Dekker
Moderator | Редактировать | Профиль | Сообщение | ICQ | Цитировать | Сообщить модератору
01-03 pretreatment (may clear all FW) hard disk installation and servo calibration tests, including 01-02
01 - Manufacturing temporary log
02 - Formatting and test error log, heads and circuit calibration test
03 - servo correction information
04-0F servo test (including scanning defective rail)
04 - oblique wave loading / unloading test
05 - Sensor Lag Test
06 - head switching test
07 - RUNOUT compensation Test
08 - When checking the servo error writing on the disk 2T type
09 - head low-flying display
0A - Head stability testing
0C - read servo defect test position
0D - re-learn RRO ZAP test
0E - Looking Skip cylinder test (not yet realized)
0F - currently written test
10-1F-channel optimization tests, heads, and calibration circuit Test
10 - 1E, 2A - 2E adaptation region # (last area) 0 through - all of the heads
1F - show suitability, VCO, and DIODE temperature setting
20-2F servo parameter debug
2F - FIR adaptive display settings, servo performance Verification Test
20, TEST 60 - Servo Visits
21, TEST 25 - RRO / NRRO Test
23 - Start / Stop (10)
24 - Start / Stop (2,000 times)
29 - servo defect scanning
30-3E defect scanning, analysis, processing (accurate scanning for bad sectors and shield), defect finding and redistribution test
30 - Verify that all disk groups to read, AT-class
31 - wedge defect scanning. heads 0-1 without reading level, 50 W class
32 - Wedge defect scanning head 2-3 without reading stage, grade 50 W
36 - 0-1 wedge on the scan head to find out the defects located
37 - 2-3 wedge on the scan head to find out for localizing defects
3A - Use a repeatable read all of the heads polished and defect testing, repeated 50 times
3B-establish defect table; filling damaged head 0,1
3C-establish defect table; filling damaged head 2,3
3D-establish defect table; filled by loss of head 4,5
3E-establish defect table; filling damaged head 6,7
3F-loopback test, written by testing
40-4E logically work test (without any repair, just as the factory can * test, as long as In any error is found on a process that the hard drive does not
fit the factory)
error rate performance test
40 - Start / Stop (10)
41 - Track intrusive
42 - SPIN STAND simulator - Regional minor bug green
43 - RAM Test
46 - Data compiled ratio
47 - Cold write / erase tracks show
48 - error rate, write-through
49 - write / read / compare (zero style)
4A-compensation coefficient detection
4B-read
4B - All tracks written show cold
4C-head flying height Measuring
4D-collected data automatically FA
accumulation 4E-checking health and creating self-summary
or 50 4F
4F-Failed Disk Test
50 - through the disk test
special test
51 - Error Rate
52 - RRO test disk group to write
54 - Pick crooked measuring
55 - one million random read and write
56 - write / read / compare (zero style)
61,62,63 - Manufacturing Reliability Test
64 - Head stability testing
65,66,67 - Media Delay Test |
Всего записей: 4655 | Зарегистр. 04-06-2002 | Отправлено: 13:01 15-08-2012 | Исправлено: SRUTSSSSSSSS80, 22:39 30-07-2013 |
|
