Перейти из форума на сайт.

НовостиФайловые архивы
ПоискАктивные темыТоп лист
ПравилаКто в on-line?
Вход Забыли пароль? Первый раз на этом сайте? Регистрация
Компьютерный форум Ru.Board » Hardware » Магнитные носители информации » Ремонт SSD накопителей на контроллерах SandForce (часть 2)

Модерирует : Akam1, Dr_StandBy, vertex4

Akam1 (29-01-2018 04:32): http://forum.ru-board.com/topic.cgi?forum=84&topic=5360  Версия для печати • ПодписатьсяДобавить в закладки
На первую страницук этому сообщениюк последнему сообщению

   

Sobolb

Newbie
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
[more] [root@localhost liveuser]# /media/72C035A7C0357309/Ready_Vertex3/SF_Genesis-v1.7.0.01020130612-fc14-32bit/SF_Genesis -PROCESS_SSD 1:0:0:0 /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27738.0.driveconfig 12345 www_123 log=/home/admin/Ssd_log.log  
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  
 SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit  
 SF_Core Library: v1.7.1.20130612-fc14-32bit  
 
 Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.  
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  
[Sun 12/10/2017 22:08:26] - SF_Genesis has been invoked with the following parameters:
 
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                      argv[1]: -PROCESS_SSD
                      argv[2]: 1:0:0:0
                      argv[3]: /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
                      argv[4]: /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27738.0.driveconfig
                      argv[5]: 12345
                      argv[6]: www_123
                      argv[7]: log=/home/admin/Ssd_log.log
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 
[Sun 12/10/2017 22:08:26] - Instructing the operating system to purge any existing cached data for device: '1:0:0:0'
[Sun 12/10/2017 22:08:31] - Issuing a discovery command for device: '1:0:0:0'
[Sun 12/10/2017 22:08:52] - Discovery command completed...
[Sun 12/10/2017 22:08:52] - Waiting 5 seconds for the system to settle...
[Sun 12/10/2017 22:08:57] - Device designation string '1:0:0:0' is mapped to node '/dev/sg1'
[Sun 12/10/2017 22:08:57] - Proceeding to process SSD device with the following parameters:
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
              DeviceName = /dev/sg1
    MFP Package Filename = /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
      Configuration File = /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27738.0.driveconfig
              Serial No. = 12345
         World Wide Name = www_123
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
[Sun 12/10/2017 22:08:57] - Successfully received the IDENTIFY data from the drive...
[Sun 12/10/2017 22:08:57] - FATAL_ERROR: This drive is already running MFB, please perform a force-download to enter in to the ROM mode first.  Genesis can not process drive in the current state... (0x10090020:SF_GENESIS_ALREADY_RUNNING_MFB_ERROR)
[Sun 12/10/2017 22:08:57] - End of Genesis manufacturing log.
[Sun 12/10/2017 22:08:57] - Exiting...
[Sun 12/10/2017 22:08:57] - Overall Result for Device: /dev/sg1 ****** FAIL ******
[root@localhost liveuser]# /media/72C035A7C0357309/Ready_Vertex3/SF_Genesis-v1.7.0.01020130612-fc14-32bit/SF_Genesis -PROCESS_SSD 1:0:0:0 /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27738.0.driveconfig 12345 www_123 log=/home/admin/Ssd_log.log  
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  
 SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit  
 SF_Core Library: v1.7.1.20130612-fc14-32bit  
 
 Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.  
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  
[Sun 12/10/2017 22:09:47] - SF_Genesis has been invoked with the following parameters:
 
