igor_me
Gold Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору Error code Explanation Definition Status ============================================================================================================== 000 No Errors Found Successful operation. The drive is defect free. No Errors. -------------------------------------------------------------------------------------------------------------- 100 No Errors Found Successful operation. The drive is defect free. No Errors -------------------------------------------------------------------------------------------------------------- 101 Unknown Error An unknown error has occurred during testing. This may be an anomaly. Check connections and retest. If the error repeats, replace the drive. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 102 Seek Timeout A Seek command did not complete in the time allotted for its completion. This may be an anomaly or a defect with the drive. Retest. Replace the drive if the error repeats. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 103 Write Fault Error A Write command during the test has failed to complete. This may be due to a media or read/write error. It may also be due to a defective connection. Retest after checking the connections. Replace the drive if the error repeats. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 104 Drive Not Ready The drive did not properly respond to test commands. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Check cabling and retest. Replace the drive if the error repeats. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 106 Track 0 Error Track 0 was not properly detected. Track 0 on the drive must be accessed to perform parts of various internal tests. Track 0 also holds information about the drive. This error may have internal and external reasons. Retest. Replace the drive if the error repeats. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 107 Check Sum Error Accumulated test data on the drives is corrupted. Check cabling & retest. Replace the drive if the error repeats. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 108 Seek Not Complete A Seek command did not complete in the time allotted. This may be an anomaly or a defect with the drive. Retest. Replace the drive if the error repeats. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 112 IRQ Timeout Interrupt ReQuest Interrupt signal not received. An interrupt command to perform a specific task failed to complete. This may be due to an internal error or to a failed connection which did not allow the interrupt command to be sent to the drive properly. Check cabling and retest. Replace the drive if the error repeats. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 115 ICRC Error Ultra DMA CRC error. Data sent between the host computer and the drive has been corrupted. If the system cannot properly handle a drive running a specific Ultra ATA rate such as ATA100, the data may become corrupted. To run in ATA 66 and ATA100 rates, an Ultra ATA 80 -conductor cable must be used. Check cabling & retest. May need to run DLGUDMA to set the drive to a slower speed or replace the IDE cable. You may also want to reroute your IDE cable away from sources of electronic bus noise such as your CPU, Power Supply, etc. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 116 IDNF Error Address Not Found Error. The Identify Drive Command has not received an acceptable response from the drive. This may be due to a defect. Ensure that you are using the latest version of diagnostic utility and that your cable is in good working condition. Retest. Replace the drive if the error repeats. Re-Test Drive with latest diagnostic utility -------------------------------------------------------------------------------------------------------------- 117 Uncorrectable ECC Error Uncorrectable Error Correction Code (ECC) Error. There could be media errors present on this drive. If the automatic repair feature is unable to repair these errors, replace the drive. Replace drive if unable to correct error -------------------------------------------------------------------------------------------------------------- 118 DAM Error Data Address Mark (DAM) Error. There may be media errors present on this drive. If the automatic repair feature is unable to repair these errors, replace the drive. Replace drive if unable to correct error -------------------------------------------------------------------------------------------------------------- 120 Unknown Error An unknown error has occurred during testing. This may be an anomaly. Check connections and retest. If the error repeats, replace the drive. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 121 Servo Error Servo error. This error is most likely an internal malfunction of the drive and not related to the condition of the cables etc. Retest and replace the drive if the error repeats. Re-test -------------------------------------------------------------------------------------------------------------- 132 Command Error Command Aborted. Please ensure that you are using the version of diagnostic utility corresponding to either newer or older Western Digital drives. Re-test Drive with appropriate diagnostic utility -------------------------------------------------------------------------------------------------------------- 133 Illegal ID FW overlay not found. The information file, which holds the data pertaining to this drive, is corrupted or missing. Replace the drive. Re-test Drive --- 134 Busy Timeout Timeout from checking busy bit. The drive has not responded back in the time allotted. This may be due to a defect with the drive or a bad connection. Check cable & retest. Replace the drive if the error repeats. Re-test Drive -------------------------------------------------------------------------------------------------------------- 135 DRQ Timeout Timeout from checking Data ReQuest Timeout (DRQ) bit. The drive has not responded back in the time allotted. This may be due to a defect with the drive or a bad connection. Check cable & retest. Replace the drive if the error repeats. Re-test Drive -------------------------------------------------------------------------------------------------------------- 136 Bad Sector Sector Marked Bad Error. There may be repairable media errors on a platter. The automatic repair feature can attempt a repair if possible. You may need to rescan to ensure that the repairs were effective. Replace the drive if the repair fails. Re-test Drive -------------------------------------------------------------------------------------------------------------- 137 Relocated Sector Sector Relocated. There may be repairable media errors on a platter. The automatic repair feature can attempt a repair if possible. You may need to rescan to ensure that the repairs were effective. Replace the drive if the error repeats. Re-test Drive -------------------------------------------------------------------------------------------------------------- 138 Still Busy Timeout Timeout from checking busy bit. The drive has not responded in the time allotted. This may be due to a defect with the drive or a bad connection. Check cable and retest. Replace the drive if the error repeats. Re-test Drive -------------------------------------------------------------------------------------------------------------- 148 Not Selected Drive not selected. The drive may not have been accessed properly possibly due to a bad connection. Replace