lerom27
Full Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 12/02/2020 12:38:47] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 4:0:0:0
argv[3]: /media/SSD/SF/Intel1500Pro/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
argv[4]: /media/SSD/SF/Intel1500Pro/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22746.0.driveconfig
argv[5]: CVDA414204UK1802GN
argv[6]: www_123
argv[7]: log=/media/SSD/SF/Intel1500Pro/FW_PPRO_5_8_2_Release.906190.release--0/FW.LOG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 12/02/2020 12:38:47] - Instructing the operating system to purge any existing cached data for device: '4:0:0:0'
[Wed 12/02/2020 12:38:52] - Issuing a discovery command for device: '4:0:0:0'
[Wed 12/02/2020 12:38:57] - Discovery command completed...
[Wed 12/02/2020 12:38:57] - Waiting 5 seconds for the system to settle...
[Wed 12/02/2020 12:39:02] - Device designation string '4:0:0:0' is mapped to node '/dev/sg3'
[Wed 12/02/2020 12:39:02] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg3
MFP Package Filename = /media/SSD/SF/Intel1500Pro/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
Configuration File = /media/SSD/SF/Intel1500Pro/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22746.0.driveconfig
Serial No. = CVDA414204UK1802GN
World Wide Name = www_123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 12/02/2020 12:39:02] - Successfully received the IDENTIFY data from the drive...
[Wed 12/02/2020 12:39:02] - Validating Manufacturing Firmware Package: /media/SSD/SF/Intel1500Pro/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Wed 12/02/2020 12:39:37] - Successfully opened the package: /media/SSD/SF/Intel1500Pro/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Wed 12/02/2020 12:39:37] - file /media/SSD/SF/Intel1500Pro/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22746.0.driveconfig Loaded successfully
[Wed 12/02/2020 12:39:37] - Warning: Unable to query diagnostics information to perform power management settings check
[Wed 12/02/2020 12:39:37] - B01 Power Management configuration request detected
[Wed 12/02/2020 12:39:37] - Successfully extracted *.DriveConfig file: /media/SSD/SF/Intel1500Pro/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22746.0.driveconfig
[Wed 12/02/2020 12:39:37] - Extracted Config_ID: 1 (22746) in DriveConfig file: /media/SSD/SF/Intel1500Pro/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22746.0.driveconfig
[Wed 12/02/2020 12:39:37] - Extracted SerialOutputControl: 0
[Wed 12/02/2020 12:39:38] - Searching for flashware image for configuration 22746
[Wed 12/02/2020 12:39:38] - Manifest found for configuration 22746
[Wed 12/02/2020 12:39:38] - Flashware image extracted: 22746_fw_cl_mlc_Intel_64Gb_JS29F32B08JAME1_2Q_4C_1D_S_PP_R00704_s512.vic
[Wed 12/02/2020 12:39:38] - Searching for manufacturing image for configuration 22746
[Wed 12/02/2020 12:39:38] - Manifest found for configuration 22746
[Wed 12/02/2020 12:39:38] - Manufacturing image extracted: 22746_mf_mlc_Intel_64Gb_JS29F32B08JAME1_2Q_4C_1D_S_PP_R00704_s512.vic
[Wed 12/02/2020 12:39:38] - Proceeding in ROM mode, download feature 3...
[Wed 12/02/2020 12:39:38] - Successfully downloaded MFB to the drive...
[Wed 12/02/2020 12:39:38] - Waiting (5 sec) for the drive to settle...
[Wed 12/02/2020 12:39:43] - Successfully received the IDENTIFY data from the drive...
[Wed 12/02/2020 12:39:43] - Firmware revision reported to be: '582ABBM0'. This indicates MFB download was successful.
[Wed 12/02/2020 12:39:43] - Successfully enabled SMART capabilities...
[Wed 12/02/2020 12:39:45] - Successfully issued a diagnostic unlock...
[Wed 12/02/2020 12:39:46] - Performing the flash test of block 0 (0x0000)...
