Konstantin_Poluhin
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору [admin@localhost ~]$ su Пароль: [root@localhost admin]# lsscsi [0:0:0:0] disk ATA Corsair Force GT 5.05 /dev/sda [1:0:0:0] disk ATA SandForce{200026 306A /dev/sdb [3:0:0:0] disk ATA Hitachi HDS72302 MN6O /dev/sdc [6:0:0:0] disk ACASIS ASM1153E 0 /dev/sdd [root@localhost admin]# /home/admin/Ready_Vertex3/SF_Genesis-v1.7.0.01020130612-fc14-32bit/SF_Genesis -PROCESS_SSD 1:0:0:0 /home/admin/Ready_Vertex3/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp /home/admin/Ready_Vertex3/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27448.0.driveconfig 12345 www_123 log=/home/admin/Ready_Vertex3/fw.log ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit SF_Core Library: v1.7.1.20130612-fc14-32bit Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Tue 08/22/2017 16:17:00] - SF_Genesis has been invoked with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ argv[1]: -PROCESS_SSD argv[2]: 1:0:0:0 argv[3]: /home/admin/Ready_Vertex3/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp argv[4]: /home/admin/Ready_Vertex3/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27448.0.driveconfig argv[5]: 12345 argv[6]: www_123 argv[7]: log=/home/admin/Ready_Vertex3/fw.log ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Tue 08/22/2017 16:17:00] - Instructing the operating system to purge any existing cached data for device: '1:0:0:0' [Tue 08/22/2017 16:17:05] - Issuing a discovery command for device: '1:0:0:0' [Tue 08/22/2017 16:17:10] - Discovery command completed... [Tue 08/22/2017 16:17:10] - Waiting 5 seconds for the system to settle... [Tue 08/22/2017 16:17:15] - Device designation string '1:0:0:0' is mapped to node '/dev/sg1' [Tue 08/22/2017 16:17:15] - Proceeding to process SSD device with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DeviceName = /dev/sg1 MFP Package Filename = /home/admin/Ready_Vertex3/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp Configuration File = /home/admin/Ready_Vertex3/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27448.0.driveconfig Serial No. = 12345 World Wide Name = www_123 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Tue 08/22/2017 16:17:15] - Successfully received the IDENTIFY data from the drive... [Tue 08/22/2017 16:17:15] - Validating Manufacturing Firmware Package: /home/admin/Ready_Vertex3/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp [Tue 08/22/2017 16:17:15] - Successfully opened the package: /home/admin/Ready_Vertex3/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp [Tue 08/22/2017 16:17:15] - file /home/admin/Ready_Vertex3/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27448.0.driveconfig Loaded successfully [Tue 08/22/2017 16:17:15] - Warning: Unable to query diagnostics information to perform power management settings check [Tue 08/22/2017 16:17:15] - B01 Power Management configuration request detected [Tue 08/22/2017 16:17:15] - Successfully extracted *.DriveConfig file: /home/admin/Ready_Vertex3/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27448.0.driveconfig [Tue 08/22/2017 16:17:15] - Extracted Config_ID: 1 (27448) in DriveConfig file: /home/admin/Ready_Vertex3/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27448.0.driveconfig [Tue 08/22/2017 16:17:15] - Extracted SerialOutputControl: 0 [Tue 08/22/2017 16:17:15] - Searching for flashware image for configuration 27448 [Tue 08/22/2017 16:17:15] - Manifest found for configuration 27448 [Tue 08/22/2017 16:17:15] - Flashware image extracted: 27448_fw_cl_mlc_Toshiba_64Gb_FT64G08UCT18B_2Q_2C_1D_S_PP_R01600_s512.vic [Tue 08/22/2017 16:17:15] - Searching for manufacturing image for configuration 27448 [Tue 08/22/2017 16:17:15] - Manifest found for configuration 27448 [Tue 08/22/2017 16:17:15] - Manufacturing image extracted: 27448_mf_mlc_Toshiba_64Gb_FT64G08UCT18B_2Q_2C_1D_S_PP_R01600_s512.vic [Tue 08/22/2017 16:17:15] - Proceeding in ROM mode, download feature 3... [Tue 08/22/2017 16:17:16] - Successfully downloaded MFB to the drive... [Tue 08/22/2017 16:17:16] - Waiting (5 sec) for the drive to settle... [Tue 08/22/2017 16:17:21] - Successfully received the IDENTIFY data from the drive... [Tue 08/22/2017 16:17:21] - Firmware revision reported to be: '582ABBM0'. This indicates MFB download was successful. [Tue 08/22/2017 16:17:21] - Successfully enabled SMART capabilities... [Tue 08/22/2017 16:17:23] - Successfully issued a diagnostic unlock... [Tue 08/22/2017 16:17:24] - Performing the flash test of block 0 (0x0000)... [Tue 08/22/2017 16:17:25] - Flash Test Results: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ----------------------------------------------------------------------------- Flash Test Parameters: ----------------------------------------------------------------------------- Block Count: 0 Page Count: 1 Bus Count: 2 Chip Enabled Count: 2 Die Count: 1 Lane Count: 4 Plane Count: 2 ----------------------------------------------------------------------------- Results Notes: ----------------------- N1 - At least one page tested and passed with no bit errors. N2 - No test data available. Test may have aborted, or failed during the testing. N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power. N4 - At least one erased page tested had bit error rate greater than half the correction power. N5 - Walking zeros test failed. N6 - Walking ones test failed. N7 - Block contained factory bad block markings and testing was skipped. N8 - At least one page tested and had bit error rate greater than the correction power on plane 0. N9 - Block in plane 0 was marked as a factory bad block. N10 - At least one page tested and had bit error rate greater than the correction power on plane 1. N11 - Block in plane 1 was marked as a factory bad block. ----------------------------------------------------------------------------- +------+------+------+------+--------+--------------------------------------------+---------+ | Bus | CE | Die | Lane | Value | Result Notes | Overall | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 0 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 1 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 2 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 3 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 0 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 1 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 2 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 3 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 0 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 1 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 2 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 3 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 0 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 1 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 2 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 3 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ ----------------------------------------------------------------------------- Total Number of test results: 16 Number of failures: 16 Number of Passed with warnings: 0 No. Passed without warnings: 0 ----------------------------------------------------------------------------- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Tue 08/22/2017 16:17:25] - End of Genesis manufacturing log. [Tue 08/22/2017 16:17:25] - Exiting... [Tue 08/22/2017 16:17:25] - Overall Result for Device: /dev/sg1 ****** FAIL ****** | Всего записей: 11 | Зарегистр. 13-08-2017 | Отправлено: 14:45 22-08-2017 | Исправлено: Konstantin_Poluhin, 15:22 22-08-2017 |
|