Ремонт SSD накопителей на контроллерах SandForce (часть 3) - [10] :: Магнитные носители информации

+12 это для tlc чипов

Добавлено:

SF_Genesis-v1.7.9.001
--------------------------------------------------------------------------------------------
•    TOOL-1323 Config Manager field for HP specific form factor identify setting

--------------------------------------------------------------------------------------------

SF_Genesis-v1.7.9
--------------------------------------------------------------------------------------------
•    TOOL-1311 HP single binary file creation through package OEM tool
•    TOOL-1314 Identify Data entry only can set one bit
•    TOOL-1315 Some Genesis feature do not work properly
•    TOOL-1318 Add Port ID in Genesis MST -Get_Detailed_Status Log
•    TOOL-1319 Need to add a new CDU control in Genesis

--------------------------------------------------------------------------------------------

SF_Genesis-v1.7.8
--------------------------------------------------------------------------------------------
•    TOOL-1306 [Genesis] Add field for sanitize feature support filed in genesis tool
•    TOOL-1307 To add Read Error counts in the error summary of MST get detail status log
•    TOOL-1310 [Genesis1.76.002] Run Genesis command 'Abort while MST running' run failed.

--------------------------------------------------------------------------------------------

SF_Genesis-v1.7.7
--------------------------------------------------------------------------------------------
•    TOOL-1283 Added MEM-159 Hynix config to XML patch file(Configuration Manager)
•    TOOL-1285 The time out value after Flashware download extended to 8 seconds from 5 seconds
•    TOOL-1298 Fixed Genesis to display Flash Test result in certain error codes
•    TOOL-1305 Added CDU entry for Read Scrub Threshold setting (Configuration Manager)
•    TOOL-1301 Added entry for Word 69 bit 7 for IEEE 1667 edrive setting in Configuration Manager

--------------------------------------------------------------------------------------------

SF_Genesis-v1.7.0.00920130612 (and build 010)
--------------------------------------------------------------------------------------------
•    TOOL-1067 Add CDU entry for Set Max Address behavior when SSP enabled
•    TOOL-1066 Add configurable options for security unlock master password enable/disable in config manager
•    TOOL-1068 -CHECK_SETUP fails on FC 17
•    TOOL-1070 Add validation check libata.allow_tpm=1 in grub configuration file
•    TOOL-1069 Warning: Unrecognized configuration field FIRMWARE_OVERRIDE_VERSION_ORIGINAL

--------------------------------------------------------------------------------------------
SF_Genesis-v1.7.0.00720130603
--------------------------------------------------------------------------------------------
•    TOOL-1054 PSID write/verify support in Genesis

--------------------------------------------------------------------------------------------
SF_Genesis-v1.7.0.00520130530
--------------------------------------------------------------------------------------------
    TOOL-1054 PSID write/verify support in Genesis
    1.    Command line support only
    2.    GUI support to be included in 1.7.0.007
    3.    There is a new dashboard screen for setting the TCG Pin 0xC612 but it is not operational in this alpha release.
    TOOL-1060 Re-naming "Word 169 Bit 0" to "TRIM Support" and relocating the same under CDU Values/SATA Command and Firmware Options
    Tool-1058 TCG Opal Provisioning File in Dashboard

--------------------------------------------------------------------------------------------
SF_Genesis-v1.7.0.00320130521
--------------------------------------------------------------------------------------------
    TOOL-1063 Accomodate Hynix BBD fields in Genesis Configuration Manager
    TOOL-1060 Need a new option in configuration manager to select between the new RDD algorithm
(Default) and the old RDD alogorithm

--------------------------------------------------------------------------------------------
SF_Genesis-v1.7.0.00120130513
--------------------------------------------------------------------------------------------
    TOOL-1032 Request Genesis to have a command to program drive serial number
    TOOL-1057 Request Genesis to have enable/disable RAISE option in PROCESS_SSD
    TOOL-1041 Defect entries should be matched between Firmware & Genesis
    TOOL-1053 FW fails to write GDL, Genesis confirms successful
    TOOL-1062 Change the default behaviour of Read Grown Defect List to C613 instead of C805

Модерирует : Akam1, Dr_StandBy, vertex4
Akam1 (07-08-2019 07:22): http://forum.ru-board.com/topic.cgi?forum=84&topic=5471	Версия для печати • Подписаться • Добавить в закладки
Страницы: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117