your cable and retest. Replace the drive if the error repeats. Re-test Drive -------------------------------------------------------------------------------------------------------------- 159 SMART Error Self Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. The drive is defective. Replace. Replace Drive -------------------------------------------------------------------------------------------------------------- 163 Unknown Error Queued command timed out. The command set to be executed has timed out. This may be a drive issue, however it may be related to a defective connection. Replace your cable and retest the drive. Further errors indicate a defective drive. Replace. Replace Drive -------------------------------------------------------------------------------------------------------------- 200 Drive Not Tested Supported WD drives are initialized with this status. This is the pretest initialization code which indicates a drive is ready to be tested, but has not yet been tested. Re-test Drive -------------------------------------------------------------------------------------------------------------- 201 Non-WD Drive The drive does not have a WD serial number. This error can occur on non-Western Digital drives. It may also happen when the wrong version of diagnostic utility is used. It is also possible to see this error on defective Western Digital drives. Re-test Drive with appropriate diagnostic utility -------------------------------------------------------------------------------------------------------------- 202 Drive Not Supported Older Western Digital drives are not supported by the diagnostic utility version being used. Use the appropriate version. Version 4.12 for older drives and version 5.00 for current drives. Non-WD drives are not supported. Re-test Drive with appropriate diagnostic utility -------------------------------------------------------------------------------------------------------------- 204 Missing Log File The log file that existed at startup of diagnostic utility has been moved or no longer exists. Create and use a new DLG Tools diskette. Re-test Drive with appropriate diagnostic utility -------------------------------------------------------------------------------------------------------------- 205 Aborted By User Test was aborted by the user (Alt-X pressed during a test). Re-test Drive -------------------------------------------------------------------------------------------------------------- 206 Memory Allocation Error Unable to allocate memory for program structures. Please ensure that you are not loading any other DOS level files from the floppy prior to running diagnostic utility. This error may also appear if the floppy has been infected by a hidden virus. Check your floppy and retest. Check Floppy and use appropriate diagnostic utility -------------------------------------------------------------------------------------------------------------- 207 Critical Resource Error Unable to locate and/or use a system resource (e.g. - printer). The printer may not be attached or turned on. This error may also be related to memory issues. Please ensure that you are not loading any other DOS level files from the floppy prior to running diagnostic utility. This error may also appear if the floppy has been infected by a hidden virus. Check your floppy and retest. Check Floppy and use appropriate diagnostic utility -------------------------------------------------------------------------------------------------------------- 209 Self Test Failed To Run SMART Self Test failed to start when executed. The drive has not responded to the SMART test request. The drive has failed and must be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 210 Self Test Incomplete SMART Self Test failed to complete (e.g. -- timed out). The failure to complete the test indicates a failed drive. Replace. Replace Drive -------------------------------------------------------------------------------------------------------------- 211 2-9 Uncorr ECC Errors Error Correction Code (ECC) 2 through 9. A number of ECC errors (between 2 through 9) have been detected. ECC is a hardware correction technique that corrects errors. If ECC occurs, use Data Lifeguard repair option for additional error correction. Retest the drive with Data Lifeguard. Re-test and Repair Option diagnostic utility -------------------------------------------------------------------------------------------------------------- 212 10+ Uncorr ECC Errors Error Correction Code (ECC) 10+. At least ten ECC errors have been detected. ECC is a hardware correction technique that corrects errors. If ECC occurs, use Data Lifeguard for additional error correction. Re-test the drive with Data Lifeguard. Re-test Drive -------------------------------------------------------------------------------------------------------------- 213 2-9 DAM Errors Data Address Mark (DAM) 2-9. Several instances of information on data positioning and location could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 214 10+ DAM Errors Data Address Mark (DAM) 10+. Ten or more instances of information on data positioning and location could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 215 2-9 IDNF Errors Identified Data Not Found (IDNF) 2-9. Several instances of information on data positioning and location could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 216 10+ IDNF Errors Identified Data Not Found (IDNF) 10+. Ten or more instances of information on data positioning and location could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 217 2-9 SERVO Errors SERVO 2-9. SERVO is data on track location. Several instances of track information could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 218 10+ SERVO Errors SERVO 10+. SERVO is data on track location. Ten or more instances of track information could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 219 Drive Cable Error Failure during cable test. The cable is loose, broken, or not plugged in. spam_detected your connections and replace the cable. Retest the drive. Re-test Drive -------------------------------------------------------------------------------------------------------------- 220 Drive is Locked Security feature of the drive reports locked status. Some vendors use the security feature to ensure the usage of only specific drives in their system, or the drive may have been locked by a user using a third party utility to enable this feature. The same utility and the original code used to lock the drive are necessary to unlock this drive. Please contact the system vendor for the above-mentioned information. Contact System Vendor -------------------------------------------------------------------------------------------------------------- 221 Test Not Supported Certain older drives do not support certain SMART Self Tests. Please ensure that you are using the proper version of diagnostic utility. Re-test with appropriate diagnostic utility -------------------------------------------------------------------------------------------------------------- 222 Drive Failed the Test The drive has failed the SMART test. Replace the drive. Replace Drive -------------------------------------------------------------------------------------------------------------- 223 Errors Repaired Errors found, but have been repaired successfully. There were media errors that were within the repair capabilities of diagnostic utility. The drive should now be defect free. Test complete