Перейти из форума на сайт.

НовостиФайловые архивы
ПоискАктивные темыТоп лист
ПравилаКто в on-line?
Вход Забыли пароль? Первый раз на этом сайте? Регистрация
Компьютерный форум Ru.Board » Hardware » Оптические носители информации » MATSHITA UJ 850

Модерирует : Akam1, Dr_StandBy, vertex4

 Версия для печати • ПодписатьсяДобавить в закладки

Открыть новую тему     Написать ответ в эту тему

RYZHAYA

Newbie
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Собственно, вся проблема в названии. Не пишет НИКАКОЙ формат ДВД-дисков (дата, ДВД и т.д.), вернее, начинает, а потом примерно на 50% выдаёт сообщение «неопределённая ошибка рекордера» и выплёвывает диск. Перестановка Винды пару дней назад ничего не дала, пытается ДВД-шники писать только на Неро, остальные проги их вообще не видят, осталась возможность только при помощи NLite прожигать образы сборок винды на обыкновенных СД. Что делать??? Как вылечить рекордер???

Всего записей: 23 | Зарегистр. 09-08-2008 | Отправлено: 14:15 08-10-2008
DJLyolik

Full Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
RYZHAYA
Ну для начала обновить прошивку. Если не поможет, можно попробовать почистить привод.
Как разбирать и чистить DVD/CD drive? Если это не поможет - менять.

Всего записей: 461 | Зарегистр. 09-07-2005 | Отправлено: 17:38 08-10-2008
RYZHAYA

Newbie
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Прошивка обновлена - не помогло, почистить смогу только на выходных, когда дома буду, отпишусь потом... А, вот, ещё... Попробовала Burn4free, эта прога распознала диск, записала датаДВД без проблем.. Может это проблема не рекордера, а именно бреннера???

Всего записей: 23 | Зарегистр. 09-08-2008 | Отправлено: 18:17 08-10-2008
Trotskiy1

Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
читает но не пишет  
 
Windows Vista 6.0
IA32
WinAspi: -
 
NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100
 
Recorder:             <MATSHITA DVD-RAM UJ-850S>Version: 1.21 - HA 1 TA 0 - 9.0.9.100
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default
CD-ROM:               <PS3500R  UGC090S         >Version: 2.0B - HA 1 TA 1 - 9.0.9.100
 Adapter driver:      <IDE>                     HA 1
 
=== Scsi-Device-Map ===
                     : Hitachi HTS541612J9S    SBDO  nvstor32 Port 2 ID 0  DMA: Off
CdRomPeripheral      : PS3500R UGC090S         2.0B  av2qru68 Port 4 ID 0  DMA: Off
 
=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-850S   E:   CdRom0
PS3500R UGC090S            F:   CdRom1
=======================
 
AutoRun : 1
Excluded drive IDs:  
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 1022MB (1047032kB)
Free physical memory: 206MB (211616kB)
Memory in use       : 79 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)  
 
15.10.2008
Проект ISO
0:55:16    #1 Text 0 File SCSIPTICommands.cpp, Line 450
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
    
0:55:16    #2 Text 0 File Isodoc.cpp, Line 6789
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate                : FALSE
    Write                   : TRUE
    Finalize CD             : FALSE
    Multisession            : TRUE
    Multisession type:      : Start multisession
    Burning mode            : DAO
    Mode                    : 1
    ISO Level               : 1 (Max. of 11 = 8 + 3 char)
    Character set           : ISO 9660
    Joliet                  : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path  : TRUE
    Write ISO9660 ;1 file extensions        : TRUE
    
0:55:16    #3 ISO9660GEN -11 File Geniso.cpp, Line 3349
    First writeable address = 0 (0x00000000)
    
0:55:17    #4 Text 0 File Burncd.cpp, Line 3563
    Turn on Disc-At-Once, using DVD media
    
0:55:17    #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
    FS Settings: using validator 'CUDFSettingsValidatorDVD'
    ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
    Changing UDF revision from '1.02' to '1.02'
    
0:55:17    #6 Text 0 File DlgWaitCD.cpp, Line 312
    Last possible write address on media:  2295103 (510:01.28, 4482MB)
    Last address to be written:             271919 ( 60:25.44,  531MB)
    
0:55:17    #7 Text 0 File DlgWaitCD.cpp, Line 324
    Write in overburning mode: NO (enabled: CD)
    
0:55:17    #8 Text 0 File DlgWaitCD.cpp, Line 2951
    Recorder: MATSHITA DVD-RAM UJ-850S, Media type: DVD+RW
     Disc Manufacturer ID: <INFODISC>, Media Type ID: <A10>, Product revision number: 1
     Disc Application Code: 0, Extended Information Indicators: 1
    
0:55:17    #9 Text 0 File DlgWaitCD.cpp, Line 499
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    
0:55:17    #10 Text 0 File ThreadedTransferInterface.cpp, Line 756
    Setup items (after recorder preparation)
     0: TRM_DATA_MODE1 ()
        2 indices, index0 (150) not provided
        original disc pos #0 + 271920 (271920) = #271920/60:25.45
        relocatable, disc pos for caching/writing not required/ required
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 271920 blocks [E: MATSHITA DVD-RAM UJ-850S]
    --------------------------------------------------------------
    
0:55:17    #11 Text 0 File ThreadedTransferInterface.cpp, Line 958
    Prepare [E: MATSHITA DVD-RAM UJ-850S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
     MCN: ""
     TOCType: 0x00; Session Closed, disc not fixated
     Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
       1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0     556892160, ISRC ""
    DAO layout:
    ===========
     ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
            0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
            0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
            0 |        1 |   1 |    0x41 |   271920 |        0 | 0x00
       271920 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
    
0:55:22    #12 Text 0 File SCSIPTICommands.cpp, Line 264
    Error on LockVolume: Немає дозволу на доступ.
 
