Dr StandBy
Большой дядька moderator | Редактировать | Профиль | Сообщение | ICQ | Цитировать | Сообщить модератору
Motherboard | BIOS ver. | Description | GA-7N400 | F3 | To improve stability, set DDR frequency to 266MHz when dimm 3 and 4 occupied | GA-7N400 Pro 2 | F3 | To improve stability, set DDR frequency to 266MHz when dimm 3 and 4 occupied | GA-7N400E | F3 | To improve stability, set DDR frequency to 266MHz when dimm 3 and 4 occupied | GA-7N400E-L | F3 | To improve stability, set DDR frequency to 266MHz when dimm 3 and 4 occupied | GA-7N400-L | F3 | To improve stability, set DDR frequency to 266MHz when dimm 3 and 4 occupied | GA-7N400V | F3 | To improve stability, set DDR frequency to 266MHz when dimm 3 and 4 occupied | GA-7N400V-L | F3 | To improve stability, set DDR frequency to 266MHz when dimm 3 and 4 occupied | GA-7N400 Pro 2 | F3 | To improve stability, set DDR frequency to 266MHz when dimm 3 and 4 occupied | GA-8KNXP Ultra | F6 | Add ICH5R SATA RAID 1 mode support Note! If your OS (like WinXP) is already installed on SATA HDDs under ICH5R controller, please make sure to update ICH5R SATA RAID driver from our IUCD 2.4 or Gigabyte website first, then update bios F6 Add SCSI RAID mode support SCSI RAID mode limitations: A. S3 (suspend to RAM) mode is not supported if operating system is installed under SCSI RAID controller. B. Win98 and WinME is not supported. C. Only RAID mode 0, and 1 are supported. D. Please press Control & A key during SCSI RAID ROM boot up to select normal SCSI or RAID mode. E. Please use drivers from Gigabyte website for SCSI RAID mode only. |
---------- Не думай. Если думаешь - не говори Если думаешь и говоришь - не пиши. Если думаешь, говоришь, пишешь - не подписывай. Если думаешь, говоришь, пишешь и подписываешь - не удивляйся (Ф.Э.Д.) |
|