Kvert007
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору Smyg1 28082 не шьется, вот лог генезиса [Wed 04/04/2018 16:53:58] - Manifest found for configuration 28082 [Wed 04/04/2018 16:53:58] - Manufacturing image extracted: 28082_mf_mlc_Intel_64Gb_JS29F16B08CCME3_1Q_2C_1D_S_PP_R01024_s512.vic [Wed 04/04/2018 16:53:58] - Proceeding in ROM mode, download feature 3... [Wed 04/04/2018 16:55:03] - FATAL_ERROR: Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Extended Error data: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ATA COMMAND : 0x0092 (146) ATA FEATURE : 0x0003 (3) Device Status: 0x0001 (1) Driver Status: 0x0000 (0) Host Status: 0x0008 (8) ~~~~~~~~~~~~~~ Sense Data: ~~~~~~~~~~~~~~ 0 - No Sense: 114 (0x72) OK 1 - Recovered Error: 11 (0x0B) FAIL 2 - Not Ready: 0 (0x00) OK 3 - Medium Error: 0 (0x00) OK 4 - Hardware Error: 0 (0x00) OK 5 - Illegal Request: 0 (0x00) OK 6 - Unit Attention: 0 (0x00) OK 7 - Data Protect: 14 (0x0E) OK 8 - Blank Check: 9 (0x09) OK 9 - Vendor Specific: 12 (0x0C) OK 10 - Copy Aborted: 0 (0x00) OK 11 - Aborted Command: 0 (0x00) OK 12 - Equal Comparison: 0 (0x00) NA 13 - Volume Overflow: 0 (0x00) NA 14 - Miscompare: 0 (0x00) OK 15 - Reserved: 128 (0x80) NA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ System Trace: ~~~~~~~~~~~~~~~~ [ 217.768954] sd 5:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 217.768956] sd 5:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor] [ 217.768957] sd 5:0:0:0: [sdc] Add. Sense: No additional sense information [ 217.768985] ata6.00: disabled [ 222.761516] ata6: hard resetting link [ 223.065231] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 223.065310] ACPI Error (psargs-0359): [DSSP] Namespace lookup failure, AE_NOT_FOUND [ 223.065313] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node f684ae58), AE_NOT_FOUND [ 223.066218] ata6.00: ATA-8: SandForce{200026BB}, 306ABBR0, max UDMA/133 [ 223.066220] ata6.00: 64 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 223.069716] ACPI Error (psargs-0359): [DSSP] Namespace lookup failure, AE_NOT_FOUND [ 223.069719] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node f684ae58), AE_NOT_FOUND [ 223.071863] ata6.00: configured for UDMA/133 [ 223.071866] ata6: EH complete [ 223.071942] scsi 5:0:0:0: Direct-Access ATA SandForce{200026 306A PQ: 0 ANSI: 5 [ 223.073232] sd 5:0:0:0: [sdc] 64 512-byte logical blocks: (32.7 kB/32.0 KiB) [ 223.073241] sd 5:0:0:0: [sdc] 4096-byte physical blocks [ 223.073458] sd 5:0:0:0: [sdc] Write Protect is off [ 223.073466] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 223.073517] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 223.075432] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 223.076328] sdc: unknown partition table [ 223.085311] sd 5:0:0:0: [sdc] Attached SCSI disk [ 245.327142] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 245.327153] ata6.00: failed command: DOWNLOAD MICROCODE [ 245.327182] ata6.00: cmd 92/03:22:00:00:02/00:00:00:00:00/00 tag 0 pio 17408 out [ 245.327186] res 40/00:00:80:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout) [ 245.327195] ata6.00: status: { DRDY } [ 245.327218] ata6: hard resetting link [ 250.667714] ata6: link is slow to respond, please be patient (ready=0) [ 255.348100] ata6: COMRESET failed (errno=-16) [ 255.348109] ata6: hard resetting link [ 260.688823] ata6: link is slow to respond, please be patient (ready=0) [ 265.369194] ata6: COMRESET failed (errno=-16) [ 265.369203] ata6: hard resetting link [ 270.709927] ata6: link is slow to respond, please be patient (ready=0) [ 300.318379] ata6: COMRESET failed (errno=-16) [ 300.318389] ata6: limiting SATA link speed to 1.5 Gbps [ 300.318394] ata6: hard resetting link [ 305.353874] ata6: COMRESET failed (errno=-16) [ 305.353882] ata6: reset failed, giving up [ 305.353888] ata6.00: disabled [ 305.353914] ata6: EH complete ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 04/04/2018 16:55:03] - End of Genesis manufacturing log. [Wed 04/04/2018 16:55:03] - Exiting... [Wed 04/04/2018 16:55:03] - Overall Result for Device: /dev/sg2 ****** FAIL ****** [root@localhost SF_Genesis-v1.7.0.01020130612-fc14-32bit]# |