bozer
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Please select drive number:3
VIC file: sf_flash_id_rommode.dat
Drive: 3(USB)
Model: SandForce{200026BB}
Fw : 402ABBR0
MFB size: 249792 bytes (488 sectors)
Used config: 27423
MFB download complete
ReDetect drive...
Model: SandForce
Fw : 506ABBM0
Два одинаковых винта... Это лог из безвременно почившего... снятый sf_flash_id_rommode
--- SandForce specific ---
HW Revision : 400026BB (B02)
Try to unlock the drive...
Check unlock state...
Unlock failed! Possible this ssd not support.
Panic Dumps : 4
Read Dump 0: complete
Panic Dump 0 Accumulative Time: 13 days 6:45:01
Panic Dump 0 Total Up Time : 13 days 6:45:01
Read Dump 1: complete
Panic Dump 1 Accumulative Time: 13 days 6:45:01
Panic Dump 1 Total Up Time : 13 days 6:45:01
Read Dump 2: complete
Panic Dump 2 Accumulative Time: 13 days 6:45:01
Panic Dump 2 Total Up Time : 13 days 6:45:01
Read Dump 3: complete
Panic Dump 3 Accumulative Time: 13 days 6:45:01
Panic Dump 3 Total Up Time : 13 days 6:45:01
И собственно из еще живого.... Снятый
v0.42a
Drive: 1(ATA)
Model: KINGSTON SV300S37A240G
Fw : 60AABBF0
Size : 228936 MB
--- SandForce specific ---
Signature : 138-0-33511
HW Revision : 500026BB (B04)
Try to unlock the drive (default)...
Drive unlocked (default)!
FW : [60AABBF0 ]
FW string : [B:FW_PPRO_6_0_A_20160216_1149268:FW_PPRO_6_0_A_5th_Release-1161497 ]
Config file : [cfg/cfg_MLC_Toshiba_128Gb_FT16B08UCT1-CA_2Q_2C_2D_S ]
ROM Revision: [400 ]
NAND ID : 0x98, 0x3a, 0x94, 0x93, 0x76, 0x51, 0x0, 0x0
Page Size : 17664
NAND CE : 2
Sector/Page : 8
Die/CE : 2
Block/Die : 1024
Page/Block : 256
Raw Size : 536870912
NAND Max EC : 3000
Max PE Cycles : 3000
Cur PE Cycles : 8
Life In Seconds : 0 (Not Set)
LBA Size : 468862128
Sector Size : 512
Sector Align : +0
NAND ID : 0x98,0x3a
Serial Output Control : Default(Off)
Erase R Block : Disable
Panic Handling Enabled : Disable
Panic On SATA Error : Disable
Write Throttling Test Mode: Disable
R.A.I.S.E. : Enable
Flash CE : 16
Bank00: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
Bank01: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
Bank02: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
Bank03: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
Bank04: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
Bank05: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
Bank06: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
Bank07: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
Bank08: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
Bank09: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
Bank10: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
Bank11: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
Bank12: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
Bank13: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
Bank14: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
Bank15: 0x98,0x3a,0x94,0x93,0x76,0x51,0x8,0x4 - Toshiba 15nm MLC 16k 128Gb/CE 128Gb/die 2Plane/die
UART freq : 0
SATA Status Coalesting : 0
Compressible data performance tuning option : 0 (no tuning for compr. data)
Serial Output Control : 0 (Default)
Write Speed Limit : 0 (Off)
Led Settings
Activity LED Polarity : 0 (Normal)
Fault LED Polarity : 0 (Normal)
LED Blink Rate : 0 (250ms)
Power Managment Settings
Power Management Version : 2 (B01)
Active State Power Mode : 0 (Default)
DIPM Behavior in Active State : 0 (Default)
HIPM Behavior in Active State : 0 (Default)
Auto Idle Enable : 0 (Default)
Idle State Power Mode : 0 (Default)
DIPM Behavior in Idle State : 0 (Default)
HIPM Behavior in Idle State : 0 (Default)
Standby State Power Mode : 0 (Default)
DIPM Behavior in Standby State : 0 (Default)
HIPM Behavior in Standby State : 0 (Default)
Sleep State Power Mode : 4 (PS6)
DIPM Behavior in Sleep State : 0 (Default)
HIPM Behavior in Sleep State : 0 (Default)
Auto slumber timer : 0
CMU power down : 0 (Default)
Dual-align BIST Feature : 0 (Default)
Temperature Sensor Settings
Sensor 1:
Device ID : 1 (LM75 or TMP102)
