Smyg11
Full Member | Редактировать | Профиль | Сообщение | ICQ | Цитировать | Сообщить модератору
<MFB> Special Bad Block Scan: Valid 0 NumBytes 448 numOnes 1
<MFB> Read Device ID: 89 88 24 4B A9 00
<MFB> == Format mode ONE align 0 ==
<MFB> ---> Sector size 0 bytes L-Page size 4096 bytes <---
<MFB> Flash ID Check
<MFB> Creating New Root
<MFB> Bad Block Discovery ...
<MFB> Number of Bad Blocks for SE/plane/lane
<MFB> SE pl: ln0 ln1 ln2 ln3
<MFB> 0 0: 1 1 1 1
<MFB> 0 1: 1 1 1 1
<MFB> Total Bad Block number is: 8 out of 16384
<MFB> Added donor[0]= 45
<MFB> Enabling Remap Unit...
<MFB> Erasing All Virgin Blocks...
<MFB> No Host GDL!
<MFB> Creating the Root Record ...
<MFB> Input PE: 0
<MFB> Drive RDD:100000 RDD Low:100000, PE: 3000 Options:0000 Warranty: 0
<MFB> Format: WP Circuit Not Present (dynamic)
<MFB> CreateAndVerifyRoot: fid=2 ibidx=6 buf=3fff082c buflen=3876
<MFB> CreateAndVerifyRoot: fid=2 ibidx=7 buf=3fff082c buflen=3876
<MFB> CreateAndVerifyRoot: fid=1 ibidx=2 buf=3fff0814 buflen=24
<MFB> CreateAndVerifyRoot: fid=1 ibidx=3 buf=3fff0814 buflen=24
<MFB> CreateAndVerifyRoot: fid=1 ibidx=4 buf=3fff0814 buflen=24
<MFB> CreateAndVerifyRoot: fid=1 ibidx=5 buf=3fff0814 buflen=24
<MFB> CreateAndVerifyRoot: fid=0 ibidx=0 buf=3fff18ac buflen=3876
<MFB> CreateAndVerifyRoot: fid=0 ibidx=1 buf=3fff18ac buflen=3876
<MFB> Initialize the Root ...
<MFB> PPRO-15147 (LION-1540): Retired Root IBlocks=0.
Found a valid Config Record.
Bus Width [bits] = 32
Number of CE = 1
Number of Die / CE = 1
CE CFG (Bus Mode) = 1-DIMM
Number of Bus = 1
Flash Page Size = 8192
Flash Page / Block = 256
Number of Block / Die = 2048
E-Page Size = 512
ECC Bytes = 27
ECC Correction Power = 16
<MFB> Low PE Flashware File Feature : NO
<MFB> Coalesce Compression Feature : YES
<MFB> Single Plane Remap Feature : YES
<MFB> RootInit: WP Circuit Not Present (dynamic)
<MFB> EVT LOG. Panic Dump slot 0 epa 0x00040002
<MFB> EVT LOG. Panic Dump slot 1 epa 0x00048002
<MFB> EVT LOG. Panic Dump slot 2 epa 0x00050002
<MFB> EVT LOG. Panic Dump slot 3 epa 0x00058002
<MFB> ------> Root Record Versions: CONFIG=1, PRR=1 (ib=3,pp=1), SRR=1 (ib=7,pp=1) <------
<MFB> UE: epa=00060000 laneMask=0xF bufId=89 ffBytes=9163 numEpages=17
<MFB> Saving Bad Block List ...
<MFB> UE: epa=00068000 laneMask=0xF bufId=90 ffBytes=9163 numEpages=17
<MFB> UE: epa=00070000 laneMask=0xF bufId=91 ffBytes=9163 numEpages=17
<MFB> Saving Grown Defect List ...
<MFB> UE: epa=00078000 laneMask=0xF bufId=92 ffBytes=9163 numEpages=17
<MFB> Initializing SMART root file ...
<MFB> UE: epa=00080000 laneMask=0xF bufId=93 ffBytes=9163 numEpages=17
<MFB> UE: epa=00088000 laneMask=0xF bufId=94 ffBytes=9163 numEpages=17
<MFB> InitSmartLogRootFile is done
<MFB> Initializing XTS Global Keys ...
