smash1
Junior Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
<?xml version = "1.0"?>
<Genesis_Log>
<Log_Body>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Overall Summary:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Start Time: Fri, 08/18/2017 @ 19:27:33
End Time: Fri, 08/18/2017 @ 19:27:57
OverallResult: FAIL
ExitCode: (0x10090007:SF_GENESIS_FLASH_TEST_ONLY_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Environment Settings:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Input Parameters:
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /media/usbhdd/myextract/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
argv[4]: /media/usbhdd/myextract/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27117.0.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/media/usbhdd/fw.log
Log File: SF_Genesis_Main_Log__Fri_08.18.2017_19.27.33.log
Hostname: localhost.localdomain
Host IP Address: 127.0.0.1
Port Number: 0
DeviceName: /dev/sg0
SF_Genesis Version: v1.5.21.20110919-fc14-32bit
SF_Core Library Version: v1.7.0.20110919-fc14-32bit
SF_OS_Information: Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post Processing Device Information:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WWN OUI: UNKNOWN
WWN UniqueID: UNKNOWN
Serial No.: UNKNOWN
Model No.: UNKNOWN
Firmware Revision: UNKNOWN
ROM Revision: UNKNOWN
NAND Page Size: UNKNOWN
Number Of Chip Enable: UNKNOWN
Logical Sectors: UNKNOWN
NAND ID: UNKNOWN
Flash Manufacturer: UNKNOWN
Flash Device: UNKNOWN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.5.21.20110919-fc14-32bit
SF_Core Library: v1.7.0.20110919-fc14-32bit
Copyright 2010-2011, SandForce Inc., All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Fri 08/18/2017 19:27:33] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /media/usbhdd/myextract/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
argv[4]: /media/usbhdd/myextract/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27117.0.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/media/usbhdd/fw.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Fri 08/18/2017 19:27:33] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0'
[Fri 08/18/2017 19:27:38] - Issuing a discovery command for device: '0:0:0:0'
[Fri 08/18/2017 19:27:43] - Discovery command completed...
[Fri 08/18/2017 19:27:43] - Waiting 5 seconds for the system to settle...
[Fri 08/18/2017 19:27:48] - Device designation string '0:0:0:0' is mapped to node '/dev/sg0'
[Fri 08/18/2017 19:27:48] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg0
MFP Package Filename = /media/usbhdd/myextract/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
Configuration File = /media/usbhdd/myextract/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27117.0.driveconfig
Serial No. = 12345
World Wide Name = www_123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Fri 08/18/2017 19:27:48] - Successfully received the IDENTIFY data from the drive...
[Fri 08/18/2017 19:27:49] - Successfully opened the package: /media/usbhdd/myextract/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Fri 08/18/2017 19:27:49] - Successfully extracted *.DriveConfig file: /media/usbhdd/myextract/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27117.0.driveconfig
[Fri 08/18/2017 19:27:49] - Extracted Config_ID: 1 (27117) in DriveConfig file: /media/usbhdd/myextract/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27117.0.driveconfig
[Fri 08/18/2017 19:27:49] - Extracted SerialOutputControl: 0
[Fri 08/18/2017 19:27:49] - Successfully extracted Config record: 27117
[Fri 08/18/2017 19:27:49] - Successfully extracted flashware image: 27117_fw_cl_mlc_Toshiba_64Gb_TH58TEG7DBHBA4C_2Q_2C_1D_PP_R01125_s512.vic
[Fri 08/18/2017 19:27:49] - Successfully extracted manufacturing image: 27117_mf_mlc_Toshiba_64Gb_TH58TEG7DBHBA4C_2Q_2C_1D_PP_R01125_s512.vic
[Fri 08/18/2017 19:27:49] - Proceeding in ROM mode, download feature 1...
[Fri 08/18/2017 19:27:49] - Successfully downloaded MFB to the drive...
[Fri 08/18/2017 19:27:49] - Waiting (5 sec) for the drive to settle...
[Fri 08/18/2017 19:27:54] - Successfully received the IDENTIFY data from the drive...
[Fri 08/18/2017 19:27:54] - Firmware revision reported to be: '582ABBM0'. This indicates MFB download was successful.
[Fri 08/18/2017 19:27:54] - Successfully enabled SMART capabilities...
[Fri 08/18/2017 19:27:56] - Successfully issued a diagnostic unlock...
[Fri 08/18/2017 19:27:56] - Performing the flash test of block 0 (0x0000)...
[Fri 08/18/2017 19:27:57] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 2
Chip Enabled Count: 2
Die Count: 1
Lane Count: 4
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 3 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 3 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 3 | 0x0374 | N4,N5,N6,N8,N10 | FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 3 | 0x0374 | N4,N5,N6,N8,N10 | FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
-----------------------------------------------------------------------------
Total Number of test results: 16
Number of failures: 2
Number of Passed with warnings: 0
No. Passed without warnings: 14
-----------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Fri 08/18/2017 19:27:57] - End of Genesis manufacturing log.
[Fri 08/18/2017 19:27:57] - Exiting...
</Log_Body>
<Overall_Summary>
<Start_Time> Fri, 08/18/2017 @ 19:27:33 </Start_Time>
<End_Time> Fri, 08/18/2017 @ 19:27:57 </End_Time>
<Overall_Result> FAIL </Overall_Result>
<Exit_Code> (0x10090007:SF_GENESIS_FLASH_TEST_ONLY_ERROR) </Exit_Code>
</Overall_Summary>
<Environment_Settings>
<Input_Parameters>
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /media/usbhdd/myextract/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
argv[4]: /media/usbhdd/myextract/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27117.0.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/media/usbhdd/fw.log
</Input_Parameters>
<Log_File> SF_Genesis_Main_Log__Fri_08.18.2017_19.27.33.log </Log_File>
<Hostname> localhost.localdomain </Hostname>
<Host_IP_Address> 127.0.0.1 </Host_IP_Address>
<Port_Number> 0 </Port_Number>
<Device_Name> /dev/sg0 </Device_Name>
<SF_Genesis_Version> v1.5.21.20110919-fc14-32bit </SF_Genesis_Version>
<SF_Core_Library_Version> v1.7.0.20110919-fc14-32bit </SF_Core_Library_Version>
<SF_OS_Information> Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686 </SF_OS_Information>
</Environment_Settings>
<Post_Processing_Device_Info>
<WWN_OUI> UNKNOWN </WWN_OUI>
<WWN_UniqueID> UNKNOWN </WWN_UniqueID>
<Serial_Number> UNKNOWN </Serial_Number>
<Model_Number> UNKNOWN </Model_Number>
<Firmware_Revision> UNKNOWN </Firmware_Revision>
<ROM_Revision> UNKNOWN </ROM_Revision>
<NAND_Page_Size> UNKNOWN </NAND_Page_Size>
<Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable>
<Logical_Sectors> UNKNOWN </Logical_Sectors>
<NAND_ID> UNKNOWN </NAND_ID>
<Flash_Manufacturer> UNKNOWN </Flash_Manufacturer>
<Flash_Device> UNKNOWN </Flash_Device>
</Post_Processing_Device_Info>
</Genesis_Log>
[Fri 08/18/2017 19:27:57] - Overall Result for Device: /dev/sg0 ****** FAIL ******
|