Device Address : 0
Max Temperature Threshold Level 1 Entry Point (MT1) : 70n
Max Temperature Threshold Level 2 Entry Point (MT2) : 85n
Min Temperature Threshold (LT1) : 0n (Default - 0C)
Max Temperature Threshold Behavior for MT1 (MT1B) : 2 (Temperature Threshold Event Log)
Max Temperature Threshold Behavior for MT2 (MT2B) : 2 (Temperature Threshold Event Log)
Min Temperature Threshold Behavior (LT1B) : 2 (Temperature Threshold Event Log)
Max Temperature Threshold Level 1 Return Point (MTR1): 0 (Default - MT1)
Sensor 2:
Device ID : 0 (Default)
Device Address : 0
Max Temperature Threshold Level 1 Entry Point (MT1) : 0
Max Temperature Threshold Level 2 Entry Point (MT2) : 0
Min Temperature Threshold (LT1) : 0
Max Temperature Threshold Behavior for MT1 (MT1B) : 0 (Default)
Max Temperature Threshold Behavior for MT2 (MT2B) : 0 (Default)
Min Temperature Threshold Behavior (LT1B) : 0 (Default)
Max Temperature Threshold Level 1 Return Point (MTR1): 0
Security Erase Options
Security Erase Behavior : 2 (Expanded)
Enhanced Security Erase Behavior (Military Erase) : 0 (Default)
SATA Command and Firmware Options
Flush Cache Behavior : 0 (Default)
ATA Security Set Enable : 1 (Off)
Spread Spectrum Clocking Enable : 0 (Default)
SATA Link Handling on Reboot : 0 (Default)
ACS2 Support : 0 (Default)
Failed Secure Unlock Delay Enable : 0 (Default(No delay))
Seek Complete in Error Status : 0 (Default)
Read Long with Retry and without Retry : 0 (Default)
Read Sectors without Retry : 0 (Default)
Write DMA without Retry : 0 (Default)
Write Long with Retry and without Retry : 0 (Default)
Max SATA Link Rate : 0 (Default)
Deterministic Trim Setting : 0 (Default)
Controller Drive Strength Rate : 0 (Default)
PHY Setting : 0 (Default)
Controller Slew Rate : 0 (Default)
Put SIG FIS Delay : 0 (Default)
Set Multiple Handling : 0 (Default)
TRIM Timer Abort : 0 (Enable(Default))
Trim Support/Setting Word 169 Bit 0 : 0 (Default(Firmware default setting))
RDD1 Optimization : 0 (Default)
Security Unlock Drive : 0 (Default(Compare Master Password))
Power Throttling Options
Average Power Level 0-100 : 0
Maximum Power Level 0-100 : 0
Power Throttling Upon Unsafe Shutdown : 0 (Default)
Dynamic Read Scrub
Read Scrub Enabled : 0 (Default (Enabled))
Dynamic Read Scrub End Range1 : 0
Dynamic Read Scrub Rate Range1 : 0
Dynamic Read Scrub End Range2 : 0
Dynamic Read Scrub Rate Range2 : 0
Dynamic Read Scrub End Range3 : 0
Dynamic Read Scrub Rate Range3 : 0
Dynamic Read Scrub End Range4 : 0
Dynamic Read Scrub Rate Range4 : 0
Low Level Format Settings
Number of entries in Max LBA Setting : 1
Sub-Sector Size [0] : 512
Pattern Size [0] : 2
Sub-Sector and Patterns per sector [0] : 0
Max LBA Count [0] : 468862128
Host Protected Area
Host Protected Access : 0 (Always Reset HPA State On COMRESET)
End of Life Behavior
Enable End of Life : 0 (Default (EOL Enabled))
EOL Threshold 1 Type : 0 (Default (SSD Life Left))
EOL Threshold 1 Percentage : 0
EOL Threshold 1 Behavior : 0 (Default (Light Write Throttling))
EOL Threshold 2 Type : 0 (Default (SSD Life Left))
EOL Threshold 1 Percentage : 0
EOL Threshold 1 Behavior : 0 (Default (Heavy Write Throttling))
CDU Smart settings: defined 4 attributes
## Attr IntId Tresh Flag
00 0xf4 0xfa 10 0x00
01 0xeb 0x00 0 0x00
02 0xbd 0x12 0 0x00
03 0xe7 0x19 11 0x00
User Defect list entry: 0
Panic Dumps : 0
Panic Dumps list:
Idx Accurev SyncCode UnlockLevel Size DataSize EPA Log Ok CRC Ok
0 -1 0xffffffff 0xffffffff -1 -1 0x20040002 0x0000 0x0000
1 -1 0xffffffff 0xffffffff -1 -1 0x00040102 0x0000 0x0000
2 -1 0xffffffff 0xffffffff -1 -1 0x20040102 0x0000 0x0000
3 -1 0xffffffff 0xffffffff -1 -1 0x00040202 0x0000 0x0000
MST settings not exist.
MST result not exits.
Меня очень сильно интересуют вот эти две строки
FW : [60AABBF0 ]
FW string : [B:FW_PPRO_6_0_A_20160216_1149268:FW_PPRO_6_0_A_5th_Release-1161497 ]
Config file : [cfg/cfg_MLC_Toshiba_128Gb_FT16B08UCT1-CA_2Q_2C_2D_S ]
Может кто качнет??? С меня плюсик. Найти нигде не могу.... В версиях ниже моей памяти нет и собственно FAIL
|