Defect Free -------------------------------------------------------------------------------------------------------------- 224 Errors not Repaired Errors found and have not been repaired. There were too many errors found on this drive to be repaired. Replace the drive. Replace Drive -------------------------------------------------------------------------------------------------------------- 225 Too Many Errors Found Error count reached a threshold value. There are too many errors detected on this drive to be repaired. Replace the drive. Replace Drive -------------------------------------------------------------------------------------------------------------- 226 Sector Relocation Error Failure to relocate a sector during drive repair. The drive has to be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 227 SMART Not Supported Self Monitoring, Analysis, and Reporting Technology (SMART) Certain older drives do not support SMART. Please ensure that you are using the appropriate version of diagnostic utility. If the errors continue, replace the drive. Re-test with appropriate diagnostic utility -------------------------------------------------------------------------------------------------------------- 0001 - 0008, 0015 SMART Error Self Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. The drive is defective. Replace Drive -------------------------------------------------------------------------------------------------------------- 0009 - 0014 SMART Error Self Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. Retest the drive. Replace the drive if the error repeats. Re-test Drive ============================================================================================================== If the error code you encountered is not found from the list above, please contact us. Data Lifeguard Tools 2.8 Error Codes ** If you encounter the same error code more than once after re-testing, we recommend for you to create an RMA. Error code Explanation Definition Status -------------------------------------------------------------------------------------------------------------- 199 Error code for Online Diagnostic The Online Diagnostic has determined the drive needs to be tested by our Data Lifeguard Tools. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 203 DRM Attribute too low before media scan. Drive Reliability Monitor. An onboard defect counter has determined the drive has too many errors and should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 204 DRM Attribute too low after media scan. Drive Reliability Monitor. An onboard defect counter has determined the drive has too many errors and should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 207 SMART status failed before the media scan. Self Monitoring, Analysis, and Reporting Technology. This is a monitoring system, which stores all errors, retries, and power on hours. Computers with S.M.A.R.T. enabled help you monitor a drive's internal status through diagnostic commands. In order for S.M.A.R.T. to report if a drive has failed, it must be enabled as a system option. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 208 SMART status failed after the media scan. Self Monitoring, Analysis, and Reporting Technology. This is a monitoring system, which stores all errors, retries, and power on hours. Computers with S.M.A.R.T. enabled help you monitor a drive's internal status through diagnostic commands. In order for S.M.A.R.T. to report if a drive has failed, it must be enabled as a system option. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 209 Previous Error Code not found Data Lifeguard Diag could not determine a previous error code. Please re-test the drive with Data Lifeguard. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 210 Self Test Failed The drive's internal self-test reported unrepairable errors. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 211 Self Test Never Completed The drives internal self-test could not complete due to unrepairable errors. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 212 Error while relocating TARE sectors. Transparent Auto RElocate. An error was reported by the drive during the Write command (to cause the auto-relocation) or the Read Verify command (to verify the relocation happened). Replace Drive -------------------------------------------------------------------------------------------------------------- 213 2-9 DAM Errors Data Address Mark (DAM) 2-9. Several instances of information on data positioning and location could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 256 ECC 1 Error Correction Code. An error has been detected. ECC is a hardware correction technique that corrects errors. If ECC occurs, use Data Lifeguard repair option for additional error correction. Please re-test the drive --------------------------------------------------------------------------------------------------------------with Data Lifeguard. Re-Test Drive 257 ECC 2-9 Error Correction Code. Between two to nine errors have been detected. ECC is a hardware correction technique that corrects errors. If ECC occurs, use Data Lifeguard repair option for additional error correction. Please re-test the drive with Data Lifeguard. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 258 ECC 10+ Error Correction Code. At least ten errors have been detected. ECC is a hardware correction technique that corrects errors. If ECC occurs, use Data Lifeguard for additional error correction. Please re-test the drive with Data Lifeguard. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 356 DAM 1 Data Address Mark. One instance of information on data positioning and location could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 357 DAM 2-9 Data Address Mark. Several instances of information on data positioning and location could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 358 DAM 10+ Data Address Mark. Ten or more instances of information on data positioning and location could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 456 IDNF 1 Identified Data Not Found. One instance of information on data positioning and location could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 457 IDNF 2-9 Identified Data Not Found. Several instances of information on data positioning and location could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 458 IDNF 10+ Identified Data Not Found. Ten or more instances of information on data positioning and location could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 550 Abort Cmd Abort Command. A command executed by Data Lifeguard Tools was rejected. Please re-test the drive with Data Lifeguard. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 556 SERVO 1 SERVO is data on track location. One instance of track information could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 557 SERVO 2-9 SERVO is data on track location. Several instances of track information could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 558 SERVO 10+ SERVO is data on track location. Ten or more instances of track information could not be found. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 570 No Recalibration Recalibration command failed. This error occurs when the drive could not read Track Zero. A clicking noise can indicate that this error has occurred. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 580 Missing Interrupt An interrupt request failed during the test process. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 581 Write Fault When either writing zeros or relocating a sector, the Write command failed. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 582 Drive Not Ready Internal communication issue. The drive has detected an unstable condition, possibly an incorrect spin speed. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 584 Diag Command Error During a Quick Test, the sefl-test failed. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 585 Busy Timeout During a read verify, a command could not be completed. Please re-test the drive with Data Lifeguard. Re-Test Drive -------------------------------------------------------------------------------------------------------------- 586 DRQ Timeout Data ReQuest Timeout. Data request has timed out when writing to the drive. Drive should be replaced. Replace Drive -------------------------------------------------------------------------------------------------------------- 587 Bad Sector The previous relocation of a sector has failed. Drive should be replaced. Replace Drive ============================================================================================================== define SUCCESS 0x0000 define SCT_INVALID_FUNCTION_CODE 0x0001 define SCT_INVALID_LBA 0x0002 define SCT_REQ_SECNT_OVERFLOW 0x0003 define SCT_INVALID_ERR_RECOVERY_FUNCODE 0x0004 define SCT_INVALID_ERR_RECOVERY_SELECTCODE 0x0005 define SCT_HOST_RD_TIMER_LESS_THAN_MIN 0x0006 define SCT_HOST_WR_TIMER_LESS_THAN_MIN 0x0007 define SCT_BKG_CMD_ABORT_BY_INT_HOST_CMD 0x0008 define SCT_BKG_CMD_TERMINATED_UNREC_SERVO_ERR 0x0009 define SCT_INVALID_FUNC_CODE_IN_LNG_SCTR_ACC_CMD 0x000A define SCT_DATA_XFER_CMD_ISSUED_WO_SCT_KEYSECTOR_CMD 0x000B define SCT_INVALID_FUNC_CODE_IN_FEAT_CNTL_CMD 0x000C define SCT_INVALID_FEATURE_CODE_IN_FEAT_CNTL_CMD 0x000D define SCT_INVALID_NEW_STATE_FEATCTL_CMD 0x000E define SCT_INVALID_OPTION_FLAGS_VAL_IN_FEAT_CNTL_CMD 0x000F define SCT_INVALID_ACTION_CODE 0x0010 define SCT_INVALID_TABLE_ID 0x0011 define SCT_CMD_ABRT_DRV_SECURITY_LOCK 0x0012 define SCT_INVALID_REVISION_CODE 0x0013 define VSCE_CTLR_FW_REQ_CMD_ABRT 0x0801 define VSCE_ILLEGAL_DRIVE_MODEL 0x0802 define VSCE_ILLEGAL_PARM0 0x0803 define VSCE_ILLEGAL_PARM1 0x0804 define VSCE_ILLEGAL_PARM2 0x0805 define VSCE_ILLEGAL_PARM3 0x0806 define VSCE_ILLEGAL_CMD 0x0807 define VSCE_FATAL_SERVO_ERR 0x0808 define VSCE_TIMEOUT_ERR 0x0809 define VSCE_INDEX_NOT_FOUND_ERR 0x080A define VSCE_SEC_CNT_MISMATCH_ERR 0x080B define VSCE_SAM_ERR 0x080C define VSCE_UNABLE_TO_SPINUP 0x080D define VSCE_UNABLE_TO_SPINDOWN 0x080E define VSCE_UNABLE_TO_SPEED 0x080F define VSCE_BURST_SYNC_FAIL 0x0810 define VSCE_UNLATCH_FAIL 0x0811 define VSCE_CTR_PD_SEEK_FAIL 0x0812 define VSCE_BURST_SLOPE_CALIBR_FAIL 0x0813 define VSCE_FLEX_BIAL_CALIBR_FAIL 0x0814 define VSCE_MOTOR_TORQUE_CALIBR_FAIL 0x0815 define VSCE_RRO_CALIBR_FAIL 0x0816 define VSCE_FAR_GAIN_CALIBR_FAIL 0x0817 define VSCE_TRACK0_SEEK_FAIL 0x0818 define VSCE_RC_SERVO_GAIN_CALIBR_FAIL 0x0819 define VSCE_RC_LTR_OL_CALIBR_FAIL 0x081A define VSCE_SNAPSHOT_GAIN_CALIBR_FAIL 0x081B define VSCE_TANG_HD_OFFSET_CALIBR_FAIL 0x081C define VSCE_BANDWIDTH_CALIBR_FAIL 0x081D define VSCE_RRO_LEARNING_OVERFLOW 0x081E define VSCE_RRO_LEARNING 0x081F define VSCE_RESERVED_FOR_SERVO_USE_END 0x09FF define VSCE_DRVPROT_DISK_ERROR_DRVPROVL 0x1004 define VSCE_DRVPROT_DISK_ERROR_DRVPROT1 0x1005 define VSCE_DRVPROT_DISK_ERROR_CFGSEC 0x1007 define VSCE_DRVPROT_CMD_ERROR_INVALID_CRC_CHKSUM 0x2024 define VSCE_DRVPROT_CMD_ERROR_INVALID_OPCODE 0x2025 define VSCE_DRVPROT_CMD_ERROR_KEYS_ALREADY_LOADED 0x2026 define VSCE_DRVPROT_CMD_ERROR_LOAD_ZERO_KEY 0x2027 define VSCE_DRVPROT_CMD_ERROR_INVALID_CONDITIONS 0x2028 define VSCE_DRVPROT_CMD_ERROR_INVALID_SUB_OPCODE 0x2029 define VSCE_DRVPROT_CMD_ERROR_INVALID_CUST_CONFIG 0x202A define VSCE_DRVPROT_DRIVE_IS_UNLOCKED 0x202B define VSCE_DRVPROT_DRIVE_IS_LOCKED 0x202C define VSCE_DRVPROT_ENCRYPTION_KEYS_NOT_LOADED 0x202D define VSCE_DRVPROT_DATA_SHOULD_NOT_BE_ENCRYPTED 0x202E define VSCE_DRVPROT_DATA_SHOULD_BE_ENCRYPTED 0x202F define VSCE_DRVPROT_CMD_ERROR_SET_ZERO_PASSWORD 0x2030 define VSCE_DRVPROT_LOCK_PREPARE_NOT_SET 0x2031 define VSCE_DRVPROT_CHANGE_KEY_WHILE_IN_LOCK_CNTDOWN 0x2032 define VSCE_DRVPROT_MISMATCH_HRN 0x2033 define VSCE_DRVPROT_MISMATCH_DRN 0x2034 define VSCE_DRVPROT_MISMATCH_PASSWORD 0x2035 define VSCE_DRVPROT_NO_HRN_OR_DRN_WAS_ISSUED 0x2036 define VSCE_DRVPROT_NO_PASSWORD_SET_IN_DRIVE 0x2037 define VSCE_DRVPROT_SET_PASSWORD_WHILE_LOCKCOUNTDOWN 0x2038 define VSCE_DRVPROT_LOCK_FAIL_UPD_CONFIG_OR_FLUSH_ERR 0x2039 define VSCE_VSC_MODE_DISABLED 0x3016 define VSCE_CONFIG_WRITE_FAILED 0x3037 define VSCE_CLEAR_DRM_SECTION_FAILED 0x3039 define VSCE_SET_CONFIG_LBA_FAILED 0x303A define VSCE_FORMAT_SET_FAILED 0x303B define VSCE_ERROR_RATE_TBL_NOT_PRESENT 0x303D define VSCE_IBI_MODE_BIT_NOT_SET 0x303E define VSCE_PERM_OVL_ALREADY_LOADED 0x3041 define VSCE_PERM_OVL_NOT_LOADED 0x3042 define VSCE_INVALID_DRM_GROUP_SECTION 0x3044 define VSCE_INVALID_DRM_GROUP_QSUBSECTION 0x3045 define VSCE_DRM_GROUP_QUEUE_EMPTY 0x3046 define VSCE_INVALID_DRM_GROUP_LSUBSECTION 0x3047 define VSCE_INVALID_DRM_SUBSECTION 0x3048 define VSCE_INVALID_LIFE_QUEUE_FLAG 0x3049 define VSCE_PROTOCOL_VIOLATION 0x304A define VSCE_DEPOP_DISABLED 0x304B define VSCE_DEPOP_INVALID_APB 0x304C define LAST_BKGRND_VSC_CMD_FAILED_SEE_SECNDRY_ERR_CODE_FOR_EXT_ERR 0x3059 define VSCE_ODTAA_NOT_INITD 0x3208 define VSCE_TLIST_DATA_NOT_AVAIL 0x3209 define VSCE_ODTAA_RD_WDG_ERR 0x320C define VSCE_RRO_NOT_INITD 0x320E define VSCE_DRM_SPN_COUNTERS_READ_FAIL 0x3219 define VSCE_DRM_ACT_COUNTERS_READ_FAIL 0x321A define VSCE_STATIC_FILE_INVALID 0x321B define VSCE_MRM_REQUEST_FAILED 0x321C define VSCE_MRM_REQUEST_TIMED_OUT 0x321D define VSCE_MRM_REQUEST_REJECTED 0x321E define VSCE_MRM_REQUEST_CANCELED 0x321F define VSCE_MRM_START_CANCELED 0x3220 define VSCE_MRM_WAIT_CANCELED 0x3221 define VSCE_RESOURCE_ALLOCATION_FAILED 0x3222 define VSCE_DRM_LOG_NOT_LOADED 0x3223 define VSCE_DFH_CALIBRATION_FAILED 0x3224 define VSCE_DRM_LOG_SECTIONS_BAD_CHECKSUM 0x3225 define VSCE_DRM_LOG_PERIOD_LOG_BAD_CHECKSUM 0x3232 define SMART_READ_SELF_TEST_LOG_ERR 0x3300 define SMART_DRM_LOG_HAS_NOT_BEEN_LOADED 0x3301 define SMART_DRM_LOAD_DISABLED 0x3307 define CA_FLUSH_CACHEDRELO_GOT_DISK_ERROR 0x3502 define CA_CANT_INVALIDATE_SD_IN_DYNAMIC_STATE 0x3503 define RSC_ALLOCATION_SECTORS_BEYOND_RANGE 0x3600 define RSC_ALLOCATION_GOT_DISK_ERROR 0x3602 define RSC_ALLOCATION_NO_CONTI_BUFFER 0x3603 define RSC_ALLOCATE_TRANSIENT_WITH_CACHE_VALID 0x3604 define RSC_ALLOCATE_TRANSIENT_BUFFER_USED 0x3605 define RSC_ALLOCATE_SD_NO_SD 0x3606 define RSC_ALLOCATION_NO_BUFFERS_AVAIL 0x3607 define RSC_ALLOCATION_GOT_DISK_ERROR_DBS 0x3608 define FM_ERR_FILE_INFO 0x3700 define FM_ERR_DIR 0x3701 define FM_ERR_FILE_ID 0x3702 define FM_ERR_CHECKSUM 0x3703 define FM_ERR_COMPAT 0x3704 define FM_ERR_TIMEOUT 0x3705 define FM_ERR_NOT_STATIC_FILE 0x3706 define FM_ERR_NO_BUFFER 0x3707 define FM_ERR_DRIVE_NOT_READY 0x3708 define FM_ERR_FILEHDR_FILESIZE_ZERO 0x3709 define FM_ERR_INCOMPATIBLE_VERSION 0x370A define FM_ERR_NOT_FLASH_FILE 0x370C define FM_CANT_RENAME_TO_EXISTING_FILE_ID 0x370D define FM_ERR_FILES_GOOD_BUT_CHECKSUMS_DIFFERENT 0x370E define FM_ERR_HEADER_II_SIGNATURE_INVALID 0x370F define FM_ERR_HEADER_II_TOO_SMALL 0x3710 define FM_ERR_PARTIAL_FILE_REQUEST_INVALID 0x3711 define FM_SECTOR_COUNT_EXCEEDS_MAX_ALLOCATED_BUFFER 0x3712 define FM_ERR_FILE_SIZE_EXCEEDS_STATIC_BUFFER_SIZE 0x3713 define