    
0:55:22    #13 Text 0 File SCSIPTICommands.cpp, Line 287
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
    
0:55:22    #14 Text 0 File SCSIPTICommands.cpp, Line 240
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
    
0:55:22    #15 Text 0 File Burncd.cpp, Line 4362
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
    
0:55:22    #16 Phase 24 File dlgbrnst.cpp, Line 1767
    Caching of files started
    
0:55:22    #17 Text 0 File Burncd.cpp, Line 4484
    Cache writing successful.
    
0:55:22    #18 Phase 25 File dlgbrnst.cpp, Line 1767
    Caching of files completed
    
0:55:22    #19 Phase 36 File dlgbrnst.cpp, Line 1767
    Burn process started at 4x (5 540 Кб/с)
    
0:55:22    #20 Text 0 File ThreadedTransferInterface.cpp, Line 2675
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
    
0:55:22    #21 Text 0 File Cdrdrv.cpp, Line 10187
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
     Book Type: DVD+RW (9), Part Version: 1.1x (2)
     Disc Size: 120 mm,      Maximum Transfer Rate: <not specified> (F h)
     Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: re-writable
     Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
     Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
     End Physical Sector Number of Data Area:          26053F h
     Data in Burst Cutting Area (BCA) does not exist
      Disc Application Code: 0 / 0 h
      Extended Information indicators: 1 h
      Disc Manufacturer ID: INFODISC
      Media type ID: A10
      Product revision number: 1
      Number of Physical format information bytes in use in ADIP up to byte 63: 57
     Media Specific [16..783]:
        00 00 01 49 4E 46 4F 44 - 49 53 43 41 31 30 01 39    ...INFODISCA10.9
        23 00 9C 7C 5C 02 28 00 - 96 7E 70 02 28 00 9C 7B    #..|\.(..~p.(..{
        68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00    h.(.............
        01 00 17 38 00 28 8B 46 - 02 2C 00 2F 8A 3A 02 2C    ...8.(.F.,./.:.,
        00 2E 8C 3C 02 2C 28 35 - 50 00 20 00 40 20 00 00    ...<.,(5P...@...
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
    
0:55:22    #22 Phase 98 File dlgbrnst.cpp, Line 1767
    Start formatting disc before burning
    
0:55:46    #23 SPTI -1106 File SCSIPassThrough.cpp, Line 215
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
    CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00  
    Sense Key:  0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 19 10 73 03  
    
0:55:46    #24 Phase 101 File dlgbrnst.cpp, Line 1767
    Formatting disc failed
    
0:55:46    #25 Text 0 File DVDPlusRW.cpp, Line 675
    Start write address at LBA 0
    DVD high compatibility mode: Yes
    
0:55:46    #26 CDR -1106 File ThreadedTransferInterface.cpp, Line 1682
    Power calibration error
    E: MATSHITA DVD-RAM UJ-850S
    
0:55:46    #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1682
    Could not perform start of Disc-at-once
    
0:55:46    #28 Text 0 File DVDPlusDualLayer.cpp, Line 1424
    SetDriveCaps: Set LAST LBA of layer 1 to 0
    
0:55:47    #29 Text 0 File ThreadedTransfer.cpp, Line 273
    Pipe memory size 83836800
    
0:55:47    #30 Phase 38 File dlgbrnst.cpp, Line 1767
    Burn process failed at 4x (5 540 Кб/с)
    
0:55:47    #31 Text 0 File SCSIPTICommands.cpp, Line 287
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
    
0:55:50    #32 Text 0 File Cdrdrv.cpp, Line 11444
    DriveLocker: UnLockVolume completed
    
0:55:50    #33 Text 0 File SCSIPTICommands.cpp, Line 450
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
    
 
Existing drivers:
 
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

Всего записей: 111 | Зарегистр. 29-06-2006 | Отправлено: 02:19 15-10-2008
JAlex18



Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Trotskiy1
Думаю проблема в драйверах

Всего записей: 362 | Зарегистр. 22-05-2008 | Отправлено: 14:41 26-10-2008
Открыть новую тему     Написать ответ в эту тему

Компьютерный форум Ru.Board » Hardware » Оптические носители информации » MATSHITA UJ 850


Реклама на форуме Ru.Board.

Powered by Ikonboard "v2.1.7b" © 2000 Ikonboard.com
Modified by Ru.B0ard
© Ru.B0ard 2000-2024

BitCoin: 1NGG1chHtUvrtEqjeerQCKDMUi6S6CG4iC

Рейтинг.ru