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                      argv[1]: -PROCESS_SSD
                      argv[2]: 1:0:0:0
                      argv[3]: /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
                      argv[4]: /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27738.0.driveconfig
                      argv[5]: 12345
                      argv[6]: www_123
                      argv[7]: log=/home/admin/Ssd_log.log
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 
[Sun 12/10/2017 22:09:47] - Instructing the operating system to purge any existing cached data for device: '1:0:0:0'
[Sun 12/10/2017 22:09:58] - Issuing a discovery command for device: '1:0:0:0'
[Sun 12/10/2017 22:10:03] - Discovery command completed...
[Sun 12/10/2017 22:10:03] - Waiting 5 seconds for the system to settle...
[Sun 12/10/2017 22:10:08] - Device designation string '1:0:0:0' is mapped to node '/dev/sg1'
[Sun 12/10/2017 22:10:08] - Proceeding to process SSD device with the following parameters:
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
              DeviceName = /dev/sg1
    MFP Package Filename = /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
      Configuration File = /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27738.0.driveconfig
              Serial No. = 12345
         World Wide Name = www_123
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
[Sun 12/10/2017 22:10:08] - Successfully received the IDENTIFY data from the drive...
[Sun 12/10/2017 22:10:08] - Validating Manufacturing Firmware Package: /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Sun 12/10/2017 22:10:08] - Successfully opened the package: /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Sun 12/10/2017 22:10:08] - file  /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27738.0.driveconfig Loaded successfully
[Sun 12/10/2017 22:10:08] - Warning:  Unable to query diagnostics information to perform power management settings check
[Sun 12/10/2017 22:10:08] - B01 Power Management configuration request detected
[Sun 12/10/2017 22:10:08] - Successfully extracted *.DriveConfig file: /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27738.0.driveconfig
[Sun 12/10/2017 22:10:08] - Extracted Config_ID: 1 (27738) in DriveConfig file: /media/72C035A7C0357309/Ready_Vertex3/123/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27738.0.driveconfig
[Sun 12/10/2017 22:10:08] - Extracted SerialOutputControl: 0
[Sun 12/10/2017 22:10:08] - Searching for flashware image for configuration 27738
[Sun 12/10/2017 22:10:08] - Manifest found for configuration 27738
[Sun 12/10/2017 22:10:08] - Flashware image extracted: 27738_fw_cl_mlc_Toshiba_BBR6_64Gb_FT64G08UCT18B_2Q_2C_1D_S_PP_R01928_s512.vic
[Sun 12/10/2017 22:10:08] - Searching for manufacturing image for configuration 27738
[Sun 12/10/2017 22:10:08] - Manifest found for configuration 27738
[Sun 12/10/2017 22:10:08] - Manufacturing image extracted: 27738_mf_mlc_Toshiba_BBR6_64Gb_FT64G08UCT18B_2Q_2C_1D_S_PP_R01928_s512.vic
[Sun 12/10/2017 22:10:08] - Proceeding in ROM mode, download feature 3...
[Sun 12/10/2017 22:10:08] - Successfully downloaded MFB to the drive...
[Sun 12/10/2017 22:10:08] - Waiting (5 sec) for the drive to settle...
[Sun 12/10/2017 22:10:13] - Successfully received the IDENTIFY data from the drive...
[Sun 12/10/2017 22:10:13] - Firmware revision reported to be: '582ABBM0'.  This indicates MFB download was successful.
[Sun 12/10/2017 22:10:13] - Successfully enabled SMART capabilities...
[Sun 12/10/2017 22:10:15] - Successfully issued a diagnostic unlock...
[Sun 12/10/2017 22:10:16] - Performing the flash test of block 0 (0x0000)...
[Sun 12/10/2017 22:10:20] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
 Flash Test Parameters:                              
-----------------------------------------------------------------------------
               Block Count: 0                      
                Page Count: 1                      
                 Bus Count: 2                      
        Chip Enabled Count: 2                      
                 Die Count: 1                      
                Lane Count: 4                      
               Plane Count: 2                      
-----------------------------------------------------------------------------
 Results Notes:                                      
-----------------------                              
   N1 - At least one page tested and passed with no bit errors.
   N2 - No test data available.  Test may have aborted, or failed during the testing.
   N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
   N4 - At least  one erased page tested had bit error rate greater than half the correction power.
   N5 - Walking zeros test failed.
   N6 - Walking ones test failed.
   N7 - Block contained factory bad block markings and testing was skipped.
   N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
   N9 - Block in plane 0 was marked as a factory bad block.
  N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
  N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
 
 
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus  | CE   | Die  | Lane | Value  | Result Notes                               | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 0    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 1    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 2    | 0x0003 | N1,N3                                      | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 3    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 1    | 0    | 0    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 1    | 0    | 1    | 0x0003 | N1,N3                                      | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 1    | 0    | 2    | 0x0374 | N4,N5,N6,N8,N10                            |    FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 1    | 0    | 3    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 0    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 1    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 2    | 0x0003 | N1,N3                                      | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 3    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 1    | 0    | 0    | 0x0003 | N1,N3                                      | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 1    | 0    | 1    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 1    | 0    | 2    | 0x0003 | N1,N3                                      | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 1    | 0    | 3    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
 
 
-----------------------------------------------------------------------------
  Total Number of test results: 16                      
            Number of failures: 1                      
         Number of Passed with warnings: 5                      
      No. Passed without warnings: 10                      
-----------------------------------------------------------------------------
 
 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
[Sun 12/10/2017 22:10:20] - End of Genesis manufacturing log.
[Sun 12/10/2017 22:10:20] - Exiting...
[Sun 12/10/2017 22:10:20] - Overall Result for Device: /dev/sg1 ****** FAIL ******
 
 

Всего записей: 13 | Зарегистр. 07-12-2017 | Отправлено: 22:36 10-12-2017 | Исправлено: Sobolb, 22:56 10-12-2017
   

На первую страницук этому сообщениюк последнему сообщению

Компьютерный форум Ru.Board » Hardware » Магнитные носители информации » Ремонт SSD накопителей на контроллерах SandForce (часть 2)
Akam1 (29-01-2018 04:32): http://forum.ru-board.com/topic.cgi?forum=84&topic=5360


Реклама на форуме Ru.Board.

Powered by Ikonboard "v2.1.7b" © 2000 Ikonboard.com
Modified by Ru.B0ard
© Ru.B0ard 2000-2024

BitCoin: 1NGG1chHtUvrtEqjeerQCKDMUi6S6CG4iC

Рейтинг.ru