FM_ERR_PARTIAL_FILE_BUF_OFFSET_EXCEEDS_EOF 0x3714 define FM_ERR_PARTIAL_FILE_SEC_COUNT_EXCEEDS_EOF 0x3715 define FM_ERR_NO_SD_CREATED_FOR_THE_REQUESTED_FILE_ID 0x3716 define FM_NO_MORE_SPACE_IN_DIR 0x3717 define FM_NUM_COPY_MORE_THEN_MAX_COPY 0x3718 define FM_NO_MORE_SPACE_IN_REGION 0x3719 define FM_FILE_CANNOT_CREATE_ON_EXISTING_FILE 0x3720 define FM_ERR_FILE_ENTRY_NUM_NOT_FOUND_IN_DIRSEC 0x3721 define FM_ERR_TRYING_TO_COPY_TO_SAME_REGION 0x3722 define FM_ERR_FILE_INIT_PLACEHOLDER_BIT_NOT_SET 0x3723 define FM_ERR_FILE_TARGET_RLBA_OVERLAP 0x3724 define FM_ERR_NO_CONTIGUOUS_SPACE_IN_REGION 0x3725 define FM_ERR_CANNOT_RESOLVE_OVERLAP 0x3726 define FM_ERR_CANNOT_FREE_ENOUGH_SPACE 0x3727 define FM_ERR_CANNOT_CREATE_CONTIGUOS_SPACE_IN_REGION 0x3728 define FM_ERR_REQUESTRLBA_EXCEED_REGION_DOUNDARY 0x3729 define FM_ERR_DIRECTORY_ENTRY_NOT_SAME 0x3730 define FM_ERR_DEFRAG_DETECT_PKT_FILE_IN_RSVD 0x3731 define FM_ERR_GATHER_FIELD_FILE 0x3732 define FM_ERR_SORT_DIR_SECTOR 0x3733 define FM_ERR_DEFRAG_RSVD 0x3734 define BG_ERR_PST_ABORTED_BY_RESET 0x3801 define BG_ERR_PST_ABORTED_BY_DEADMAN 0x3802 define BG_ERR_INVALID_ASCAN_CFGPARMS 0x3803 define BG_TLIST_DATA_NOT_AVAIL 0x3804 define BG_PST_UNABLE_TO_LOAD_PTM 0x3805 define BG_PST_RSC_ALLOCATION_FAILED 0x3806 define BG_PST_DISABLED_VIA_DEBUGSTOP 0x3807 define BG_ERR_BACKGROUND_DISABLED 0x3809 define BG_PST_INVALID_PTM_LOAD_ADDRESS 0x380A define BG_PST_INVALID_PTM_START_ADDRESS 0x380B define BG_ERR_NONCAPTIVE_MEMORY_TEST_NOT_ALLOWED 0x380C define BG_PST_UNABLE_TO_FLASH_PTM 0x380D define BG_ERR_SELFTEST_ABORTED_TIMEDOUT 0x380E define OVM_PERMANENT_ALREADY_LOADED 0x3900 define OVM_TRANSIENT_ALREADY_LOADED 0x3901 define OVM_PERMANENT_NOT_LOADED 0x3902 define OVM_TRANSIENT_NOT_LOADED 0x3903 define OVM_ERR_NOT_COMPATIBLE 0x3904 define OVM_ERR_CHECKSUM 0x3905 define OVM_UNDEFINED_FN 0x3906 define OVM_ERR_BUILDID_MISMATCH 0x3907 define FLASH_UNKNOWN_ERROR 0x3A00 define FLASH_INVALID_FLASH_SECTOR_ADDRESS 0x3A01 define FLASH_WRITE_LATCH_ENABLE_ERROR 0x3A02 define FLASH_WRITE_PAGE_SEND_BYTE_ERROR 0x3A03 define FLASH_WRITE_PAGE_TIMEOUT 0x3A04 define FLASH_WRITE_PAGE_TO_SMEM_ERROR 0x3A05 define FLASH_READ_BLOCK_GET_BYTE_ERROR 0x3A06 define FLASH_BYTE_COUNT_EXCEEDS_DEVICE_LIMIT 0x3A07 define FLASH_INVALID_FLASH_ADDRESS 0x3A08 define FLASH_INITIAL_BOOT_HEADER_MISSING 0x3A09 define FLASH_SEND_BYTE_TIMEOUT 0x3A0A define FLASH_READ_CMD_ERROR 0x3A0B define FLASH_INVALID_FLASH_DATA 0x3A0C define FLASH_DATA_COMPARE_ERROR 0x3A0D define FLASH_DEVICE_ID_ERROR 0x3A0E define FLASH_READ_INFO_START_TIMEOUT 0x3A0F define FLASH_STATUS_TIMEOUT 0x3A10 define FLASH_COMMAND_TIMEOUT 0x3A11 define DPTM_MALLOC_FAILURE 0x3A20 define DPTM_FREE_FAILURE 0x3A21 define DPTM_INITIALIZATION_FAILURE 0x3A22 define DPTM_FAILED_TO_PROCESS_DOWNLOADED_PACKET 0x3A23 define DPTM_FAILED_TO_BACK_UP_FLASH_FILES 0x3A24 define DPTM_PRESERVED_FILE_HAS_DIFF_VERSION_OR_SIZE 0x3A25 define DPTM_UNHANDLED_FILELIST_EXCEPTION 0x3A26 define DPTM_FILE_ID_NOT_IN_FILE_LIST 0x3A27 define DPTM_FLASH_WRITE_BUFFER_INVALID 0x3A28 define DPTM_FLASH_IMAGE_TOO_BIG 0x3A29 define DPTM_FLASH_PROGRAM_FAILURE 0x3A2A define DPTM_FAILED_TO_VERIFY_PROGRAMMED_FLASH 0x3A2B define DPTM_FAILED_TO_APPLY_MOD_BYTES 0x3A2C define DPTM_CLEANUP_FAILURE 0x3A2D define DPTM_FAILED_TO_WRITE_CFG 0x3A2E define RSEEK_MALLOC_FAILURE 0x3A60 define RSEEK_FREE_FAILURE 0x3A61 define SELFTEST_CHECK_RES_FILE_ERROR 0x3B00 define SELFTEST_SCAN_ERROR 0x3B01 define SELFTEST_SRAM_HARD_ERROR 0x3B02 define SELFTEST_SRAM_SOFT_ERROR 0x3B03 define SELFTEST_SRAM_MULTISOFT_ERROR 0x3B04 define SELFTEST_DRAM_HARD_ERROR 0x3B05 define SELFTEST_DRAM_SOFT_ERROR 0x3B06 define SELFTEST_DRAM_MULTISOFT_ERROR 0x3B07 define SELFTEST_TRANSIENT_LOAD_FAULT 0x3B08 define FMT_ERR_PLIST_NOT_FOUND 0x3C00 define FMT_ERR_INVALID_PLIST 0x3C01 define FMT_ERR_GLIST_NOT_FOUND 0x3C02 define FMT_ERR_INVALID_GLIST 0x3C03 define FMT_ERR_EXCEEDED_PUSH_DOWNS 0x3C04 define FMT_ERR_PDLIST_WRT_FAIL 0x3C05 define FMT_ERR_NEW_BAD_TRKS 0x3C06 define FMT_ERR_FRMT_FAILURE 0x3C07 define FMT_ERR_EXCEEDED_GLIST 0x3C08 define FMT_ERR_GLIST_WRT_FAIL 0x3C09 define FMT_ERR_CAPACITY 0x3C0A define FMT_ERR_ZSD_NOT_LOADED 0x3C0B define FMT_ERR_BUF_ALLOCATION 0x3C0C define FMT_ERR_RELOLIST_WRT_FAIL 0x3C0D define FMT_ERR_PDLIST_NOT_FOUND 0x3C0E define FMT_ERR_RELOLIST_NOT_FOUND 0x3C0F define FMT_ERR_EXCEEDED_RELOLIST 0x3C10 define FMT_ERR_WRT_FAIL 0x3C11 define FMT_ERR_EXCEEDED_RPDLIST 0x3C12 define FMT_ERR_RPDLIST_WRT_FAIL 0x3C13 define FMT_ERR_RPDLIST_NOT_LOADED 0x3C14 define FMT_PLIST_PSN_OUT_OF_RANGE 0x3C15 define FMT_PUSHCOUNT_OVERFLOW 0x3C16 define FMT_HASH_TABLE_OVERFLOW 0x3C17 define FMT_ERR_INVALID_ZONE_TABLE 0x3C18 define FMT_ERR_CANT_MERGE_PGLIST 0x3C19 define FMT_ERR_PLIST_WRT_FAIL 0x3C1A define FMT_ERR_SLIPS_EXCEED_LIMIT 0x3C1B define FMT_ERR_TRACK_PUSHED_DOWN 0x3C1C define FMT_ERR_FLIST_WRT_FAIL 0x3C1D define FMT_PLIST_CYLINDER_OUT_OF_RANGE 0x3C1E define FMT_PLIST_HEAD_OUT_OF_RANGE 0x3C1F define FMT_ERR_REMERGE_REQUIRED 0x3C20 define DFL_DFCTFND 0x3D80 define DFL_NODEFECT 0x3D81 define DFL_TRKDFCTFND 0x3D82 define DFL_EMPTY 0x3D83 define DFL_NOMEM 0x3D84 define DFL_PLWRERR 0x3D85 define DFL_GLWRERR 0x3D86 define DFL_PDLWRERR 0x3D87 define DFL_RELOLWRERR 0x3D89 define DFL_GLFULL 0x3D8A define DFL_PLFULL 0x3D8B define DFL_CLFULL 0x3D8C define DFL_PLDEFECT 0x3D8D define DFL_GLDEFECT 0x3D8E define DFL_NOLIST 0x3D8F define DFL_DEF1_LT 0x3D90 define DFL_DEF1_GT 0x3D91 define DFL_DEF1_EQ 0x3D92 define DFL_INVALIDLBA 0x3D93 define DFL_INVALIDLBARANGE 0x3D94 define DFL_DUPLICATEDEFECT 0x3D95 define DFL_DLFULL 0x3D96 define CACHE_RELO_SPARE_RW_TIMEOUT 0x3E00 define CACHE_RELO_INSUFFICIENT_CACHE_SPACE 0x3E01 define CACHE_RELO_READ_RELO_DOES_NOT_EXIST 0x3E02 define CACHE_RELO_WRITE_RELO_DOES_NOT_EXIST 0x3E03 define CACHE_RELO_READ_NEW_RELO_FAILURE 0x3E04 define CACHE_RELO_LOAD_TRACK_CACHE_FAILURE 0x3E05 define CACHE_RELO_RW_IN_PROGRESS 0x3E06 define DM_TRANSLATION_OUT_OF_RANGE 0x3F00 define DM_SECTOR_OUT_OF_RANGE 0x3F01 define DM_RM_NOT_A_SPARE_RELO 0x3F02 define DM_RM_NOT_A_SPARE_LBA 0x3F03 define DM_RM_NOT_A_RELOLIST_ENTRY 0x3F04 define DM_RM_NOT_A_USER_LBA 0x3F05 define DM_RM_INSERTING_IN_FULL_RELOLIST 0x3F06 define DM_RM_INSERTING_AN_EXISTING_LBA 0x3F07 define DM_HEAD_CHK_WRONG_CYL_FOR_RSVD_AREA 0x3F08 define DM_HEAD_CHK_WRONG_HEAD_FOR_USER_AREA 0x3F09 define DM_RM_NO_MORE_SPARES_FOR_CACHE_RELO 0x3F0A define FMT_RSVD_ERROR_RPDLIST_OVERFLOW 0x4080 define FMT_RSVD_ERROR_RPLIST_PSN_OUT_OF_RANGE 0x4081 define FMT_RSVD_ERROR_RPLIST_FILE_ID_INVALID 0x4082 define FMT_RSVD_HASH_BLOCK_EMPTY 0x4083 define FMT_RSVD_ERROR_HEAD_COUNT_ZERO 0x4084 define FMT_RSVD_ERROR_ZONE_TABLE_SPT_ZERO 0x4085 define FMT_RSVD_ERROR_NO_SPARES_AVAILABLE 0x4086 define FMT_RSVD_REGION_CROSSES_HEAD_BOUNDARY 0x4087 define FMT_RSVD_REGION_TOO_LARGE 0x4088 define FMT_RSVD_TWO_REGION_ON_SAME_VIRT_HEAD 0x4089 define MEMORY_TEST_DATA_BUS_ERROR 0x4100 define MEMORY_TEST_ADDRESS_BUS_ERROR 0x4101 define MEMORY_TEST_DEVICE_BUS_ERROR 0x4102 define HOST_DLMC_BAD_COMP_CHAR 0x4506 define HOST_DLMC_INVALID_PACKET 0x4509 define HOST_DLMC_INVALID_PROD_FAMILY 0x450C define HOST_DLMC_INVALID_TPI_CODE 0x451E define HOST_DLMC_INVALID_SECTION_OFFSET 0x4520 define HOST_DLMC_INVALID_CUST_ID 0x4524 define HOST_DLMC_TOTAL_XFERRED_TOO_LARGE 0x4525 define HOST_DLMC_ERROR_SAVING_DRV_STATE 0x4526 define HOST_DLMC_XFER_SIZE_OUT_OF_RANGE 0x4527 define HOST_LATCHED_FATAL_WRITE_FAULT 0x4580 define HOST_RESIDENT_FILES_NOT_LOADED 0x4582 define HOST_DEBUGSTOP_OCCURRED 0x4583 define