bsg
Junior Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору [more] AlexeyIII Лог: <?xml version = "1.0"?> <Genesis_Log> <Log_Body> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Overall Summary: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Start Time: Fri, 03/11/2016 @ 13:25:18 End Time: Fri, 03/11/2016 @ 13:26:53 OverallResult: FAIL ExitCode: (0x10090012:SF_GENESIS_IDENTIFY_ERROR) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Environment Settings: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Input Parameters: argv[1]: -PROCESS_SSD argv[2]: 0:0:0:0 argv[3]: /home/bsg/SSD/FW_582--0/FW_582.0.mfp argv[4]: /home/bsg/SSD/FW_582--0/Configuration_Files/27289.0.driveconfig argv[5]: 12345 argv[6]: www_123 argv[7]: log=/home/bsg/SSD/fw.log Log File: SF_Genesis_Main_Log__Fri_03.11.2016_13.25.18.log Hostname: localhost.localdomain Host IP Address: 127.0.0.1 Port Number: 2 DeviceName: /dev/sg2 SF_Genesis Version: v1.7.0.01020130612-fc14-32bit SF_Core Library Version: v1.7.1.20130612-fc14-32bit SF_OS_Information: Linux 4.2.3-300.fc23.i686 #1 SMP Mon Oct 5 16:26:47 UTC 2015 i686 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Post Processing Device Information: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ WWN OUI: UNKNOWN WWN UniqueID: UNKNOWN Serial No.: UNKNOWN Model No.: UNKNOWN Firmware Revision: UNKNOWN ROM Revision: UNKNOWN NAND Page Size: UNKNOWN Number Of Chip Enable: UNKNOWN Logical Sectors: UNKNOWN NAND ID: UNKNOWN Flash Manufacturer: UNKNOWN Flash Device: UNKNOWN ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit SF_Core Library: v1.7.1.20130612-fc14-32bit Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Fri 03/11/2016 13:25:18] - SF_Genesis has been invoked with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ argv[1]: -PROCESS_SSD argv[2]: 0:0:0:0 argv[3]: /home/bsg/SSD/FW_582--0/FW_582.0.mfp argv[4]: /home/bsg/SSD/FW_582--0/Configuration_Files/27289.0.driveconfig argv[5]: 12345 argv[6]: www_123 argv[7]: log=/home/bsg/SSD/fw.log ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Fri 03/11/2016 13:25:18] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0' [Fri 03/11/2016 13:25:23] - Issuing a discovery command for device: '0:0:0:0' [Fri 03/11/2016 13:25:29] - Discovery command completed... [Fri 03/11/2016 13:25:29] - Waiting 5 seconds for the system to settle... [Fri 03/11/2016 13:25:34] - Device designation string '0:0:0:0' is mapped to node '/dev/sg2' [Fri 03/11/2016 13:25:34] - Proceeding to process SSD device with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DeviceName = /dev/sg2 MFP Package Filename = /home/bsg/SSD/FW_582--0/FW_582.0.mfp Configuration File = /home/bsg/SSD/FW_582--0/Configuration_Files/27289.0.driveconfig Serial No. = 12345 World Wide Name = www_123 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Fri 03/11/2016 13:25:45] - Successfully received the IDENTIFY data from the drive... [Fri 03/11/2016 13:25:45] - Validating Manufacturing Firmware Package: /home/bsg/SSD/FW_582--0/FW_582.0.mfp [Fri 03/11/2016 13:25:45] - Successfully opened the package: /home/bsg/SSD/FW_582--0/FW_582.0.mfp [Fri 03/11/2016 13:25:45] - file /home/bsg/SSD/FW_582--0/Configuration_Files/27289.0.driveconfig Loaded successfully [Fri 03/11/2016 13:25:45] - Warning: Unable to query diagnostics information to perform power management settings check [Fri 03/11/2016 13:25:45] - B01 Power Management configuration request detected [Fri 03/11/2016 13:25:45] - Successfully extracted *.DriveConfig file: /home/bsg/SSD/FW_582--0/Configuration_Files/27289.0.driveconfig [Fri 03/11/2016 13:25:45] - Extracted Config_ID: 1 (27289) in DriveConfig file: /home/bsg/SSD/FW_582--0/Configuration_Files/27289.0.driveconfig [Fri 03/11/2016 13:25:45] - Extracted SerialOutputControl: 0 [Fri 03/11/2016 