Progaks
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору выкладываю два лога 1 терминал Код: [ROM] Undec Cmd 0xe0 [ROM] Hard Reset ===> Link is Down. [ROM] PHY Ready [ROM] Sig Sent [ROM] Undec Cmd 0xec [ROM] Undec Cmd 0xef [ROM] Undec Cmd 0xef [ROM] Undec Cmd 0xec [ROM] Undec Cmd 0xef [ROM] Data Cmd [ROM] READ NCQ CMD [ROM] R_NCQ done, lba:00000000, count:00000008, tag:00000009 [ROM] Data Cmd [ROM] READ NCQ CMD [ROM] R_NCQ done, lba:00000008, count:00000008, tag:0000000a [ROM] Undec Cmd 0xec [ROM] Data Cmd [ROM] READ NCQ CMD [ROM] R_NCQ done, lba:00000000, count:00000008, tag:00000018 [ROM] Data Cmd [ROM] READ NCQ CMD [ROM] R_NCQ done, lba:00000018, count:00000008, tag:00000019 [ROM] Data Cmd [ROM] READ NCQ CMD [ROM] R_NCQ done, lba:00000008, count:00000008, tag:0000001a [ROM] Data Cmd [ROM] READ NCQ CMD [ROM] R_NCQ done, lba:00000010, count:00000008, tag:0000001b [ROM] Data Cmd [ROM] READ NCQ CMD [ROM] R_NCQ done, lba:00000020, count:00000008, tag:0000001c [ROM] Undec Cmd 0xec [ROM] Undec Cmd 0xec [ROM] Undec Cmd 0xb0 [ROM] Undec Cmd 0x92 [ROM] non-DMA [ROM] Undec Cmd 0x92 [ROM] non-DMA [ROM] Undec Cmd 0x92 [ROM] non-DMA [ROM] Undec Cmd 0x92 [ROM] non-DMA <MFB> ---> Sector size 0 bytes L-Page size 4096 bytes <--- <MFB> *** MFB 503 Jul 19 2012 20:30:22 B:FW_PPRO_MP3_5_0_2_20120315:FW_PPRO_5_0_ 3_Release-448193 *** <MFB> *** Config cfg/cfg_MLC_Micron_64Gb_MT29F128G08CFAAAWP_2Q_2C_1D_S *** *** Chip RevId from HW: B01 (ID=288571), FW Targeted For: B02 ASIC *** <MFB> *** SysClk : 300 MHz *** Packer : 500 MHz *** Flash : 800 MHz *** FlaDiv : 6 <MFB> *** TMI_TS : 2 <MFB> GPIO0:1 <MFB> Scap charge wait <MFB> Scap charge done <usrspc>libSfStartC enter cfg:3fff3058 <MFB> Flash Rblock Test on 0 - bus:2 ce:2 die:1 lane:4 pageCnt:1 correctPwr:128 seed:dead3664 markers:2000 Errors in BUS:0 CE: 0 DIE:0 [ LANE 0: 0002, LANE 1: 0002, LANE 2: 0022, LAN E 3: 0002, <MFB> ] Errors in BUS:1 CE: 0 DIE:0 [ LANE 0: 0002, LANE 1: 0002, LANE 2: 0002, LAN E 3: 0002, <MFB> ] Errors in BUS:0 CE: 1 DIE:0 [ LANE 0: 0002, LANE 1: 0002, LANE 2: 0002, LAN E 3: 0003, <MFB> ] Errors in BUS:1 CE: 1 DIE:0 [ LANE 0: 0002, LANE 1: 0002, LANE 2: 0042, LAN E 3: 0002, <MFB> ] <MFB> Read Device ID: 2C 88 04 4B A9 00 <MFB> == Format mode ONE align 0 == <MFB> ---> Sector size 0 bytes L-Page size 4096 bytes <--- <MFB> Flash ID Check <MFB> Creating New Root <MFB> Bad Block Discovery ... <MFB> Number of Bad Blocks for SE/plane/lane <MFB> SE pl: ln0 ln1 ln2 ln3 <MFB> 0 0: 1 1 1 1 <MFB> 0 1: 1 1 1 1 <MFB> 1 0: 1 1 1 1 <MFB> 1 1: 1 1 2 1 <MFB> 2 0: 1 1 1 1 <MFB> 2 1: 1 1 1 1 <MFB> 3 0: 1 1 1 1 <MFB> 3 1: 1 1 1 1 <MFB> Total Bad Block number is: 33 out of 65536 <MFB> Added donor[0]= 45 <MFB> Added donor[1]= 1335 <MFB> Enabling Remap Unit... <MFB> Erasing All Virgin Blocks... <MFB> Creating the Root Record ... <MFB> Input PE: 0 <MFB> Drive RDD:100000 RDD Low:100000, PE: 3000 Options:0000 Warranty: 0 <MFB> WP Circuit Not Present <MFB> Initialize the Root ... <MFB> Found a valid Config Record. <MFB> Bus Width [bits] = 32 <MFB> Number of CE = 2 <MFB> Number of Die / CE = 1 <MFB> CE CFG (Bus Mode) = 2-DIMM <MFB> Number of Bus = 2 <MFB> Flash Page Size = 8192 <MFB> Flash Page / Block = 256 <MFB> Number of Block / Die = 2048 <MFB> E-Page Size = 512 <MFB> ECC Bytes = 27 <MFB> ECC Correction Power = 16 <MFB> EVT LOG. Panic Dump slot 0 epa 0x00020002 <MFB> EVT LOG. Panic Dump slot 1 epa 0x20020002 <MFB> EVT LOG. Panic