HOST_DOWNLOAD_MICRCODE_ERROR 0x4584 define HOST_DOWNLOAD_MICRCODE_NO_SD 0x4585 define HOST_CACHE_OVERLAY_NOT_LOADED 0x4587 define HOST_DOWNLOAD_MICRCODE_NO_PTM_CODE 0x4588 define HOST_ABORTED_CMD 0x4612 define HOST_XFER_CANCEL_ERROR 0x4630 define CACHE_FLUSH_FAILURE1 0x4700 define CACHE_FLUSH_FAILURE2 0x4701 define COMMAND_TIMEOUT_ERROR 0x4900 define COMMAND_TIMEOUT_AV_CCTO_ERROR 0x4901 define COMMAND_TIMEOUT_SA_STREAMING_ERROR 0x4902 define COMMAND_TIMEOUT_TLER_ERROR 0x4903 define COMMAND_TIMEOUT_RD_TLER_ERROR 0x4904 define COMMAND_TIMEOUT_WR_TLER_ERROR 0x4905 define DISK_NON_ERROR_STATUS_RANGE_RSVD 0x5100 define DISK_ECC_CORRECTED 0x5101 define DISK_TA_DET_STATUS 0x5102 define DISK_TA_2ND_SYNC_MARK_ERROR 0x5103 define DISK_UNSAFE_2ND_SYNC_MARK_ERROR 0x5104 define DISK_ERROR_DRM_LOG_RANGE_RSVD 0x5120 define DISK_FIFO_OVER_UNDER 0x5122 define DISK_FIFO_OVER_RUN 0x5123 define DISK_FIFO_UNDER_RUN 0x5124 define DISK_SEC_PULSE_RG_ERROR 0x5125 define DISK_SEC_PULSE_WG_ERROR 0x5126 define DISK_ECC_DATA_SIZE_ERROR 0x5127 define DISK_RG_OVER_SERVO_ERROR 0x5128 define DISK_DAM_ERROR_RANGE_RSVD 0x5180 define DISK_DAM_ERROR 0x5181 define DISK_DAM_TA_ERROR 0x5182 define DISK_SEC_PULSE_RG_ERROR_RECOVER 0x5183 define DISK_ECC_DATA_SIZE_ERROR_RECOVER 0x5184 define DISK_RG_OVER_SERVO_ERROR_RECOVER 0x5185 define DISK_SPBA_ERROR_RANGE_RSVD 0x5190 define DISK_SPBA_ERROR 0x5191 define DISK_TIMEOUT_SEC_NOTFOUND_ERROR 0x5192 define DISK_ECC_ERROR_RANGE_RSVD 0x51A0 define DISK_CRC_ERROR 0x51A1 define DISK_ECU_UNSAFE_ERROR 0x51A2 define DISK_ECU_UNSAFE_TA_ERROR 0x51A3 define DISK_WRITE_ERROR_RANGE_RSVD 0x51C0 define DISK_WRITE_ERROR 0x51C1 define DISK_TIMEOUT_ERROR_RANGE_RSVD 0x51E0 define DISK_TIMEOUT_DM_NOT_ACTIVE_ERROR 0x51E2 define DISK_TIMEOUT_DM_NOT_ACTIVE_ERROR_RD 0x51E3 define DISK_TIMEOUT_DM_NOT_ACTIVE_ERROR_WRT 0x51E4 define DISK_TIMEOUT_BUFFER_NOT_READY_ERROR 0x51E5 define DISK_TIMEOUT_DF_ERROR 0x51E6 define DISK_GENERAL_ERROR 0x51E7 define DISK_TIMEOUT_TLER_ERROR 0x51E8 define DISK_EVENT_TIMEOUT_DF_ERROR 0x51E9 define DISK_BUFFER_FULL_ERROR 0x51EA define DISK_not_used_error_5200 0x5200 define DISK_not_used_error_5201 0x5201 define DISK_not_used_error_5203 0x5203 define DISK_ER_FWECC_FAILURE 0x5204 define DISK_not_used_error_5205 0x5205 define DISK_not_used_error_5206 0x5206 define DISK_not_used_error_5207 0x5207 define DISK_not_used_error_5208 0x5208 define DISK_not_used_error_5209 0x5209 define DISK_RECAL_FAILURE 0x521A define DISK_not_used_error_521B 0x521B define TONESCAN_DEFECT_BUFFER_OVERFLOW_ERROR 0x521C define DISK_WEDGE_COMMAND_IN_PROGRESS 0x521D define DISK_SPINUP_TIMEOUT1 0x521E define DISK_SPINUP_TIMEOUT2 0x521F define DISK_WEDGE_INVALID_WEDGE_COUNT 0x5220 define DISK_RELO_PERM_OVL_NOT_LOADED 0x5221 define RELO_SST_FAILED 0x5230 define RELO_NOT_POSSIBLE_ON_SPARE 0x5231 define RELO_INVALID_REQUEST_COUNT 0x5232 define RELO_NOT_POSSIBLE_ON_RSVD 0x5233 define DISK_STOP_ON_CREATE_RELO 0x5234 define DISK_STOP_ON_CREATE_TARE 0x5235 define RELO_DISABLED 0x5236 define RELO_DISABLED_YOU_DIDNT_RUN_FMTUNIT 0x5237 define RELO_IN_POST_READ_CANCELLED 0x5238 define RELO_LAST_LBA_IN_USER_AREA 0x5239 define RELO_DISABLED_NOT_INITED 0x523A define RELO_EC_SPARE_LBA_WITH_NO_USER_LBA 0x523B define PM_ILLEGAL_MODE_TRANSITION 0x5240 define PM_TRANSITION_NOT_NEEDED_OK 0x5241 define DISK_not_used_error_5250 0x5250 define DISK_CHANNEL_HEAD_SIZE_INIT_ERROR 0x5251 define DISK_SERVO_ERROR 0x5380 define DISK_SERVO_NOT_READY_ERROR 0x5381 define DISK_SERVO_SPINDLE_ERROR 0x53A0 define DISK_SERVO_SPINDLE_SPINUP_ERROR 0x53A1 define DISK_SERVO_SPINDLE_SPINDOWN_ERROR 0x53A2 define DISK_SERVO_SPINDLE_OFF_SPEED_ERROR 0x53A3 define DISK_SERVO_SPINDLE_SPINUP_FATAL_ERROR 0x53A4 define DISK_SERVO_SPINDLE_GET_SPINUP_TIME_ERROR 0x53A5 define DISK_SERVO_ACTUATOR_ERROR 0x53C0 define DISK_SERVO_ACTUATOR_DRV_FLT_ERROR 0x53C1 define DISK_SERVO_ACTUATOR_ABORT_ERROR 0x53C2 define DISK_SERVO_ACTUATOR_WRT_INH_ERROR 0x53C3 define DISK_SERVO_ACTUATOR_CTRL_FLT_ERROR 0x53C4 define DISK_SERVO_ACTUATOR_SHOCK_FLT_ERROR 0x53C5 define DISK_SERVO_ACTUATOR_WR_UNSAFE_ERROR 0x53C6 define DISK_SERVO_ACTUATOR_SRV_FLT_ERROR 0x53C7 define DISK_SERVO_ACTUATOR_WG_MASK_ERROR 0x53C8 define DISK_SERVO_ACTUATOR_FATAL_ERROR 0x53C9 define DISK_SERVO_ACTUATOR_TIMEOUT_ERROR 0x53CA define DISK_SERVO_ACTUATOR_SAIL_ERROR 0x53CB define DISK_SERVO_ACTUATOR_BAD_WEDGE_ERROR 0x53CC define DISK_SERVO_ACTUATOR_NO_SC_TARGET_WEDGE_ERROR 0x53CD define DISK_SERVO_ACTUATOR_SPLIT_EN_TIMEOUT_ERROR 0x53CE define DISK_SERVO_ACTUATOR_TBG_UNLOCK_DET 0x53CF define DISK_SERVO_WRT_FLT_WRITE_UNSAFE_ERROR 0x53D1 define DISK_SERVO_WRT_FLT_SPINDLE_AT_SPEED_ERROR 0x53D2 define DISK_SERVO_WRT_FLT_SSM_TIMEOUT_ERROR 0x53D3 define DISK_SERVO_WRT_FLT_ILLEGAL_GRAY_CODE__ERROR 0x53D4 define DISK_SERVO_WRT_FLT_ILLEGAL_CYL_ERROR 0x53D5 define DISK_SERVO_WRT_FLT_OFFTRACK_ERROR 0x53D6 define DISK_SERVO_WRT_FLT_FATAL_ERROR_PATH_SERVO_DEAD 0x53D7 define DISK_SERVO_WRT_FLT_READ_OFFTRACK_ERROR 0x53D8 define DISK_SERVO_WRT_FLT_TONESCAN_SSM_TIMEOUT_ERROR 0x53D9 define DISK_SERVO_ERROR_REQUIRES_ACT_INIT 0x53E0 define DISK_SERVO_ACTUATOR_AI_NO_SC_TARGET_WEDGE_ERROR 0x53E1 define DISK_SERVO_ACTUATOR_AI_TIMEOUT_ERROR 0x53E2 define DISK_SERVO_ACTUATOR_AI_BAD_WEDGE_ERROR 0x53E3 define DISK_SERVO_ACTUATOR_AI_FATAL_ERROR 0x53E4 define DISK_SERVO_WRT_FLT_AI_WRITE_UNSAFE_ERROR 0x53F1 define DISK_SERVO_WRT_FLT_AI_SPINDLE_AT_SPEED_ERROR 0x53F2 define DISK_SERVO_WRT_FLT_AI_SSM_TIMEOUT_ERROR 0x53F3 define DISK_SERVO_WRT_FLT_AI_ILLEGAL_GRAY_CODE__ERROR 0x53F4 define DISK_SERVO_WRT_FLT_AI_ILLEGAL_CYL_ERROR 0x53F5 define DISK_SERVO_WRT_FLT_AI_OFFTRACK_ERROR 0x53F6 define DISK_SERVO_WRT_FLT_AI_FATAL_ERROR_PATH_SERVO_DEAD 0x53F7 define DISK_SERVO_WRT_FLT_AI_READ_OFFTRACK_ERROR 0x53F8 define SERVO_ERROR_CODE_BASE_SvirOk 0x5400 define SERVO_ERROR_CODE_BASE_SvirAbort 0x5401 define SERVO_ERROR_CODE_BASE_SvirModel 0x5402 define SERVO_ERROR_CODE_BASE_SvirHed 0x5410 define SERVO_ERROR_CODE_BASE_SvirCyl 0x5411 define SERVO_ERROR_CODE_BASE_SvirParm1 0x5412 define SERVO_ERROR_CODE_BASE_SvirParm2 0x5413 define SERVO_ERROR_CODE_BASE_SvirParm3 0x5414 define SERVO_ERROR_CODE_BASE_SVIR_LENGTH 0x5416 define SERVO_ERROR_CODE_BASE_SVIR_SUBCMD 0x5416 define SERVO_ERROR_CODE_BASE_SvirCmnd 0x5418 define SERVO_ERROR_CODE_BASE_SvirErr 0x5420 define SERVO_ERROR_CODE_BASE_SvirTo 0x5421 define SERVO_ERROR_CODE_BASE_SvirIndx 0x5422 define SERVO_ERROR_CODE_BASE_SvirSect 0x5423 define SERVO_ERROR_CODE_BASE_SvirSAMErr 0x5424 define SERVO_ERROR_CODE_BASE_SvirWRROOnTk2Lrn 0x5426 define SERVO_ERROR_CODE_BASE_SvirWRROOnTk2Wrt 0x5427 define SERVO_ERROR_CODE_BASE_SvirWRROCalibLrn 0x5428 define SERVO_ERROR_CODE_BASE_SvirWRROBrstErr 0x5429 define SERVO_ERROR_CODE_BASE_SvirWRRORdLimLrn 0x542a define SERVO_ERROR_CODE_BASE_SvirWRROJogLrnErr 0x542b define SERVO_ERROR_CODE_BASE_SvirWRROWriteErr 0x542c define SERVO_ERROR_CODE_BASE_SvirWRROSetupErr 0x542d define SERVO_ERROR_CODE_BASE_SvirWRROTroLimLrn 0x542e define SERVO_ERROR_CODE_BASE_SvirSpinUp 0x5430 define SERVO_ERROR_CODE_BASE_SvirSpinDown 0x5431 define SERVO_ERROR_CODE_BASE_SvirActSpeed 0x5440 define SERVO_ERROR_CODE_BASE_SvirActSync 0x5441 define SERVO_ERROR_CODE_BASE_SvirActUnlat 0x5442 define SERVO_ERROR_CODE_BASE_SvirActPdFail 0x5443 define SERVO_ERROR_CODE_BASE_SVIRDRVNOTCAL 0x5444 define SERVO_ERROR_CODE_BASE_SvirWRROLoadErr 0x5447 define SERVO_ERROR_CODE_BASE_SvirWRROCmpErr 0x5449 define SERVO_ERROR_CODE_BASE_SvirCalNorm 0x5450 define SERVO_ERROR_CODE_BASE_SvirCalFlex 0x5458 define SERVO_ERROR_CODE_BASE_SvirCalMotor 