13:25:45] - Searching for flashware image for configuration 27289 [Fri 03/11/2016 13:25:45] - Manifest found for configuration 27289 [Fri 03/11/2016 13:25:45] - Flashware image extracted: 27289_fw_cl_mlc_Toshiba_64Gb_TH58TEG8DBHBA8C_2Q_2C_1D_PP_R01331_s512.vic [Fri 03/11/2016 13:25:45] - Searching for manufacturing image for configuration 27289 [Fri 03/11/2016 13:25:45] - Manifest found for configuration 27289 [Fri 03/11/2016 13:25:45] - Manufacturing image extracted: 27289_mf_mlc_Toshiba_64Gb_TH58TEG8DBHBA8C_2Q_2C_1D_PP_R01331_s512.vic [Fri 03/11/2016 13:25:45] - Proceeding in ROM mode, download feature 3... [Fri 03/11/2016 13:25:45] - Successfully downloaded MFB to the drive... [Fri 03/11/2016 13:25:45] - Waiting (5 sec) for the drive to settle... [Fri 03/11/2016 13:25:51] - Successfully received the IDENTIFY data from the drive... [Fri 03/11/2016 13:25:51] - Firmware revision reported to be: '582ABBM0'. This indicates MFB download was successful. [Fri 03/11/2016 13:25:51] - Successfully enabled SMART capabilities... [Fri 03/11/2016 13:25:53] - Successfully issued a diagnostic unlock... [Fri 03/11/2016 13:25:54] - Performing the flash test of block 0 (0x0000)... [Fri 03/11/2016 13:25:57] - Flash Test Results: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ----------------------------------------------------------------------------- Flash Test Parameters: ----------------------------------------------------------------------------- Block Count: 0 Page Count: 1 Bus Count: 2 Chip Enabled Count: 2 Die Count: 1 Lane Count: 4 Plane Count: 2 ----------------------------------------------------------------------------- Results Notes: ----------------------- N1 - At least one page tested and passed with no bit errors. N2 - No test data available. Test may have aborted, or failed during the testing. N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power. N4 - At least one erased page tested had bit error rate greater than half the correction power. N5 - Walking zeros test failed. N6 - Walking ones test failed. N7 - Block contained factory bad block markings and testing was skipped. N8 - At least one page tested and had bit error rate greater than the correction power on plane 0. N9 - Block in plane 0 was marked as a factory bad block. N10 - At least one page tested and had bit error rate greater than the correction power on plane 1. N11 - Block in plane 1 was marked as a factory bad block. ----------------------------------------------------------------------------- +------+------+------+------+--------+--------------------------------------------+---------+ | Bus | CE | Die | Lane | Value | Result Notes | Overall | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 0 | 0x0003 | N1,N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 1 | 0x0003 | N1,N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 2 | 0x0003 | N1,N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 3 | 0x0003 | N1,N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 0 | 0x0003 | N1,N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 1 | 0x0023 | N1,N3,N5 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 2 | 0x0003 | N1,N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 3 | 0x0003 | N1,N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 0 | 0x0003 | N1,N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 1 | 0x0023 | N1,N3,N5 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 2 | 0x0003 | N1,N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 3 | 0x0023 | N1,N3,N5 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 0 | 0x0003 | N1,N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 1 | 0x0003 | N1,N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 2 | 0x0003 | N1,N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 3 | 0x0023 | N1,N3,N5 