wein
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
в общем купил девайс и доигрался...
была старая прошивка, решил заменить на девятую. подсовывал ему файл с прошивкой, а он ругался, мол не верный файл мне даешь... решил забить и использовать как есть. выключил, включил, а он не хочет работать...
вот что дает терминал:
Uncompressing Linux.............................................................
................................................................................
....................................................... done, booting the kernel
.
Linux version 2.6.25.4joe (yohanes@koala) (gcc version 3.4.4) #2 PREEMPT Sat Sep
20 19:56:59 ICT 2008
CPU: FA526id(wb) [66015261] revision 1 (ARMv4), cr=0000397f
Machine: STAR_STR9100
Warning: bad configuration page, trying to continue
Ignoring unrecognised tag 0x0000000
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 2, 16 byte lines, 512 sets
CPU0: D cache: 16384 bytes, associativity 2, 16 byte lines, 512 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Kernel command line: console=ttyS0,38400 root=LABEL=/ rootdelay=10
PID hash table entries: 128 (order: 7, 512 bytes)
STR9100 CPU Clock: 200 MHz
IRQ Timer1 at interrupt number 0x0 and clock 100000000(Hz)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 32MB = 32MB total
Memory: 26120KB available (2884K code, 212K data, 3180K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
bus: 'platform': registered
net_namespace: 152 bytes
NET: Registered protocol family 16
bus: 'platform': add device ehci-str9100
bus: 'platform': add device ohci-str9100
bus: 'platform': add device i2c-str9100
bus: 'platform': add d
bus: 'platform': add device watchdog-str9100
bus: 'platform': add device button-str9100
bus: 'scsi': registered
SCSI subsystem initialized
bus: 'usb': registered
bus: 'usb': add driver usbfs
usbcore: registered new interface driver usbfs
bus: 'usb': add driver hub
usbcore: registered new interface driver hub
bus: 'usb': add driver usb
usbcore: registered new device driver usb
bus: 'serio': registered
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
fuse init (API version 7.9)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Non-volatile memory driver v1.2
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
bus: 'platform': add device serial8250
bus: 'platform': add driver serial8250
bus: 'platform': add device serial8250.10
serial8250.10: ttyS0 at MMIO 0xf7800000 (irq = 10) is a 16550A
console [ttyS0] enabled
brd: module loaded
loop: module loaded
GSW : init
star9100_gsw1000_lan_init dev name = eth0
star9100_gsw1000_lan_probe dev name = eth0
BIST complete
eth0: Switch Type: GENERAL(Two Macs mode)
Lanport
IC_PLUS_PHY
config lan port phy 5
configure icplus
Check MAC/PHY icplus 0 Link Status : port cfg reg = f700000
val = 00463d75
Check MAC/PHY 0 Link Status : UP!
Configure CPU port
Write some default ARL table entries ,default ARL entry for VLAN0
Write some default ARL table entries ,default ARL entry for VLAN1
doneether setup
create proc entry
ok creating proc eth link entry
eth0: STAR9100 LAN Port Initial Finished
bus: 'usb': add driver dm9601
usbcore: registered new interface driver dm9601
Driver 'sd' needs updating - please use bus_type methods
bus: 'scsi': add driver sd
base c3000000 phys 10000000
str9100_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
str9100_flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 3 MTD partitions on "str9100_flash":
0x00000000-0x00020000 : "armboot"
0x00020000-0x007e0000 : "Kernel & Ramdisk"
0x007e0000-0x00800000 : "configure"
usbmon: debugfs is not available
ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
registering ehci-str9100
bus: 'platform': add driver ehci-str9100
Initializing STR9100 EHCI controller
ehci-str9100 ehci-str9100: STR9100 EHCI Host Controller
ehci-str9100 ehci-str9100: new USB bus registered, assigned bus number 1
ehci halt: regs fcc00020
ehci halt: regstat fcc00024 temp = 4096
ehci-str9100 ehci-str9100: irq 24, io mem 0xfcc00000
ehci-str9100 ehci-str9100: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
bus: 'usb': add device usb1
usb usb1: configuration #1 chosen from 1 choice
bus: 'usb': add de
hub 1-0:1.0: USB hub found
get hub descriptor devnum = 1
hub 1-0:1.0: 2 ports detected
EHCI platform driver Successfully registerd<7>ohci_hcd: 2006 August 04 USB 1.1 '
Open' Host Controller (OHCI) Driver
bus: 'platform': add driver ohci-str9100
Initializing STR9100 OHCI controller
ohci-str9100 ohci-str9100: STR9100 OHCI
ohci-str9100 ohci-str9100: new USB bus registered, assigned bus number 2
ohci-str9100 ohci-str9100: irq 23, io mem 0xfc400000
bus: 'usb': add device usb2
usb usb2: configuration #1 chosen from 1 c
bus: 'usb': add device 2-0:1.0
hub 2-0:1.0: USB hub found
get hub descriptor devnum = 1
hub 2-0:1.0: 2 ports detected
bus: 'usb': add driver usblp
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
bus: 'usb': add driver usb-storage
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
bus: 'usb': add driver libusual
usbcore: registered new interface driver libusual
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protoco
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing init memory: 3180K
mounting /tmp...done
mounting /dev/pts...done
mounting /proc...done
mounting /sys...done
usb 1-2: new high speed USB device using ehci-str9100 and address 2
bus: 'usb': add device 1-2
usb 1-2: configuration #1 chosen from 1 choice
bus: 'usb': add device 1-2:1.0
scsi0 : SCSI emulation for USB Mass Storage devices
scsi 0:0:0:0: Direct-Access PQ: 0 ANSI: 2 CCS
bus: 'scsi': add device 0:0:0:0
sd 0:0:0:0: [sda] Attached SCSI disk
Initializing random number generator... done.
Starting network...
[gsw_set_lan_mac_address] interface eth0 MAC c11c7ee6
sock_add: 0 <1>sock_add: c0 <1>sock_add: b0 <1>sock_add: c0 <1>sock_add: d0 <1>s
ock_add: e0
udhcpc (v1.10.4) started
opening LAN00:c0:b0:c0:d0:e0enable
install_isr
Sending discover...
Sending select for 192.168.1.36...
Lease of 192.168.1.36 obtained, lease time 259200
deleting routers
route: SIOCDELRT: No such process
adding dns 192.168.1.1
Starting network time protocol daemon: ntpd.
Starting dropbear sshd: OK
Starting ProFTPD: warning: `proftpd' uses 32-bit capabilities (legacy support in
use)
- warning: unable to determine IP address of '_none_'
- error: no valid servers configured
- Fatal: error processing configuration file '/etc/proftpd.conf'
FAILED
BusyBox v1.10.4 (2008-07-20 00:43:02 ICT) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
/ #
прошить его не получается. флешка не spi, a tsop56.
посоветуйте что сделать. следовал инструкции по восстановлению, но меню сильно отличается. смог по tftp послать прошивку в память, но не смог ее запустить.
так же не смог на флешку распаковать дебиан. |
