Danilkin5
Junior Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Цитата: <?xml version = "1.0"?> <Genesis_Log> <Log_Body> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Overall Summary: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Start Time: Sun, 09/03/2017 @ 00:45:41 End Time: Sun, 09/03/2017 @ 00:46:46 OverallResult: FAIL ExitCode: (0x10090012:SF_GENESIS_IDENTIFY_ERROR) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Environment Settings: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Input Parameters: argv[1]: -PROCESS_SSD argv[2]: 0:0:0:0 argv[3]: /home/mint/Downloads/Firm33210/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp argv[4]: /home/mint/Downloads/Firm33210/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/33210.0.driveconfig argv[5]: 12345 argv[6]: www_123 argv[7]: log=/home/mint/Downloads/fw.log Log File: SF_Genesis_Main_Log__Sun_09.03.2017_00.45.41.log Hostname: mint Host IP Address: 127.0.1.1 Port Number: 0 DeviceName: /dev/sg0 SF_Genesis Version: v1.7.0.01020130612-fc14-32bit SF_Core Library Version: v1.7.1.20130612-fc14-32bit SF_OS_Information: Linux 4.8.0-53-generic #56~16.04.1-Ubuntu SMP Tue May 16 01:14:44 UTC 2017 i686 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Post Processing Device Information: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ WWN OUI: UNKNOWN WWN UniqueID: UNKNOWN Serial No.: UNKNOWN Model No.: UNKNOWN Firmware Revision: UNKNOWN ROM Revision: UNKNOWN NAND Page Size: UNKNOWN Number Of Chip Enable: UNKNOWN Logical Sectors: UNKNOWN NAND ID: UNKNOWN Flash Manufacturer: UNKNOWN Flash Device: UNKNOWN ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit SF_Core Library: v1.7.1.20130612-fc14-32bit Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Sun 09/03/2017 00:45:41] - SF_Genesis has been invoked with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ argv[1]: -PROCESS_SSD argv[2]: 0:0:0:0 argv[3]: /home/mint/Downloads/Firm33210/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp argv[4]: /home/mint/Downloads/Firm33210/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/33210.0.driveconfig argv[5]: 12345 argv[6]: www_123 argv[7]: log=/home/mint/Downloads/fw.log ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Sun 09/03/2017 00:45:41] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0' [Sun 09/03/2017 00:45:46] - Issuing a discovery command for device: '0:0:0:0' [Sun 09/03/2017 00:45:51] - Discovery command completed... [Sun 09/03/2017 00:45:51] - Waiting 5 seconds for the system to settle... [Sun 09/03/2017 00:45:56] - Device designation string '0:0:0:0' is mapped to node '/dev/sg0' [Sun 09/03/2017 00:45:56] - Proceeding to process SSD device with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DeviceName = /dev/sg0 MFP Package Filename = /home/mint/Downloads/Firm33210/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp Configuration File = /home/mint/Downloads/Firm33210/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/33210.0.driveconfig Serial No. = 12345 World Wide Name = www_123 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Sun 09/03/2017 00:45:56] - Successfully received the IDENTIFY data from the drive... [Sun 09/03/2017 00:45:56] - Validating Manufacturing Firmware Package: /home/mint/Downloads/Firm33210/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp [Sun 09/03/2017 00:45:57] - Successfully opened the package: /home/mint/Downloads/Firm33210/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp [Sun 09/03/2017 00:45:57] - file /home/mint/Downloads/Firm33210/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/33210.0.driveconfig Loaded successfully [Sun 09/03/2017 00:46:05] - B01 Power Management configuration request detected [Sun 09/03/2017 00:46:05] - B01 Power Management conforms to hardware version 0x0 [Sun 09/03/2017 00:46:05] - Successfully extracted *.DriveConfig file: /home/mint/Downloads/Firm33210/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/33210.0.driveconfig [Sun 09/03/2017 00:46:05] - Extracted Config_ID: 1 (33210) in DriveConfig file: /home/mint/Downloads/Firm33210/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/33210.0.driveconfig [Sun 09/03/2017 00:46:05] - Extracted SerialOutputControl: 0 [Sun 09/03/2017 00:46:05] - Searching for flashware image for configuration 33210 [Sun 09/03/2017 00:46:05] - Manifest found for configuration 33210 [Sun 09/03/2017 00:46:05] - Flashware image extracted: 33210_fw_cl_mlc_Micron_128Gb_33bit_MT29F512G08CMECB_2Q_2C_1D_PP_R02799_s512.vic [Sun 09/03/2017 00:46:05] - Searching for manufacturing image for configuration 33210 [Sun 09/03/2017 00:46:05] - Manifest found for configuration 33210 [Sun 09/03/2017 00:46:05] - Manufacturing image extracted: 33210_mf_mlc_Micron_128Gb_33bit_MT29F512G08CMECB_2Q_2C_1D_PP_R02799_s512.vic [Sun 09/03/2017 00:46:05] - Proceeding in ROM mode, download feature 3... [Sun 09/03/2017 00:46:05] - Successfully downloaded MFB to the drive... [Sun 09/03/2017 00:46:05] - Waiting (5 sec) for the drive to settle... [Sun 09/03/2017 00:46:10] - Successfully received the IDENTIFY data from the drive... [Sun 09/03/2017 00:46:10] - Firmware revision reported to be: '582ABBM0'. This indicates MFB download was successful. [Sun 09/03/2017 00:46:10] - Successfully enabled SMART capabilities... [Sun 09/03/2017 00:46:13] - Successfully issued a diagnostic unlock... [Sun 09/03/2017 00:46:14] - Performing the flash test of block 0 (0x0000)... [Sun 09/03/2017 00:46:17] - Flash Test Results: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ----------------------------------------------------------------------------- Flash Test Parameters: ----------------------------------------------------------------------------- Block Count: 0 Page Count: 1 Bus Count: 2 Chip Enabled Count: 2 Die Count: 1 Lane Count: 4 Plane Count: 2 ----------------------------------------------------------------------------- Results Notes: ----------------------- N1 - At least one page tested and passed with no bit errors. N2 - No test data available. Test may have aborted, or failed during the testing. N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power. N4 - At least one erased page tested had bit error rate greater than half the correction power. N5 - Walking zeros test failed. N6 - Walking ones test failed. N7 - Block contained factory bad block markings and testing was skipped. N8 - At least one page tested and had bit error rate greater than the correction power on plane 0. N9 - Block in plane 0 was marked as a factory bad block. N10 - At least one page tested and had bit error rate greater than the correction power on plane 1. N11 - Block in plane 1 was marked as a factory bad block. ----------------------------------------------------------------------------- +------+------+------+------+--------+--------------------------------------------+---------+ | Bus | CE | Die | Lane | Value | Result Notes | Overall | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 0 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 1 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 2 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 3 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 0 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 1 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 2 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 3 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 0 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 1 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 2 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 3 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 0 | 0x0042 | N3,N6 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 1 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 2 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 3 | 