panda2019
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Цитата:| скрриншот SMART покажите хотя бы |
smartctl 5.43 2012-06-30 r3573 [i686-linux-3.8.2] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K320
Device Model: Hitachi HTS543212L9A300
Serial Number: 080710FB0B00LGC1VZ7A
LU WWN Device Id: 5 000cca 569c0d9a2
Firmware Version: FBBOC40C
User Capacity: 120 034 123 776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3f
Local Time is: Mon Jul 29 16:35:50 2013 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 52) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 090 090 062 Pre-fail Always - 3932160
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 0
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 3021
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 092 092 000 Old_age Always - 3504
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 2889
191 G-Sense_Error_Rate 0x000a 099 099 000 Old_age Always - 2
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 111
193 Load_Cycle_Count 0x0012 093 093 000 Old_age Always - 70006
194 Temperature_Celsius 0x0002 166 166 000 Old_age Always - 33 (Min/Max 8/52)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 233
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 9
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 559 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 559 occurred at disk power-on lifetime: 3500 hours (145 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 5f 32 6a e0 Error: UNC 1 sectors at LBA = 0x006a325f = 6959711
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 58 32 6a e0 08 04:31:29.100 READ DMA
27 00 00 00 00 00 e0 08 04:31:29.100 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 08 04:31:29.100 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 04:31:29.100 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 04:31:29.100 READ NATIVE MAX ADDRESS EXT
Error 558 occurred at disk power-on lifetime: 3500 hours (145 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 5f 32 6a e0 Error: UNC 1 sectors at LBA = 0x006a325f = 6959711
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 58 32 6a e0 08 04:31:25.000 READ DMA
27 00 00 00 00 00 e0 08 04:31:25.000 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 08 04:31:25.000 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 04:31:25.000 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 04:31:25.000 READ NATIVE MAX ADDRESS EXT
Error 557 occurred at disk power-on lifetime: 3500 hours (145 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 5f 32 6a e0 Error: UNC 1 sectors at LBA = 0x006a325f = 6959711
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 58 32 6a e0 08 04:31:20.900 READ DMA
27 00 00 00 00 00 e0 08 04:31:20.900 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 08 04:31:20.900 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 04:31:20.900 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 04:31:20.900 READ NATIVE MAX ADDRESS EXT
Error 556 occurred at disk power-on lifetime: 3500 hours (145 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 5f 32 6a e0 Error: UNC 1 sectors at LBA = 0x006a325f = 6959711
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 58 32 6a e0 08 04:31:16.800 READ DMA
27 00 00 00 00 00 e0 08 04:31:16.800 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 08 04:31:16.800 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 04:31:16.700 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 04:31:16.700 READ NATIVE MAX ADDRESS EXT
Error 555 occurred at disk power-on lifetime: 3500 hours (145 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 5f 32 6a e0 Error: UNC 1 sectors at LBA = 0x006a325f = 6959711
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 58 32 6a e0 08 04:31:12.600 READ DMA
27 00 00 00 00 00 e0 08 04:31:12.600 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 08 04:31:12.600 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 04:31:12.600 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 04:31:12.600 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Вот полнй отчет |