Dump slot 2 epa 0x00020082 <MFB> EVT LOG. Panic Dump slot 3 epa 0x20020082 <MFB> Saving Bad Block List ... <MFB> Initializing SMART root file ... <MFB> InitSmartLogRootFile is done <MFB> Saving Grown Defect List ... <MFB> Initializing Life Table ... <MFB> Saving Life Table ... <MFB> Set LBA Offset to 0 ... <MFB> Clearing the Map Table ... <MFB> Clearing the SIN Table ... <MFB> Saving the MAP Table1 ... <MFB> Saving the MAP Table2 ... <MFB> Saving the SIN Table ... <MFB> Saving the Remap Table ... ---> SAVE REMAP/DONOR FID 19 [tbl 1 off 00000 sz 30000] [tbl 2 off 30000 sz 00cc 8] <MFB> TOTAL 30CC8 (199880) bytes 2 ticks <--- <MFB> Verifying the Remap Table ... ---> LOAD REMAP/DONOR FID 19 [tbl 1 off 00000 sz 30000] [tbl 2 off 30000 sz 00cc 8] <MFB> TOTAL 30CC8 (199880) bytes, 1 ticks, 0 remapped <--- <MFB> Saving the RD Table ... <MFB> Saving the ID Data ... <MFB> Saving the Free Table ... <MFB> Finalizing the ROOT ... <MFB> Factory Setup finished; you may reboot or download Flashware now. <usrspc>SCT_CONFIG_DRIVE_UNIQUE: user space synced <MFB> Firmware Fuse=0xFC00FC00, computed value=0xFC00 <MFB> PPRO_STAMP FROM IMAGE: 06 14 00 fc 00 00 20 20 <MFB> STAMP OK at offset 0x000000 <MFB> Need 380672 More! <MFB> SATA_UPDATE_IN_PROGRESS <MFB> Need 315136 More! <MFB> SATA_UPDATE_IN_PROGRESS <MFB> Need 249600 More! <MFB> SATA_UPDATE_IN_PROGRESS <MFB> Need 184064 More! <MFB> SATA_UPDATE_IN_PROGRESS <MFB> Need 118528 More! <MFB> SATA_UPDATE_IN_PROGRESS <MFB> Need 52992 More! <MFB> SATA_UPDATE_IN_PROGRESS <MFB> Validate SHA on Input Stream Microcode: PASS! <MFB> Did not find appendix signature. <MFB> Info 1: not a valid appendix. <MFB> Validate SHA on Root File 3: PASS! <MFB> Validate SHA on Root File 4: PASS! <MFB> Download Microcode PASS! <MFB> SATA_UPDATE_COMPLETE <MFB> Warm Start (state=14) - Resetting ALL hardware blocks! [ROM] Chip ID 0x200026BB *** ROM Rev 20D Dec 20 2010 Build 288571 *** [ROM] Force Download: waiting for Download Microcode Command... [ROM] Waiting for Link to come up... [ROM] Link is UP. [ROM] Undec Cmd 0xec [ROM] Undec Cmd 0xef [ROM] Undec Cmd 0xef [ROM] Undec Cmd 0xec [ROM] Undec Cmd 0xef [ROM] Undec Cmd 0xec | 2 Genesis Код: <?xml version = "1.0"?> <Genesis_Log> <Log_Body> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Overall Summary: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Start Time: Wed, 03/02/2016 @ 10:55:09 End Time: Wed, 03/02/2016 @ 10:56:38 OverallResult: FAIL ExitCode: (0x10090012:SF_GENESIS_IDENTIFY_ERROR) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Environment Settings: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Input Parameters: argv[1]: -PROCESS_SSD argv[2]: 0:0:0:0 argv[3]: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/FW_SF-2000_5_0_3_Client_MP.1.mfp argv[4]: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/Configuration_Files/22189.1.driveconfig argv[5]: 12345 argv[6]: wwww_123 argv[7]: log=/home/admin/123.log Log File: SF_Genesis_Main_Log__Wed_03.02.2016_10.55.09.log Hostname: localhost.localdomain Host IP Address: 127.0.0.1 Port Number: 0 DeviceName: /dev/sg0 SF_Genesis Version: v1.7.0.01020130612-fc14-32bit SF_Core Library Version: v1.7.1.20130612-fc14-32bit SF_OS_Information: Linux 4.4.2-301.fc23.i686 #1 SMP Tue Feb 23 19:29:58 UTC 2016 i686 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Post Processing Device Information: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ WWN OUI: UNKNOWN WWN UniqueID: UNKNOWN Serial No.: UNKNOWN Model No.: UNKNOWN Firmware Revision: UNKNOWN ROM Revision: UNKNOWN NAND Page Size: UNKNOWN Number Of Chip Enable: UNKNOWN Logical Sectors: UNKNOWN NAND ID: UNKNOWN Flash Manufacturer: UNKNOWN Flash Device: UNKNOWN ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit SF_Core Library: v1.7.1.20130612-fc14-32bit Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 03/02/2016 10:55:09] - SF_Genesis has been invoked with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ argv[1]: -PROCESS_SSD argv[2]: 0:0:0:0 argv[3]: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/FW_SF-2000_5_0_3_Client_MP.1.mfp argv[4]: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/Configuration_Files/22189.1.driveconfig argv[5]: 12345 argv[6]: wwww_123 argv[7]: log=/home/admin/123.log ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 03/02/2016 10:55:09] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0' [Wed 03/02/2016 10:55:14] - Issuing a discovery command for device: '0:0:0:0' [Wed 03/02/2016 10:55:19] - Discovery command completed... [Wed 03/02/2016 10:55:19] - Waiting 5 seconds for the system to settle... [Wed 03/02/2016 10:55:24] - Device designation string '0:0:0:0' is mapped to node '/dev/sg0' [Wed 03/02/2016 10:55:24] - Proceeding to process SSD device with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DeviceName = /dev/sg0 MFP Package Filename = /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/FW_SF-2000_5_0_3_Client_MP.1.mfp Configuration File = /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/Configuration_Files/22189.1.driveconfig Serial No. = 12345 World Wide Name = wwww_123 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 03/02/2016 10:55:25] - Successfully received the IDENTIFY data from the drive... [Wed 03/02/2016 10:55:25] - Validating Manufacturing Firmware Package: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/FW_SF-2000_5_0_3_Client_MP.1.mfp [Wed 03/02/2016 10:55:26] - Successfully opened the package: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/FW_SF-2000_5_0_3_Client_MP.1.mfp [Wed 03/02/2016 10:55:26] - file /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/Configuration_Files/22189.1.driveconfig Loaded successfully [Wed 03/02/2016 10:55:27] - Warning: Unable to query diagnostics information to perform power management settings check [Wed 03/02/2016 10:55:27] - B01 Power Management configuration request detected [Wed 03/02/2016 10:55:27] - Successfully extracted *.DriveConfig file: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/Configuration_Files/22189.1.driveconfig [Wed 03/02/2016 10:55:27] - Extracted Config_ID: 1 (22189) in DriveConfig file: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/Configuration_Files/22189.1.driveconfig [Wed 03/02/2016 10:55:27] - Extracted SerialOutputControl: 0 [Wed 03/02/2016 10:55:27] - Searching for flashware image for configuration 22189 [Wed 03/02/2016 10:55:27] - Manifest found for configuration 22189 [Wed 03/02/2016 10:55:27] - Flashware image extracted: 22189_fw_cl_mlc_Micron_64Gb_MT29F128G08CFAAAWP_2Q_2C_1D_S_PP_R00714_s512.vic [Wed 03/02/2016 10:55:27] - Searching for manufacturing image for configuration 22189 [Wed 03/02/2016 10:55:27] - Manifest found for configuration 22189 [Wed 03/02/2016 10:55:27] - Manufacturing image extracted: 22189_mf_mlc_Micron_64Gb_MT29F128G08CFAAAWP_2Q_2C_1D_S_PP_R00714_s512.vic [Wed 03/02/2016 10:55:27] - Proceeding in ROM mode, download feature 3... [Wed 03/02/2016 10:55:27] - Successfully downloaded MFB to the drive... [Wed 03/02/2016 10:55:27] - Waiting (5 sec) for the drive to settle... [Wed 03/02/2016 10:55:32] - Successfully received the IDENTIFY data from the drive... [Wed 03/02/2016 10:55:32] - Firmware revision reported to be: '503ABBM0'. This indicates MFB download was successful. [Wed 03/02/2016 10:55:32] - Successfully enabled SMART capabilities... [Wed 03/02/2016 10:55:34] - Successfully issued a diagnostic unlock... [Wed 03/02/2016 10:55:35] - Performing the flash test of block 0 (0x0000)... [Wed 03/02/2016 10:55:37] - Flash Test Results: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ----------------------------------------------------------------------------- Flash Test Parameters: ----------------------------------------------------------------------------- Block Count: 0 Page Count: 1 Bus Count: 2 Chip Enabled Count: 2 Die Count: 1 Lane Count: 4 Plane Count: 2 ----------------------------------------------------------------------------- Results Notes: ----------------------- N1 - At least one page tested and passed with no bit errors. N2 - No test data available. Test may have aborted, or failed during the testing. N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power. N4 - At least one erased page tested had bit error rate greater than half the correction power. N5 - Walking zeros test failed. N6 - Walking ones test failed. N7 - Block contained factory bad block markings and testing was skipped. N8 - At least one page tested and had bit error rate greater than the correction power on plane 0. N9 - Block in plane 0 was marked as a factory bad block. N10 - At least one page tested and had bit error rate greater than the correction power on plane 1. N11 - Block in plane 1 was marked as a factory bad block. ----------------------------------------------------------------------------- +------+------+------+------+--------+--------------------------------------------+---------+ | Bus | CE | Die | Lane | Value | Result Notes | Overall | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 0 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 1 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 2 | 0x0022 | N3,N5 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 3 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 0 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 1 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 2 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 3 | 0x0003 | N1,N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 0 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 1 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 2 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 3 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 0 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 1 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 2 | 0x0042 | N3,N6 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 3 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ ----------------------------------------------------------------------------- Total Number of test results: 16 Number of failures: 0 Number of Passed with warnings: 16 No. Passed without warnings: 0 ----------------------------------------------------------------------------- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 