Akam1
Комса | Редактировать | Профиль | Сообщение | ICQ | Цитировать | Сообщить модератору Вывод списка тестов: уровень С, команда D C>D 02,83,84,03,8A,05,06,26,07,90,93,98,9C,AA,81,09,74,F4,E3,0F, 82,94,56,99,10,11,12,13,14,15,16,17,18,19,1A,1B,1C,1D,1E,2A, DA,DC,D6,D7,D8,D9,DB,DD,0B,7C,78,58,86,23,8F,26,FA,04,40,FD, 31,AB,32,AB,33,AB,34,AB,36,A8,37,26,74,E0,3A,40,3B,3C,3D,3E, A9,3F,96,20,87,88,41,44,97,FC,26,48,26,49,4D,8B,E1,35,BA,6F, 4E,00 01-03 pretreatment (may clear all FW) hard disk installation and servo calibration tests, including 01-02 01 - Manufacturing temporary log 02 - Formatting and test error log, heads and circuit calibration test 03 - servo correction information 04-0F servo test (including scanning defective rail) 04 - oblique wave loading / unloading test 05 - Sensor Lag Test 06 - head switching test 07 - RUNOUT compensation Test 08 - When checking the servo error writing on the disk 2T type 09 - head low-flying display 0A - Head stability testing 0C - read servo defect test position 0D - re-learn RRO ZAP test 0E - Looking Skip cylinder test (not yet realized) 0F - currently written test 10-1F-channel optimization tests, heads, and calibration circuit Test 10 - 1E, 2A - 2E adaptation region # (last area) 0 through - all of the heads 1F - show suitability, VCO, and DIODE temperature setting 20-2F servo parameter debug 2F - FIR adaptive display settings, servo performance Verification Test 20, TEST 60 - Servo Visits 21, TEST 25 - RRO / NRRO Test 23 - Start / Stop (10) 24 - Start / Stop (2,000 times) 29 - servo defect scanning 30-3E defect scanning, analysis, processing (accurate scanning for bad sectors and shield), defect finding and redistribution test 30 - Verify that all disk groups to read, AT-class 31 - wedge defect scanning. heads 0-1 without reading level, 50 W class 32 - Wedge defect scanning head 2-3 without reading stage, grade 50 W 36 Deallocate def found in wedge scan hd 0-1 37 Deallocate def found in wedge scan hd 2-3 38 Deallocate def found in wedge scan hd 4-5 39 Deallocate def found in wedge scan hd 6-7 3A - Use a repeatable read all of the heads polished and defect testing, repeated 50 times 3B-establish defect table; filling damaged head 0,1 3C-establish defect table; filling damaged head 2,3 3D-establish defect table; filled by loss of head 4,5 3E-establish defect table; filling damaged head 6,7 3F-loopback test, written by testing 40-4E logically work test (without any repair, just as the factory can * test, as long as In any error is found on a process that the hard drive does not fit the factory) error rate performance test 40 - Start / Stop (10) 41 - Track intrusive 42 - SPIN STAND simulator - Regional minor bug green 43 - RAM Test 46 - Data compiled ratio 47 - Cold write / erase tracks show 48 - error rate, write-through 49 - write / read / compare (zero style) 4A-compensation coefficient detection 4B-read 4B - All tracks written show cold 4C-head flying height Measuring 4D-collected data automatically FA accumulation 4E-checking health and creating self-summary or 50 4F 4F-Failed Disk Test 50 - through the disk test special test 51 - Error Rate 52 - RRO test disk group to write 54 - Pick crooked measuring 55 - one million random read and write 56 - write / read / compare (zero style) 61,62,63 - Manufacturing Reliability Test 64 - Head stability testing 65,66,67 - Media Delay Test 7D - Parabolic Curve Fit Test of Bias vs. QMCount 78 - |