0x0022 | N3,N5 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ ----------------------------------------------------------------------------- Total Number of test results: 16 Number of failures: 0 Number of Passed with warnings: 16 No. Passed without warnings: 0 ----------------------------------------------------------------------------- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Sun 09/03/2017 00:46:17] - Performing the FORMAT Command with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ MemoryWearCycleCapability = 0 CurrentPE_CycleCount = 0 LifeInSeconds = 0 LogicalCapacity = 500118192 SectorSize = 512 SectorAlignmentOffset = 0 ExpectedMemoryID = 33836 (0x842C) ExpectedNumDies = 0 SerialOutputControl = 0 Time[8] = 0x0000000000000000 MiscFlag_Erase_R_Block = 0 MiscFlag_PanicHandlingEnabled = 0 MiscFlag_PanicOnSATA_Error = 0 MiscFlag_WriteThrottlingTestMode = 0 MiscFlag_DisableUserBandECCX = 1 L_PageSize = 0 E_PageSize = 0 ErrorCorrectionPower = 0 ConfigDeviceReadDisturbCount = 0 ConfigDeviceReadDisturbCountLow = 0 ExtraOptions_0_1 = 0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Sun 09/03/2017 00:46:24] - FORMAT command completed... [Sun 09/03/2017 00:46:24] - Waiting (2 sec) for the drive to settle... [Sun 09/03/2017 00:46:26] - Setting up the stamp information through CDU command... [Sun 09/03/2017 00:46:29] - Waiting (2 sec) for the drive to settle... [Sun 09/03/2017 00:46:31] - Downloading the flashware to the drive... feature 3 [Sun 09/03/2017 00:46:31] - Successfully downloaded flashware to the drive... [Sun 09/03/2017 00:46:31] - Waiting (15 sec) for the drive to settle... [Sun 09/03/2017 00:46:46] - Successfully received the IDENTIFY data from the drive... [Sun 09/03/2017 00:46:46] - FATAL_ERROR: Did not recieve the correct firmware revision. it is reported to be: '582ABBM0', indicating flashware download has failed. [Sun 09/03/2017 00:46:46] - End of Genesis manufacturing log. [Sun 09/03/2017 00:46:46] - Exiting... </Log_Body> <Overall_Summary> <Start_Time> Sun, 09/03/2017 @ 00:45:41 </Start_Time> <End_Time> Sun, 09/03/2017 @ 00:46:46 </End_Time> <Overall_Result> FAIL </Overall_Result> <Exit_Code> (0x10090012:SF_GENESIS_IDENTIFY_ERROR) </Exit_Code> </Overall_Summary> <Environment_Settings> <Input_Parameters> argv[1]: -PROCESS_SSD argv[2]: 0:0:0:0 argv[3]: /home/mint/Downloads/Firm33210/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp argv[4]: /home/mint/Downloads/Firm33210/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/33210.0.driveconfig argv[5]: 12345 argv[6]: www_123 argv[7]: log=/home/mint/Downloads/fw.log </Input_Parameters> <Log_File> SF_Genesis_Main_Log__Sun_09.03.2017_00.45.41.log </Log_File> <Hostname> mint </Hostname> <Host_IP_Address> 127.0.1.1 </Host_IP_Address> <Port_Number> 0 </Port_Number> <Device_Name> /dev/sg0 </Device_Name> <SF_Genesis_Version> v1.7.0.01020130612-fc14-32bit </SF_Genesis_Version> <SF_Core_Library_Version> v1.7.1.20130612-fc14-32bit </SF_Core_Library_Version> <SF_OS_Information> Linux 4.8.0-53-generic #56~16.04.1-Ubuntu SMP Tue May 16 01:14:44 UTC 2017 i686 </SF_OS_Information> </Environment_Settings> <Post_Processing_Device_Info> <WWN_OUI> UNKNOWN </WWN_OUI> <WWN_UniqueID> UNKNOWN </WWN_UniqueID> <Serial_Number> UNKNOWN </Serial_Number> <Model_Number> UNKNOWN </Model_Number> <Firmware_Revision> UNKNOWN </Firmware_Revision> <ROM_Revision> UNKNOWN </ROM_Revision> <NAND_Page_Size> UNKNOWN </NAND_Page_Size> <Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable> <Logical_Sectors> UNKNOWN </Logical_Sectors> <NAND_ID> UNKNOWN </NAND_ID> <Flash_Manufacturer> UNKNOWN </Flash_Manufacturer> <Flash_Device> UNKNOWN </Flash_Device> </Post_Processing_Device_Info> </Genesis_Log> [Sun 09/03/2017 00:46:46] - Overall Result for Device: /dev/sg0 ****** FAIL ****** |
| Всего записей: 44 | Зарегистр. 09-07-2017 | Отправлено: 04:19 03-09-2017 | Исправлено: Danilkin5, 21:22 05-09-2017 |
|