03/02/2016 10:55:37] - Performing the FORMAT Command with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ MemoryWearCycleCapability = 0 CurrentPE_CycleCount = 0 LifeInSeconds = 0 LogicalCapacity = 234441648 SectorSize = 512 SectorAlignmentOffset = 0 ExpectedMemoryID = 34860 (0x882C) ExpectedNumDies = 0 SerialOutputControl = 0 Time[8] = 0x0000000000000000 MiscFlag_Erase_R_Block = 0 MiscFlag_PanicHandlingEnabled = 0 MiscFlag_PanicOnSATA_Error = 0 MiscFlag_WriteThrottlingTestMode = 0 MiscFlag_DisableUserBandECCX = 0 L_PageSize = 0 E_PageSize = 0 ErrorCorrectionPower = 0 ConfigDeviceReadDisturbCount = 0 ConfigDeviceReadDisturbCountLow = 0 ExtraOptions_0_1 = 0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 03/02/2016 10:56:14] - FORMAT command completed... [Wed 03/02/2016 10:56:14] - Waiting (2 sec) for the drive to settle... [Wed 03/02/2016 10:56:16] - Setting up the stamp information through CDU command... [Wed 03/02/2016 10:56:19] - Waiting (2 sec) for the drive to settle... [Wed 03/02/2016 10:56:21] - Downloading the flashware to the drive... feature 3 [Wed 03/02/2016 10:56:23] - Successfully downloaded flashware to the drive... [Wed 03/02/2016 10:56:23] - Waiting (15 sec) for the drive to settle... [Wed 03/02/2016 10:56:38] - Successfully received the IDENTIFY data from the drive... [Wed 03/02/2016 10:56:38] - FATAL_ERROR: Did not recieve the correct firmware revision. it is reported to be: '20DABBR0', indicating flashware download has failed. [Wed 03/02/2016 10:56:38] - End of Genesis manufacturing log. [Wed 03/02/2016 10:56:38] - Exiting... </Log_Body> <Overall_Summary> <Start_Time> Wed, 03/02/2016 @ 10:55:09 </Start_Time> <End_Time> Wed, 03/02/2016 @ 10:56:38 </End_Time> <Overall_Result> FAIL </Overall_Result> <Exit_Code> (0x10090012:SF_GENESIS_IDENTIFY_ERROR) </Exit_Code> </Overall_Summary> <Environment_Settings> <Input_Parameters> argv[1]: -PROCESS_SSD argv[2]: 0:0:0:0 argv[3]: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/FW_SF-2000_5_0_3_Client_MP.1.mfp argv[4]: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/Configuration_Files/22189.1.driveconfig argv[5]: 12345 argv[6]: wwww_123 argv[7]: log=/home/admin/123.log </Input_Parameters> <Log_File> SF_Genesis_Main_Log__Wed_03.02.2016_10.55.09.log </Log_File> <Hostname> localhost.localdomain </Hostname> <Host_IP_Address> 127.0.0.1 </Host_IP_Address> <Port_Number> 0 </Port_Number> <Device_Name> /dev/sg0 </Device_Name> <SF_Genesis_Version> v1.7.0.01020130612-fc14-32bit </SF_Genesis_Version> <SF_Core_Library_Version> v1.7.1.20130612-fc14-32bit </SF_Core_Library_Version> <SF_OS_Information> Linux 4.4.2-301.fc23.i686 #1 SMP Tue Feb 23 19:29:58 UTC 2016 i686 </SF_OS_Information> </Environment_Settings> <Post_Processing_Device_Info> <WWN_OUI> UNKNOWN </WWN_OUI> <WWN_UniqueID> UNKNOWN </WWN_UniqueID> <Serial_Number> UNKNOWN </Serial_Number> <Model_Number> UNKNOWN </Model_Number> <Firmware_Revision> UNKNOWN </Firmware_Revision> <ROM_Revision> UNKNOWN </ROM_Revision> <NAND_Page_Size> UNKNOWN </NAND_Page_Size> <Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable> <Logical_Sectors> UNKNOWN </Logical_Sectors> <NAND_ID> UNKNOWN </NAND_ID> <Flash_Manufacturer> UNKNOWN </Flash_Manufacturer> <Flash_Device> UNKNOWN </Flash_Device> </Post_Processing_Device_Info> </Genesis_Log> [Wed 03/02/2016 10:56:38] - Overall Result for Device: /dev/sg0 ****** FAIL ****** | |