<MFB> UE: epa=00090000 laneMask=0xF bufId=95 ffBytes=9163 numEpages=17
<MFB> Initializing Life Table ...
<MFB> Saving Life Table ...
<MFB> UE: epa=00098000 laneMask=0xF bufId=96 ffBytes=9163 numEpages=17
<MFB> Set LBA Offset to 0 ...
<MFB> Clearing the Map Table ...
<MFB> Clearing the SIN Table ...
<MFB> Saving the MAP Table1 ...
<MFB> UE: epa=000A0000 laneMask=0xF bufId=97 ffBytes=9163 numEpages=17
<MFB> Saving the MAP Table2 ...
<MFB> UE: epa=000A8000 laneMask=0xF bufId=98 ffBytes=9163 numEpages=17
<MFB> Saving the SIN Table ...
<MFB> UE: epa=000B0000 laneMask=0xF bufId=99 ffBytes=9163 numEpages=17
<MFB> Saving the Remap Table ...
<MFB> UE: epa=000B8000 laneMask=0xF bufId=100 ffBytes=9163 numEpages=17
<MFB> Verifying the Remap Table ...
<MFB> Saving the RD Table ...
<MFB> UE: epa=000C0000 laneMask=0xF bufId=128 ffBytes=9163 numEpages=17
<MFB> Saving the ID Data ...
<MFB> UE: epa=000C8000 laneMask=0xF bufId=129 ffBytes=9163 numEpages=17
<MFB> Saving the Free Table ...
<MFB> UE: epa=000D0000 laneMask=0xF bufId=131 ffBytes=9163 numEpages=17
<MFB> Finalizing the ROOT ...
<MFB> UE: epa=000D8000 laneMask=0xF bufId=132 ffBytes=9163 numEpages=17
<MFB> Factory Setup finished; you may reboot or download Flashware now.
<MFB> UE: epa=000E0000 laneMask=0xF bufId=133 ffBytes=9163 numEpages=17
<MFB> Firmware Fuse=0xFC00FC00, computed value=0xFC00
<MFB> Downloading eFuse-independent image (device eFuse = fc00)
<MFB> Downloading unstamped image, preserving current FW stamp 00000000:00000000:0000000000000000
<MFB> PPRO_STAMP FROM IMAGE: 00 00 00 00 00 00 00 00
<MFB> STAMP OK at offset 0x000000
<MFB> RSA OK
<MFB> UE: epa=000E8000 laneMask=0xF bufId=136 ffBytes=9163 numEpages=17
<MFB> Validate SHA on Input Stream Microcode: PASS!
<MFB> Did not find appendix signature.
<MFB> Info 1: not a valid appendix.
<MFB> Validate SHA on Root File 3: PASS!
<MFB> UE: epa=000F0000 laneMask=0xF bufId=214 ffBytes=9163 numEpages=17
<MFB> ILL Dup SRC=4(IBIDX ff,IBA 62620) to DST=5 (IBIDX 1a,IBA 3c)!!!
<MFB> UE: epa=000F8000 laneMask=0xF bufId=215 ffBytes=9163 numEpages=17
<MFB> ILL Dup SRC=3(IBIDX 19,IBA 3a) to DST=4 (IBIDX 1b,IBA 3e)!!!
<MFB> UE: epa=00100000 laneMask=0xF bufId=37 ffBytes=9163 numEpages=17
<MFB> ILL Dup SRC=3(IBIDX 19,IBA 3a) to DST=6 (IBIDX 1c,IBA 40)!!!
<MFB> Validate SHA on Root File 4: PASS!
<MFB> Download Microcode PASS!
<MFB> SATA_UPDATE_COMPLETE
<MFB> Warm Start (state=14) - Resetting ALL hardware blocks!
[ROM] Chip ID 0x200026BB
*** ROM Rev 20D Dec 20 2010 Build 288571 ***
[ROM] Try BCH[1]: CP=33 EC=54 EP=485
[ROM] Load CRP
[ROM] Load FWR |
Всего записей: 531 | Зарегистр. 29-03-2016 | Отправлено: 23:28 24-05-2016 | Исправлено: Smyg11, 11:56 25-05-2016 |
|
