Microsoft Virtual PC - [18] :: Программы :: Компьютерный форум Ru.Board

Привет всем и особенно eika!
Несколько дней парился на работе и не лазил в сеть

.
Спасибо большое за советы, но, к сожалению, не смотря ни на что настроить Loopback adapter не получается

.
Утилита Netdiag пишет следующее:

C:\Documents and Settings\>netdiag

................................

Computer Name: ***-****
DNS Host Name: ***-****
System info : Windows XP Professional (Build 2600)
Processor : x86 Family 15 Model 2 Stepping 4, GenuineIntel

Netcard queries test . . . . . . . : Passed
[WARNING] The net card 'Microsoft Loopback Adapter' may not be working becau
se it has not received any packets.
[WARNING] The net card 'Microsoft Loopback Adapter - Virtual Machine Network
Services Driver' may not be working because it has not received any packets.

Per interface results:

Adapter : Loopback adapter

Netcard queries test . . . : Passed

Host Name. . . . . . . . . : ***-****
IP Address . . . . . . . . : 192.168.0.10
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.0.3
Dns Servers. . . . . . . . : ***.***.*.**
***.**.**.***

AutoConfiguration results. . . . . . : Passed

Default gateway test . . . : Passed

NetBT name test. . . . . . : Passed
No remote names have been found.

WINS service test. . . . . : Skipped
There are no WINS servers configured for this interface.

Adapter : TRENDnet

Netcard queries test . . . : Passed

Host Name. . . . . . . . . : ***-****
Autoconfiguration IP Address : 192.168.0.3
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.0.1
Dns Servers. . . . . . . . : ***.***.*.**
***.**.**.***

IpConfig results . . . . . : Failed
Pinging DHCP server - not reachable
WARNING: DHCP server may be down.

AutoConfiguration results. . . . . . : Failed
[WARNING] AutoConfiguration is in use. DHCP not available.

Default gateway test . . . : Passed

NetBT name test. . . . . . : Passed
No remote names have been found.

WINS service test. . . . . : Skipped
There are no WINS servers configured for this interface.

Global results:

Domain membership test . . . . . . : Passed
Dns domain name is not specified.
Dns forest name is not specified.

NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{8BE0F539-823D-4D4B-B268-BD3835FB80E1}
NetBT_Tcpip_{5D166FFD-9E8A-4C85-BD2D-96B28769213D}
2 NetBt transports currently configured.

Autonet address test . . . . . . . : Passed

IP loopback ping test. . . . . . . : Passed

Default gateway test . . . . . . . : Passed

NetBT name test. . . . . . . . . . : Passed

Winsock test . . . . . . . . . . . : Passed

DNS test . . . . . . . . . . . . . : Passed

Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{8BE0F539-823D-4D4B-B268-BD3835FB80E1}
NetBT_Tcpip_{5D166FFD-9E8A-4C85-BD2D-96B28769213D}
The redir is bound to 2 NetBt transports.

List of NetBt transports currently bound to the browser
NetBT_Tcpip_{5D166FFD-9E8A-4C85-BD2D-96B28769213D}
NetBT_Tcpip_{8BE0F539-823D-4D4B-B268-BD3835FB80E1}
The browser is bound to 2 NetBt transports.

DC discovery test. . . . . . . . . : Skipped

DC list test . . . . . . . . . . . : Skipped

Trust relationship test. . . . . . : Skipped

Kerberos test. . . . . . . . . . . : Skipped

LDAP test. . . . . . . . . . . . . : Skipped

Bindings test. . . . . . . . . . . : Passed

WAN configuration test . . . . . . : Skipped
No active remote access connections.

Modem diagnostics test . . . . . . : Passed

IP Security test . . . . . . . . . : Passed
Service status is: Started
Service startup is: Automatic
IPSec service is available, but no policy is assigned or active
Note: run "ipseccmd /?" for more detailed information

The command completed successfully

Что это может значить? Я имею ввиду
[WARNING] The net card 'Microsoft Loopback Adapter' may not be working becau
se it has not received any packets.
[WARNING] The net card 'Microsoft Loopback Adapter - Virtual Machine Network
Services Driver' may not be working because it has not received any packets.

И еще выдержка из help-а по VPC:

Extending networking capabilities for virtual machinesYou can install and configure Microsoft Loopback Adapter to extend networking capabilities for virtual machines. You can use Microsoft Loopback Adapter to provide the following networking capabilities:

Provide networking for virtual machines when the host operating system does not have a physical network connection available. To provide network connectivity between the host and virtual machines, install Microsoft Loopback Adapter on the host operating system and then configure a network connection on each virtual machine and the host operating system.
Set up a complex virtual network environment with multiple routers and firewalls. To provide multiple network solutions for virtual machines, install Microsoft Loopback Adapter on the host operating system and then set up as many network connections on each operating system as required.

Important

If you want to access the Internet from a virtual machine configured to use the Microsoft Loopback Adapater, Internet Connection Sharing must be enabled on the host computer. For more information about Internet Connection Sharing, consult the documentation included with the version of Windows installed on the host computer.
Setting up a virtual network connection requires first installing Microsoft Loopback Adapter and then configuring the network connection for the adapter. Configuration for Microsoft Loopback Adapter includes configuring TCP/IP on the network connection to use an appropriate IP address.

You can use any TCP/IP address, but it is best to choose one from a reserved range of private TCP/IP addresses. For example, TCP/IP addresses of the form 192.168.x.y, where x is a value between 0 and 255 and y is a value between 1 and 254, are private. The value you choose for x must be the same on the host operating system and each guest operating system that is to be part of this virtual network. If your primary Ethernet connection uses one of these private addresses, you must choose a different value for x to assign to Microsoft Loopback Adapter.

For information about how to set up Microsoft Loopback Adapter for a host operating system running Windows XP or Windows 2000, see Install and configure Microsoft Loopback Adapter. For information about installing Microsoft Loopback Adapter on other operating systems, see the documentation for the operating system.

For more information about networking, see Managing network adapter availability for virtual machines.

Привлек внимание этот абзац:

If your primary Ethernet connection uses one of these private addresses, you must choose a different value for x to assign to Microsoft Loopback Adapter.

Спасибо за помощь и понимание.

Модерирует : gyra, Maz
Версия для печати • Подписаться • Добавить в закладки
Страницы: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128