0x5459 define SERVO_ERROR_CODE_BASE_SvirCalRRO 0x545a define SERVO_ERROR_CODE_BASE_SvirCalFGain 0x545b define SERVO_ERROR_CODE_BASE_SvirCalSeek 0x545c define SERVO_ERROR_CODE_BASE_SvirCalApGain 0x545d define SERVO_ERROR_CODE_BASE_SvirCalLTR 0x545e define SERVO_ERROR_CODE_BASE_SvirCalGainS 0x545f define SERVO_ERROR_CODE_BASE_SvirCalTangHO 0x5460 define SERVO_ERROR_CODE_BASE_SvirCalBW 0x5461 define SERVO_ERROR_CODE_BASE_SvirRROOvf 0x5470 define SERVO_ERROR_CODE_BASE_SvirRROAlg 0x5471 define SERVO_ERROR_CODE_BASE_SvirRampLUL 0x5472 define SERVO_ERROR_CODE_BASE_SvirLatchHang 0x5473 define SERVO_ERROR_CODE_BASE_SvirLoad2Fast 0x5474 define SERVO_ERROR_CODE_BASE_SvirLoad2Slow 0x5475 define SERVO_ERROR_CODE_BASE_SvirIRcalib 0x5476 define SERVO_ERROR_CODE_BASE_SvirADChang 0x5477 define SERVO_ERROR_CODE_BASE_SvirRampCalRange 0x5478 define SERVO_ERROR_CODE_BASE_SvirCalRRO_Hd0 0x5480 define SERVO_ERROR_CODE_BASE_SvirCalRRO_Hd1 0x5481 define SERVO_ERROR_CODE_BASE_SvirCalRRO_Hd2 0x5482 define SERVO_ERROR_CODE_BASE_SvirCalRRO_Hd3 0x5483 define SERVO_ERROR_CODE_BASE_SvirCalRRO_Hd4 0x5484 define SERVO_ERROR_CODE_BASE_SvirCalRRO_Hd5 0x5485 define SERVO_ERROR_CODE_BASE_SvirCalRRO_Hd6 0x5486 define SERVO_ERROR_CODE_BASE_SvirCalRRO_Hd7 0x5487 define SERVO_ERROR_CODE_BASE_SvirSTraceFile 0x5490 define SIO_INVALID_SD_INDEX 0x5500 define SIO_INVALID_BUFF_PTR 0x5501 define SIO_ERR_TIMEOUT 0x5502 define SPP_ERR_DEVICE_INIT 0x5503 define SIO_INV_PARAM 0x5504 define SIO_INV_XFER_CMD_HDR_CHECKSUM 0x5505 define SIO_ERR_INV_CMD_FUNCTION 0x5506 define SIO_INV_CRC 0x5507 define SIO_UNKNOWN_ERR 0x5508 define SIO_ERR_XFER_REQ_GT_AVAIL_DATA 0x5509 define SIO_ERR_ACK_SIZE_REQ_GT_XFER_LEN_REQ 0x550A define SIO_ERR_XFER_ABORT_REQUEST 0x550B define SIO_ERR_TIMEOUT_XMIT_ISR 0x550C define SIO_ERR_TIMEOUT_XMIT_DATA 0x550D define SIO_ERR_TIMEOUT_RECV_ISR 0x550E define SIO_ERR_TIMEOUT_XFER_REQ 0x550F define SIO_PROT_ERR_CMD_NOT_EXPCTD 0x5510 define SIO_INV_TRANSFER_PAYLOAD_LEN 0x5511 define SIO_INV_TRANSFER_LENGTH 0x5512 define SIO_ERR_NO_DATA_TRANSFER_IN_PROG 0x5513 define SIO_ERR_XFER_CMD_ACK_SIZE 0x5514 define SIO_ERR_INV_ABN_NUMBER 0x5515 define SIO_ERR_MAX_CRC_ERRS_RECV_DATA 0x5516 define SIO_ERR_CRC_ERR_RECVED_RETRY_SENT 0x5517 define SIO_ERR_MAX_RETRIES 0x5518 define SIO_INV_XFER_CMD_PAYLOAD_LEN 0x5519 define SIO_ERR_CMD_ABORTED 0x5520 define SIO_ERR_TIMEOUT_WAITING_4_ACK_CMD 0x5521 define SIO_ERR_MAX_CRC_ERRS_NON_SEQ_ABN_RECV_DATA 0x5522 define SIO_ERR_WAITING_4_XFER_COMPLETE 0x5523 define SIO_ERR_INV_CMD_HDR_RESERVE_FIELD 0x5524 define SIO_ERR_INV_XFER_CMD_HDR_PARAM_FIELD 0x5525 define SIO_ERR_INV_XFER_CMD_PAYLOAD_CRC 0x5526 define SIO_ERR_INV_XFER_CMD_DIR_FIELD 0x5527 define SIO_ERR_INV_ACK_CMD_HDR_RESV_FIELD 0x5528 define SIO_ERR_INV_TRNSFR_CMPLTE_CMD_RESV_FIELD 0x5529 define SIO_ERR_INV_RETRY_CMD_RESV_FIELD 0x5530 define SIO_ERR_INV_ACK_CMD_HDR_LEN_FIELD 0x5531 define SIO_ERR_INV_TRNSFR_CMPLTE_CMD_LEN_FIELD 0x5532 define SIO_ERR_INV_RETRY_CMD_LEN_FIELD 0x5533 define SIO_ERR_INV_ACK_CMD_HDR_PARAM_FIELD 0x5534 define SIO_ERR_INV_TRNSFR_CMPLTE_CMD_PARAM_FIELD 0x5535 define SIO_ERR_INV_RETRY_CMD_PARAM_FIELD 0x5536 define SIO_ERR_INV_ACK_CMD_CHKSUM 0x5537 define SIO_ERR_INV_TRANSFER_CMPLTE_CMD_CHKSUM 0x5538 define SIO_ERR_INV_RETRY_CMD_CHKSUM 0x5539 define UART_OTHER_ERROR 0x5540 define UART_OVERRUN_ERROR 0x5541 define UART_FRAMING_ERROR 0x5542 define CANCEL_ERRORS_RANGE 0x6400 define CA_FLUSH_ALL_GOT_CANCELED 0x6401 define CA_FLUSH_CACHEDRELO_GOT_CANCELED 0x6402 define DISK_CANCEL_ERROR 0x6403 define EXEC_OPERATION_CANCELED 0x6404 define RSC_ALLOCATION_GOT_CANCELED 0x6405 define BG_ERR_CANCELLED 0x6406 define CACHE_RELO_OPERATION_CANCELLED 0x6407 define FMT_ERR_FORMAT_UNIT_CANCELLED 0x6408 define FM_ERR_CANCELED 0x6409 define DISK_REMOVE_BY_REQUEST 0x640A define HOST_OPERATION_CANCELED 0x640B define SERVO_PTM_ERROR_CODE_BASE 0x7000 define ERROR_CODE_BASE 0x7100 define ARCO_ERROR_CODE_BASE 0x7200 define SPT_PTM_ERROR_CODE_BASE 0x7300 define CTLR_PTM_ERROR_CODE_BASE 0x7500 define IBI_ERROR_CODE_BASE 0x7600 define COMMON_PTM_ERROR_CODE_BASE 0x7F00 define PTM_ERR_INV_VEC_TBL_VER 0x7F01 define HAL_INVALID_PARAMETER 0x8000 define HAL_FLASH_UNKNOWN_ERROR 0x8020 define HAL_FLASH_INVALID_FLASH_SECTOR_ADDRESS 0x8021 define HAL_FLASH_WRITE_LATCH_ENABLE_ERROR 0x8022 define HAL_FLASH_WRITE_PAGE_SEND_BYTE_ERROR 0x8023 define HAL_FLASH_WRITE_PAGE_TIMEOUT 0x8024 define HAL_FLASH_WRITE_PAGE_TO_SMEM_ERROR 0x8025 define HAL_FLASH_READ_BLOCK_GET_BYTE_ERROR 0x8026 define HAL_FLASH_BYTE_COUNT_EXCEEDS_DEVICE_LIMIT 0x8027 define HAL_FLASH_INVALID_FLASH_ADDRESS 0x8028 define HAL_FLASH_INITIAL_BOOT_HEADER_MISSING 0x8029 define HAL_FLASH_SEND_BYTE_TIMEOUT 0x802A define HAL_FLASH_READ_CMD_ERROR 0x802B define HAL_FLASH_INVALID_FLASH_DATA 0x802C define HAL_FLASH_DATA_COMPARE_ERROR 0x802D define HAL_FLASH_DEVICE_ID_ERROR 0x802E define HAL_FLASH_READ_INFO_START_TIMEOUT 0x802F define HAL_FLASH_STATUS_TIMEOUT 0x8030 define HAL_FLASH_COMMAND_TIMEOUT 0x8031 define HAL_FLASH_BAD_CHECKSUM 0x8032 define HAL_SYS_PLL_LOCK_FAILURE 0x8100 define HAL_SYS_SPP_CHECK_FAIL 0x8101 define HAL_SYS_UART_FIFO_FULL 0x8102 define HAL_SYS_UART_FIFO_EMPTY 0x8103 define HAL_SYS_UART_OVERRUN 0x8104 define HAL_SYS_UART_OTHERS_ERROR 0x8105 define HAL_SYS_UART_XMIT_FIFO_FULL 0x8106 define VSCE_INV_MOD_ACT_CODE_REQ 0xB001 define VSCE_VSC_CMD_SET_NOT_ENABLED 0xB002 define VSCE_INV_MOD_BYTE_IN_MODCFG_SEC_CMD 0xB003 define VSCE_INV_SMART_ENABLE_CODE 0xB004 define VSCE_INV_OP_REQ 0xB005 define VSCE_OFF_TOO_LARGE 0xB006 define VSCE_INV_HEAD_NUM 0xB007 define VSCE_CYL_ABOVE_LIMIT 0xB008 define VSCE_INV_WEDGE_OFF 0xB009 define VSCE_INV_WEDGE_SIZE 0xB00A define VSCE_START_ADDR_TOO_LARGE 0xB00B define VSCE_LGTH_TOO_LARGE 0xB00C define VSCE_INVALID_TBL_ID 0xB00D define VSCE_UNSUP_ACTION_CODE 0xB00E define VSCE_UNSUP_FUNCTION 0xB00F define VSCE_VAL_ACTION_CODE_UNSUP_FEATURE 0xB010 define VSCE_VAL_ACTION_CODE_UNSUP_OP 0xB011 define VSCE_INV_FUNC_CODE_REQ 0xB012 define VSCE_TBL_OFFSET_TOO_LARGE 0xB013 define VSCE_INV_EXCEPTION_FEAT 0xB014 define VSCE_INV_OFFSET 0xB015 define VSCE_INV_KEY_SECTOR_SIZE 0xB017 define VSCE_XFER_REQ_EXCEED_AVAILABLE_DATA 0xB018 define VSCE_INV_VSC_SOURCE 0xB019 define VSCE_ACTION_CODE_OUT_OF_RANGE 0xB01A define VSCE_KEY_SECTOR_MUST_PRECEED_DATA_XFER_REQUEST 0xB01B define VSCE_INVALID_SETTLE_MODE 0xB01C define VSCE_INV_ENABLE_DISABLE_KEY_IN_FEATURE_REGS 0xB01D define VSCE_FUNC_NOT_SUPP_ON_SOC_PLATFORM 0xB01E define VSCE_INV_SECTOR_REQUEST 0xB01F define VSCE_FLASH_LENGTH_TOO_SMALL 0xB020 define VSCE_FLASH_START_ADDR_TOO_SMALL 0xB021 define VSCE_FLASH_START_SECTOR_TOO_SMALL 0xB022 define VSCE_FLASH_ACCESS_RANGE_REQ_TOO_LARGE 0xB023 define VSCE_INVALID_LBA_REQUEST 0xB024 define VSCE_PST_BUFFER_NOT_ALLOCATED 0xB025 define VSCE_COMMAND_NOT_ALLOWED_FROM_PST 0xB026 define VSC_INVALID_PST_TEST_ID 0xB027 define VSC_INVALID_PST_VECTOR_ADDRESS 0xB028 define VSCE_PST_VSCD_BUFFER_TOO_SMALL 0xB029 define VSCE_SECTOR_OFFSET_NOT_FROM_ZERO 0xB02A define VSCE_INV_RSC_MEM_REQUEST 0xB02B define VSCE_INV_PST_TEST_MODE_REQ 0xB02C define VSCE_CLEAR_DRM_LOG_FAILED 0xB02D define VSCE_CLEAR_FACTORY_FILE_FAILED 0xB02E define VSCE_WARNING_WEAR_LVL_WITH_BG_DIS 0xB02F define VSCE_INVALID_WEAR_LVL_ARGUMENT 0xB030 define VSCE_INVALID_PERIOD_SHIFT_CTLR_ARGUMENT 0xB031 define VSCE_WARNING_DRM_FLUSH_WITH_BG_DIS 0xB032 define VSCE_INVALID_DRM_FLUSH_CTRL_ARGUMENT 0xB033 define VSCE_INVALID_SMART_BACKDOOR_ARGUMENT 0xB034 define VSCE_INVALID_BG_ACTIVITY_ARGUMENT 0xB035 define