[Wed 12/02/2020 12:40:00] - FATAL_ERROR: Could not perform DoFlashTest() on the drive... (0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ATA COMMAND : 0x00B0 (176)
ATA FEATURE : 0x00D5 (213)
Device Status: 0x0001 (1)
Driver Status: 0x0000 (0)
Host Status: 0x0008 (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0 - No Sense: 114 (0x72) OK
1 - Recovered Error: 11 (0x0B) FAIL
2 - Not Ready: 0 (0x00) OK
3 - Medium Error: 0 (0x00) OK
4 - Hardware Error: 0 (0x00) OK
5 - Illegal Request: 0 (0x00) OK
6 - Unit Attention: 0 (0x00) OK
7 - Data Protect: 14 (0x0E) OK
8 - Blank Check: 9 (0x09) OK
9 - Vendor Specific: 12 (0x0C) OK
10 - Copy Aborted: 0 (0x00) OK
11 - Aborted Command: 0 (0x00) OK
12 - Equal Comparison: 0 (0x00) NA
13 - Volume Overflow: 0 (0x00) NA
14 - Miscompare: 0 (0x00) OK
15 - Reserved: 1 (0x01) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~
[ 1749.189465] sd 4:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1749.189475] sd 4:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor]
[ 1749.189486] sd 4:0:0:0: [sdd] Add. Sense: No additional sense information
[ 1749.189581] ata5.00: disabled
[ 1754.196168] ata5: hard resetting link
[ 1754.656250] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1754.657325] ata5.00: ATA-8: SandForce{200026BB}, 306ABBR0, max UDMA/133
[ 1754.657338] ata5.00: 64 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1754.663119] ata5.00: configured for UDMA/133
[ 1754.663138] ata5: EH complete
[ 1754.663429] scsi 4:0:0:0: Direct-Access ATA SandForce{200026 306A PQ: 0 ANSI: 5
[ 1754.663864] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 1754.664552] sd 4:0:0:0: [sdd] 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
[ 1754.664562] sd 4:0:0:0: [sdd] 4096-byte physical blocks
[ 1754.664669] sd 4:0:0:0: [sdd] Write Protect is off
[ 1754.664677] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1754.664726] sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1754.665104] sdd: unknown partition table
[ 1754.675272] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 1765.605006] CE: hpet increased min_delta_ns to 7500 nsec
[ 1811.514677] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x780100 action 0x6
[ 1811.514681] ata5.00: irq_stat 0x08000002
[ 1811.514683] ata5: SError: { UnrecovData 10B8B Dispar BadCRC Handshk }
[ 1811.514686] ata5.00: failed command: SMART
[ 1811.514690] ata5.00: cmd b0/d5:04:e1:4f:c2/00:00:00:00:00/00 tag 0 pio 2048 in
[ 1811.514691] res 50/00:00:01:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 1811.514693] ata5.00: status: { DRDY }
[ 1811.514697] ata5: hard resetting link
[ 1811.974082] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1811.974532] ata5.00: model number mismatch 'SandForce{200026BB}' != 'SandForce'
[ 1811.974540] ata5.00: revalidation failed (errno=-19)
[ 1811.974549] ata5: limiting SATA link speed to 1.5 Gbps
[ 1816.974310] ata5: hard resetting link
[ 1817.434221] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1817.435252] ata5.00: model number mismatch 'SandForce{200026BB}' != 'SandForce'
[ 1817.435261] ata5.00: revalidation failed (errno=-19)
[ 1817.435269] ata5.00: disabled
[ 1822.434207] ata5: hard resetting link
[ 1822.894224] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1822.895545] ata5.00: ATA-8: SandForce, 582ABBM0, max UDMA/133
[ 1822.895555] ata5.00: 375000000 sectors, multi 1: LBA48
[ 1822.905778] ata5.00: configured for UDMA/133
[ 1822.905817] ata5: EH complete
[ 1822.905836] ata5.00: detaching (SCSI 4:0:0:0)
[ 1822.911404] sd 4:0:0:0: [sdd] Stopping disk
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 12/02/2020 12:40:00] - End of Genesis manufacturing log.
[Wed 12/02/2020 12:40:00] - Exiting...
[Wed 12/02/2020 12:40:01] - Overall Result for Device: /dev/sg3 ****** FAIL **** |
Всего записей: 437 | Зарегистр. 24-10-2011 | Отправлено: 11:13 02-12-2020 | Исправлено: lerom27, 11:16 02-12-2020 |
|