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ ----------------------------------------------------------------------------- Total Number of test results: 16 Number of failures: 0 Number of Passed with warnings: 16 No. Passed without warnings: 0 ----------------------------------------------------------------------------- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Fri 03/11/2016 13:25:57] - Performing the FORMAT Command with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ MemoryWearCycleCapability = 0 CurrentPE_CycleCount = 0 LifeInSeconds = 0 LogicalCapacity = 250069680 SectorSize = 512 SectorAlignmentOffset = 0 ExpectedMemoryID = 56984 (0xDE98) ExpectedNumDies = 0 SerialOutputControl = 0 Time[8] = 0x0000000000000000 MiscFlag_Erase_R_Block = 0 MiscFlag_PanicHandlingEnabled = 0 MiscFlag_PanicOnSATA_Error = 0 MiscFlag_WriteThrottlingTestMode = 0 MiscFlag_DisableUserBandECCX = 1 L_PageSize = 0 E_PageSize = 0 ErrorCorrectionPower = 0 ConfigDeviceReadDisturbCount = 0 ConfigDeviceReadDisturbCountLow = 0 ExtraOptions_0_1 = 0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Fri 03/11/2016 13:26:28] - FORMAT command completed... [Fri 03/11/2016 13:26:28] - Waiting (2 sec) for the drive to settle... [Fri 03/11/2016 13:26:30] - Setting up the stamp information through CDU command... [Fri 03/11/2016 13:26:33] - Waiting (2 sec) for the drive to settle... [Fri 03/11/2016 13:26:35] - Downloading the flashware to the drive... feature 3 [Fri 03/11/2016 13:26:38] - Successfully downloaded flashware to the drive... [Fri 03/11/2016 13:26:38] - Waiting (15 sec) for the drive to settle... [Fri 03/11/2016 13:26:53] - Successfully received the IDENTIFY data from the drive... [Fri 03/11/2016 13:26:53] - FATAL_ERROR: Did not recieve the correct firmware revision. it is reported to be: '306ABBR0', indicating flashware download has failed. [Fri 03/11/2016 13:26:53] - End of Genesis manufacturing log. [Fri 03/11/2016 13:26:53] - Exiting... </Log_Body> <Overall_Summary> <Start_Time> Fri, 03/11/2016 @ 13:25:18 </Start_Time> <End_Time> Fri, 03/11/2016 @ 13:26:53 </End_Time> <Overall_Result> FAIL </Overall_Result> <Exit_Code> (0x10090012:SF_GENESIS_IDENTIFY_ERROR) </Exit_Code> </Overall_Summary> <Environment_Settings> <Input_Parameters> argv[1]: -PROCESS_SSD argv[2]: 0:0:0:0 argv[3]: /home/bsg/SSD/FW_582--0/FW_582.0.mfp argv[4]: /home/bsg/SSD/FW_582--0/Configuration_Files/27289.0.driveconfig argv[5]: 12345 argv[6]: www_123 argv[7]: log=/home/bsg/SSD/fw.log </Input_Parameters> <Log_File> SF_Genesis_Main_Log__Fri_03.11.2016_13.25.18.log </Log_File> <Hostname> localhost.localdomain </Hostname> <Host_IP_Address> 127.0.0.1 </Host_IP_Address> <Port_Number> 2 </Port_Number> <Device_Name> /dev/sg2 </Device_Name> <SF_Genesis_Version> v1.7.0.01020130612-fc14-32bit </SF_Genesis_Version> <SF_Core_Library_Version> v1.7.1.20130612-fc14-32bit </SF_Core_Library_Version> <SF_OS_Information> Linux 4.2.3-300.fc23.i686 #1 SMP Mon Oct 5 16:26:47 UTC 2015 i686 </SF_OS_Information> </Environment_Settings> <Post_Processing_Device_Info> <WWN_OUI> UNKNOWN </WWN_OUI> <WWN_UniqueID> UNKNOWN </WWN_UniqueID> <Serial_Number> UNKNOWN </Serial_Number> <Model_Number> UNKNOWN </Model_Number> <Firmware_Revision> UNKNOWN </Firmware_Revision> <ROM_Revision> UNKNOWN </ROM_Revision> <NAND_Page_Size> UNKNOWN </NAND_Page_Size> <Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable> <Logical_Sectors> UNKNOWN </Logical_Sectors> <NAND_ID> UNKNOWN </NAND_ID> <Flash_Manufacturer> UNKNOWN </Flash_Manufacturer> <Flash_Device> UNKNOWN </Flash_Device> </Post_Processing_Device_Info> </Genesis_Log> [Fri 03/11/2016 13:26:53] - Overall Result for Device: /dev/sg2 ****** FAIL ****** | Всего записей: 36 | Зарегистр. 27-02-2016 | Отправлено: 13:27 12-03-2016 | Исправлено: bsg, 13:35 12-03-2016 |
|