VSCE_INVALID_DTEMP_SAMPLING_ARGUMENT 0xB036 define VSCE_INVALID_CLEAR_DRM_SECTION 0xB038 define VSCE_DEPOP_INVALID_HEAD_ID 0xB03C define VSCE_REQ_ENDLBA_LESS_THAN_STARTLBA 0xB03F define VSCE_DEPOP_ONLY_ONE_HEAD 0xB040 define VSCE_INVALID_PST_MODE_ARGUMENT 0xB043 define VSCE_PUSH_DOWNS_ON_TRACK 0xB04D define VSCE_INVALID_PERIOD_SUM_PARA 0xB04E define VSCE_HOST_DATA_XFER_DID_NOT_OCCUR 0xB04F define VSCE_INVALID_CLRDRM_AGENTCODE 0xB050 define VSCE_FEATURECTRL_INVALID_ARG 0xB051 define VSCE_FEATURECTRL_RD_FEATURE_UNSUP 0xB052 define VSCE_MEM_TBL_IS_READ_ONLY 0xB053 define VSCE_DEBUG_STOP_OCCURRED 0xB054 define VSCE_RDWRFIELD_INVALID_LENGTH 0xB055 define VSCE_REQUESTED_RELOS_GREATER_THAN_AVAIL 0xB056 define VSCE_INVALID_LENGTH 0xB057 define VSCE_INVALID_COUNT_VALUE 0xB058 define VSCE_INV_ADDRESS_MODE 0xB05A define VSCE_SERVO_TRACE_DISABLED 0xB05B define VSCE_CFG_SVO_TRACE_ALRDY_ENABLED 0xB05C define VSCE_INV_START_WEDGE 0xB05D define VSCE_INV_ZONE_NUMBER 0xB05E define VSCE_CYL_NOT_IN_GAIN_CAL_ZONE 0xB05F define VSCE_DSLE_GAIN_CAL_TO_RUN_THIS_CMD 0xB060 define VSCE_INV_CONFIG_SECTION 0xB061 define VSCE_SVO_INTFCE_RETND_INVLD_TABLE_SIZE 0xB062 define VSCE_GAINCAL_TABLE_NOT_INITIALIZED 0xB063 define VSCE_GAINCAL_TRAINING_NOT_STARTED 0xB064 define VSCE_GAINCAL_VALUE_NOT_TRAINED 0xB065 define VSCE_GAINCAL_FEATURE_NOT_IMPLEMENTED 0xB066 define VSCE_PARTIAL_FILE_REQUEST_PAST_EOF 0xB067 define VSCE_INV_DVT_OPCODE 0xB068 define VSCE_TEMP_SRAM_STATIC_ALREADY_ALLOCATED 0xB069 define VSCE_TABLE_NOT_AVAILABLE_CACHE_RELO_DISABLED 0xB06A define VSCE_NO_TEMP_SRAM_STATIC_ALLOCATED 0xB070 define VSCE_INVALID_SMART_ATTRIBUTE_STATUS 0xB071 define VSCE_INVALID_SMART_ATTRIBUTE_ID 0xB072 define VSCE_SINGLE_PASS_TONESCAN_NOT_SUPPORTED 0xB073 define VSCE_INVALID_WEAR_LVL_MODE 0xB074 define VSCE_INVALID_WL_CONFIG_TABLE_NOT_AVAIL 0xB075 define VSCE_DEPOP_IBI_SRFC1_LOG_NOT_IN_TRK_DIR 0xB076 define VSCE_DEPOP_IBI_SRFC1_PES_NOT_IN_TRK_DIR 0xB077 define VSCE_PARTIAL_FILE_NOT_IN_PST_MODE 0xB078 define VSCE_DFH_MODE_NOT_ENABLED 0xB079 define VSCE_PARAMETER_OUT_OF_RANGE 0xB07A define VSCE_FMT_SELECT_CAPACITY_FAILURE 0xB07B define VSCE_DCM_UNINITIALIZED 0xB07C define VSCE_CAPACITY_GROUP_DEFINITION_ERROR 0xB07D define VSCE_W_R_GAP_INFO_NOT_AVAILABLE 0xB07E define VSCE_DRIVE_PROTECT_LOCKED 0xB080 define VSCE_INVALID_REGION_NUMBER 0xB081 define VSCE_DISK_BACKEND_TBL_NOT_PRESENT 0xB082 define VSCE_COMPAREIDS_LBA_MISCOMPARE_ERROR 0xB083 define VSCE_FLEX_BIAS_FILTER_ERR 0xB084 define VSCE_INV_SMART_EN_CODE 0xB100 define SMART_INV_HOST_SECTOR_REQ 0xB101 define SMART_INV_VENDOR_SECTOR_REQ 0xB102 define SMART_FEAT_NOT_SUPP 0xB103 define SMART_INVALID_SECTOR_CNT 0xB104 define SMART_WRITE_SEL_TEST_ST_INPROGRESS 0xB302 define SMART_SELECTIVE_TEST_INVALID_VERSION 0xB303 define SMART_OFFLINE_IMM_DISABLED 0xB304 define SMART_RESOURCE_ALLOCATION_FAILED 0xB305 define SMART_STATUS_FAILED 0xB306 define VSCE_OBSOLETE_COMMAND 0xB400 define VSCE_SMART_CMD_W_SMART_DIS 0xB401 define VSCE_FEAT_NOT_SUPP 0xB402 define VSCE_SECURITY_CMD_W_BAD_PARAMETER 0xB403 define VSCE_SECURITY_CMD_W_SECURITYMODE_DISABLED 0xB404 define VSCE_SECURITY_CMD_W_DISK_FROZEN 0xB405 define VSCE_SECURITY_CMD_W_DISK_LOCKED 0xB406 define VSCE_SECURITY_CMD_W_DISK_LOCKEDORFROZEN 0xB407 define VSCE_SECURITY_CMD_W_DISK_EXPIREDORFROZEN 0xB408 define VSCE_SECURITY_CMD_W_RECEIVE_DATAERROR 0xB409 define VSCE_SECURITY_CMD_W_PASSWORD_MISCOMPARE 0xB40A define VSCE_SECURITY_CMD_W_PASSWORD_IS_ZERO 0xB40B define VSCE_SECURITY_CMD_W_INV_MASTER_PW_REVISION 0xB40C define VSCE_SECURITY_CMD_NO_ERASE_PREPARE 0xB40D define VSCE_SECURITY_CMD_RCVD_IN_INVAL_STATE 0xB40E define VSCE_CHS_LBA_TOO_LARGE 0xB418 define VSCE_ERRINJ_INV_FUNC_CODE 0xB430 define VSCE_ERRINJ_INV_ERR_TYPE 0xB431 define VSCE_ERRINJ_INV_NRZ_MODE 0xB432 define BG_ERR_INVALID_SELFTEST_SELECTED 0xB800 define SCT_UNSUP_BIST_MODE_IN_PATTERN_REQ 0xC001 define HPA_INVALID_VALUE_SPECIFIED 0xC200 define HPA_LOCK_IN_PLACE 0xC201 define HPA_LOCK_NOT_IN_PLACE 0xC202 define HPA_FREEZE_LOCK_IN_PLACE 0xC203 define HPA_COMMAND_SEQUENCE_ERROR 0xC204 define HPA_SET_MAX_ADDR_EXT_IN_PLACE 0xC205 define HPA_PASSWORD_ACTIVE 0xC206 define HPA_PASSWORD_NOT_ACTIVE 0xC207 define HPA_PASSWORD_MISCOMPARE 0xC208 define HPA_SECOND_NON_VOLATILE_COMMAND 0xC209 define HPA_READ_MAX_FIRST_COMMAND 0xC20A define HPA_COMMAND_SEQUENCE_FAULT 0xC20B define HOST_UNSUPPORTED_ATA_OPCODE 0xC400 define HOST_RECEIVED_LBA_TOO_BIG 0xC401 define HOST_LBA_OUT_OF_RANGE 0xC402 define HOST_DRV_PARAMS_SPT_NOT_SUPPORTED 0xC403 define HOST_DRV_PARAMS_HDS_NOT_SUPPORTED 0xC404 define HOST_UNSUPPORTED_FEATURE_VALUE 0xC405 define HOST_UNSUPPORTED_MULTI_COUNT 0xC406 define HOST_MULTI_NOT_SET 0xC407 define HOST_DIS_IORDY_NOT_SUPPORTED 0xC408 define HOST_UNSUPPORTED_COMMAND_IN_PST_MODE 0xC409 define HOST_INVALID_SECTOR_COUNT 0xC40A define HOST_VSC_CMD_EXECUTING_IN_BKGRND 0xC40B define HOST_CMD_NOT_ALLOWED_GAIN_CAL_MODE_ACTIVE 0xC40C define HOST_QUEUE_CMD_INTERMIX_ERROR 0xC40D define HOST_UNSUPPORTED_SET_FEATURE_SATA_FEATURE 0xC40E define HOST_QUEUE_TAG_ERROR 0xC40F define HOST_INVALID_CHS_CYLINDER_NUMBER 0xC410 define HOST_INVALID_CHS_HEAD_NUMBER 0xC411 define HOST_INVALID_CHS_SECTOR_NUMBER 0xC412 define HOST_UNSUPPORTED_ATA_CMD_IN_SIO_MODE 0xC413 define HOST_RESERVED_STANDBY_TIMER_VALUE 0xC414 define HOST_PUIS_SET_FEATURE_DISABLED_IN_CFG_SECTOR 0xC420 define HOST_PUIS_FLASH_SET_TO_USE_JUMPER 0xC421 define HOST_PUIS_SET_FEATURE_NOT_SUPPORTED_IN_XPM2 0xC422 define HOST_PUIS_SPIN_UP_CMD_NOT_SUPPORTED_IN_XPM2 0xC423 define HOST_PUIS_JUMPER_ENABLED_IN_FLASH_NO_JUMPER 0xC424 define HOST_PUIS_DISABLED_IN_FLASH 0xC425 define HOST_INVALID_ATA_STREAM_ID 0xC430 define HOST_ATA_STREAM_ID_NOT_CFG 0xC431 define HOST_LOCKED_UNIT_ACCESS_DENIED 0xC581 define HOST_NCQ_NO_RDLOG10 0xC586 define HOST_INTERFACE_CRC_ERROR 0xC601 define HOST_INTERFACE_CRC_OVERRUN_UNDERRUN_ERROR 0xC602 define HOST_INTERFACE_OVERRUN_UNDERRUN_ERROR 0xC603 define HOST_SATA_CRC_ERROR 0xC641 define HOST_SATA_RX_PROTOCOL_ERROR 0xC642 define HOST_SATA_RX_SYNC_TERMINATE_ERROR 0xC643 define HOST_SATA_RX_LENGTH_ERROR 0xC644 define HOST_SATA_TX_RERR_ERROR 0xC645 define HOST_SATA_TX_SYNC_TERMINATE_ERROR 0xC646 define HOST_SATA_RETRANSMIT_ERROR 0xC647 define HOST_SATA_TM_FIFO_ERROR 0xC648 define HOST_SATA_DISPARITY_ERROR 0xC649 define HOST_SATA_CODE_VIOLATION_ERROR 0xC64A define HOST_SATA_LINK_HUNG_ERROR 0xC64B define HOST_SATA_UNRECOGNIZED_FIS_ERROR 0xC64C define HOST_SATA_UNKNOWN_ERROR 0xC64D define HOST_SATA_RX_DISPARITY_IN_FIS 0xC64E define HOST_SATA_WRITE_XFER_OVERRUN 0xC64F define DCO_INVALID_FEATURE_SET 0xC800 define DCO_FREEZE_LOCK_IN_PLACE 0xC801 define DCO_ERR_CHECKSUM 0xC802 define DCO_ERR_SIGNATURE 0xC803 define DCO_ERR_INVALID_UDMA_MODE 0xC804 define DCO_ERR_CMND_ABORTED 0xC805 define UNSUPPORTED_LOG_ADDRESS 0xC820 define CHGDEFCMD_INVALID_PSWD_ERROR 0xC840 define CHGDEFCMD_INVALID_CFG_NUM_ERROR 0xC841 define CHGDEFCMD_UNDEFINED_CAPACITY_ERROR 0xC842 define CHGDEFCMD_ILLEGAL_CAPACITY_ERROR 0xC843 define CHGDEFCMD_ERROR_COUNTER_MAX_ERROR 0xC844 define CHGDEFCMD_INVALID_CFGSEL_ARRAY_ERROR 0xC845 define CHGDEFCMD_NOT_ENABLED_ERROR 0xC846 define CHGDEFCMD_NATIVE_MAX_LBA_INVALID_ERROR 0xC847 define CHGDEFCMD_FIELD_LIST_ERROR 0xC848 define NOT_AN_ERR_SIO_INVLD_NON_ATA_OPCODE 0xFFFE define NOT_AN_ERR_VSC_CMD_EXEC_IN_BKG 0xFFFF define VSC_Read_Write_memory_file_46_Error 0x72D2 * *-обозначено возможное значение ошибки | Всего записей: 5716 | Зарегистр. 27-12-2011 | Отправлено: 02:15 29-03-2016 | Исправлено: alexyc1, 12:36 17-09-2016 |
|