Выбор CD-RW. Какой лучше? - [84] :: Выбор комплектующих

Болванки нормальные:Samsung premium 48x 700 Mb/80min; Msonic 52x silver-silver - это R-ки. RW- Digitex 16x-24x ultra speed 700Mb/80min (Nero выдаёт 703 Мb/79min59sec). Брал у товарища Verbatim - результат тот же!

Добавлено
А вот log записи:
16.4.2004
CD Copy
9:01:44 #1 Phase 90 File dlgbrnst.cpp, Line 1800
Buffer Underrun Protection activated

9:01:44 #2 Text 0 File Reader.cpp, Line 118
Reader running

9:01:44 #3 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST CD-RW GCE-8525B running

9:01:44 #4 Phase 48 File dlgbrnst.cpp, Line 1800
Analyzing disc

9:01:44 #5 CDCOPY -1 File CDCopy.cpp, Line 1896
The CD is copyrighted

9:01:44 #6 Text 0 File CDCopy.cpp, Line 2116
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 343381 343380 ( 76:20.30)

9:01:44 #7 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: ON
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 343381 = 343381, data (TRM_DATA_MODE1, block size 2048)

9:01:44 #8 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using CD-R/RW media

9:01:45 #9 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 343380 ( 76:20.30)

9:01:45 #10 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

9:01:45 #11 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: HL-DT-ST CD-RW GCE-8525B;
CDRW code: 00 97 25 31; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

9:01:45 #12 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:01:45 #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 343381 (343381) = #343381/76:18.31
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 343381 blocks [HL-DT-ST CD-RW GCE-8525B ]
--------------------------------------------------------------

9:01:45 #14 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [HL-DT-ST CD-RW GCE-8525B ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 703551488, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
343381 | lead-out | 1 | 0x00 | 0x41

9:01:45 #15 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 24x (3 600 KB/s)

9:01:45 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

9:01:45 #17 Text 0 File Mmc.cpp, Line 14883
StartDAO : CD-Text - Off

9:01:45 #18 Text 0 File Mmc.cpp, Line 19487
Set BUFE: supported -> ON

9:01:45 #19 Text 0 File Mmc.cpp, Line 15170
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4c 14 1f

9:06:00 #20 SCSI -1135 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04205000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

9:06:00 #21 Text 0 File Cdrdrv.cpp, Line 1277
09:06:00.202 - HL-DT-ST CD-RW GCE-8525B\H2 T0 : Queue again later

9:06:04 #22 SCSI -1064 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04820000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x05 0x3B 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x21 0x02

9:06:04 #23 CDR -1135 File Writer.cpp, Line 301
Write error
HL-DT-ST CD-RW GCE-8525B\H2 T0

9:06:04 #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

9:06:06 #25 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

9:06:06 #26 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 24x (3 600 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28.10.2003 13:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29.08.2002 2:27:50 (Adapter driver for rec)
File 'Drivers\imagedrv.sys': Ver=2.23.0.0, size=89184 bytes, created 19.12.2003 20:48:40 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)

Модерирует : Akam1, Dr_StandBy, vertex4
Версия для печати • Подписаться • Добавить в закладки
Страницы: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97