N9 - Block in plane 0 was marked as a factory bad block. N10 - At least one page tested and had bit error rate greater than the correction power on plane 1. N11 - Block in plane 1 was marked as a factory bad block. ----------------------------------------------------------------------------- +------+------+------+------+--------+--------------------------------------------+---------+ | Bus | CE | Die | Lane | Value | Result Notes | Overall | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 0 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 1 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 2 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 3 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 0 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 1 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 2 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 3 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 0 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 1 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 2 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 3 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 0 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 1 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 2 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 3 | 0x0001 | N1 | PASS | +------+------+------+------+--------+--------------------------------------------+---------+ ----------------------------------------------------------------------------- Total Number of test results: 16 Number of failures: 0 Number of Passed with warnings: 0 No. Passed without warnings: 16 ----------------------------------------------------------------------------- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 12/16/2015 04:17:38] - Performing the FORMAT Command with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ MemoryWearCycleCapability = 0 CurrentPE_CycleCount = 0 LifeInSeconds = 0 LogicalCapacity = 250069680 SectorSize = 512 SectorAlignmentOffset = 0 ExpectedMemoryID = 56984 (0xDE98) ExpectedNumDies = 0 SerialOutputControl = 0 Time[8] = 0x0000000000000000 MiscFlag_Erase_R_Block = 0 MiscFlag_PanicHandlingEnabled = 0 MiscFlag_PanicOnSATA_Error = 0 MiscFlag_WriteThrottlingTestMode = 0 MiscFlag_DisableUserBandECCX = 1 L_PageSize = 0 E_PageSize = 0 ErrorCorrectionPower = 0 ConfigDeviceReadDisturbCount = 0 ConfigDeviceReadDisturbCountLow = 0 ExtraOptions_0_1 = 0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 12/16/2015 04:18:11] - FATAL_ERROR: Could not perform the FORMAT() operation on the drive... (0x0000C048:SF_SCT (C048h): Root Creation Failed (MFB format)) [Wed 12/16/2015 04:18:11] - End of Genesis manufacturing log. [Wed 12/16/2015 04:18:11] - Exiting... |