Ремонт SSD накопителей на контроллерах SandForce (часть 3) - [1283] :: Магнитные носители информации

Включил пит с перемычкой далее снял ее. Далее log
#lsscsi
[4:0:0:0] disk SandForc e{200026BB} 3202 /dev/sdb
# ./SF_Genesis -PROCESS_SSD 4:0:0:0 /FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp /FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22073.0.driveconfig 12345 www_123 log=./fw.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 4:0:0:0
argv[3]: /FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
argv[4]: /FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22073.0.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=./fw.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Instructing the operating system to purge any existing cached data for device: '4:0:0:0'
- Issuing a discovery command for device: '4:0:0:0'
- Discovery command completed...
- Waiting 5 seconds for the system to settle...
- Device designation string '4:0:0:0' is mapped to node '/dev/sg2'
- Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg2
MFP Package Filename = /FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
Configuration File = /FW/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22073.0.driveconfig
Serial No. = 12345
World Wide Name = www_123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Successfully received the IDENTIFY data from the drive...
- Validating Manufacturing Firmware Package: /FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
- Successfully opened the package: /FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
- file /FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22073.0.driveconfig Loaded successfully
- B01 Power Management configuration request detected
- B01 Power Management conforms to hardware version 0x0
- Successfully extracted *.DriveConfig file: /FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22073.0.driveconfig
- Extracted Config_ID: 1 (22073) in DriveConfig file: /FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22073.0.driveconfig
- Extracted SerialOutputControl: 0
- Searching for flashware image for configuration 22073
- Manifest found for configuration 22073
- Flashware image extracted: 22073_fw_cl_ccmlc_Intel_64Gb_JS29F32B08JCME2_2Q_4C_1D_S_PP_R00490_s512.vic
- Searching for manufacturing image for configuration 22073
- Manifest found for configuration 22073
- Manufacturing image extracted: 22073_mf_ccmlc_Intel_64Gb_JS29F32B08JCME2_2Q_4C_1D_S_PP_R00490_s512.vic
- Proceeding in ROM mode, download feature 3...
- Successfully downloaded MFB to the drive...
- Waiting (5 sec) for the drive to settle...
- Successfully received the IDENTIFY data from the drive...
- FATAL_ERROR: Did not recieve the correct firmware revision. it is reported to be: '20DABBR0', indicating MFB download has failed.
- End of Genesis manufacturing log.
- Exiting...
- Overall Result for Device: /dev/sg2 ****** FAIL ******

С 22071 шьется на 128G нормально...там память JS29F16B08CCME2

Модерирует : Akam1, Dr_StandBy, vertex4
Akam1 (07-08-2019 07:22): http://forum.ru-board.com/topic.cgi?forum=84&topic=5471	Версия для печати • Подписаться • Добавить в закладки
На первую страницу • к этому сообщению • к последнему сообщению