Перейти из форума на сайт.

НовостиФайловые архивы
ПоискАктивные темыТоп лист
ПравилаКто в on-line?
Вход Забыли пароль? Первый раз на этом сайте? Регистрация
Компьютерный форум Ru.Board » Hardware » Магнитные носители информации » Ремонт SSD накопителей на контроллерах SandForce

Модерирует : Akam1, Dr_StandBy, vertex4

Akam1 (23-12-2016 01:32): http://forum.ru-board.com/topic.cgi?forum=84&topic=5239  Версия для печати • ПодписатьсяДобавить в закладки
На первую страницук этому сообщениюк последнему сообщению

   

exwein

Full Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  
 SandForce Genesis Utility v1.5.21.20110919-fc14-32bit  
 SF_Core Library: v1.7.0.20110919-fc14-32bit  
 
 Copyright 2010-2011, SandForce Inc., All Rights Reserved Worldwide.  
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  
[Thu 07/21/2016 17:59:45] - SF_Genesis has been invoked with the following parameters:
 
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                      argv[1]: -PROCESS_SSD
                      argv[2]: 2:0:0:0
                      argv[3]: /home/SSD_recovery/SSD/firmware/5.8.2/lic/asiacom_SF-2000_20120629_lic/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
                      argv[4]: /home/SSD_recovery/SSD/firmware/5.8.2/lic/asiacom_SF-2000_20120629_lic/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22320.0.driveconfig
                      argv[5]: 12345
                      argv[6]: www_123
                      argv[7]: LOG=/home/SSD_recovery/SSD/firmware/22320.LOG
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 
[Thu 07/21/2016 17:59:45] - Instructing the operating system to purge any existing cached data for device: '2:0:0:0'
[Thu 07/21/2016 17:59:56] - Issuing a discovery command for device: '2:0:0:0'
[Thu 07/21/2016 18:00:02] - Discovery command completed...
[Thu 07/21/2016 18:00:02] - Waiting 5 seconds for the system to settle...
[Thu 07/21/2016 18:00:07] - Device designation string '2:0:0:0' is mapped to node '/dev/sg0'
[Thu 07/21/2016 18:00:07] - Proceeding to process SSD device with the following parameters:
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
              DeviceName = /dev/sg0
    MFP Package Filename = /home/SSD_recovery/SSD/firmware/5.8.2/lic/asiacom_SF-2000_20120629_lic/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
      Configuration File = /home/SSD_recovery/SSD/firmware/5.8.2/lic/asiacom_SF-2000_20120629_lic/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22320.0.driveconfig
              Serial No. = 12345
         World Wide Name = www_123
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
[Thu 07/21/2016 18:00:07] - Successfully received the IDENTIFY data from the drive...
[Thu 07/21/2016 18:00:28] - Successfully opened the package: /home/SSD_recovery/SSD/firmware/5.8.2/lic/asiacom_SF-2000_20120629_lic/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Thu 07/21/2016 18:00:28] - Successfully extracted *.DriveConfig file: /home/SSD_recovery/SSD/firmware/5.8.2/lic/asiacom_SF-2000_20120629_lic/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22320.0.driveconfig
[Thu 07/21/2016 18:00:28] - Extracted Config_ID: 1 (22320) in DriveConfig file: /home/SSD_recovery/SSD/firmware/5.8.2/lic/asiacom_SF-2000_20120629_lic/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/22320.0.driveconfig
[Thu 07/21/2016 18:00:28] - Extracted SerialOutputControl: 0
[Thu 07/21/2016 18:00:28] - Successfully extracted Config record: 22320
[Thu 07/21/2016 18:00:28] - Successfully extracted flashware image: 22320_fw_cl_mlc_Micron_64Gb_MT29F64G08CBAAAWP_2Q_1C_1D_PP_R00984_s512.vic
[Thu 07/21/2016 18:00:28] - Successfully extracted manufacturing image: 22320_mf_mlc_Micron_64Gb_MT29F64G08CBAAAWP_2Q_1C_1D_PP_R00984_s512.vic
[Thu 07/21/2016 18:00:28] - Proceeding in ROM mode, download feature 1...
[Thu 07/21/2016 18:00:56] - Successfully downloaded MFB to the drive...
[Thu 07/21/2016 18:00:56] - Waiting (5 sec) for the drive to settle...
[Thu 07/21/2016 18:01:01] - Successfully received the IDENTIFY data from the drive...
[Thu 07/21/2016 18:01:01] - Firmware revision reported to be: '582ABBM0'.  This indicates MFB download was successful.
[Thu 07/21/2016 18:01:01] - Successfully enabled SMART capabilities...
[Thu 07/21/2016 18:01:02] - Successfully issued a diagnostic unlock...
[Thu 07/21/2016 18:01:02] - Performing the flash test of block 0 (0x0000)...
[Thu 07/21/2016 18:01:07] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
 Flash Test Parameters:                              
-----------------------------------------------------------------------------
               Block Count: 0                      
                Page Count: 1                      
                 Bus Count: 2                      
        Chip Enabled Count: 1                      
                 Die Count: 1                      
                Lane Count: 3                      
               Plane Count: 2                      
-----------------------------------------------------------------------------
 Results Notes:                                      
-----------------------                              
   N1 - At least one page tested and passed with no bit errors.
   N2 - No test data available.  Test may have aborted, or failed during the testing.
   N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
   N4 - At least  one erased page tested had bit error rate greater than half the correction power.
   N5 - Walking zeros test failed.
   N6 - Walking ones test failed.
   N7 - Block contained factory bad block markings and testing was skipped.
   N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
   N9 - Block in plane 0 was marked as a factory bad block.
  N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
  N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
 
 
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus  | CE   | Die  | Lane | Value  | Result Notes                               | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 0    | 0x0374 | N4,N5,N6,N8,N10                            |    FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 1    | 0x0374 | N4,N5,N6,N8,N10                            |    FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 2    | 0x0374 | N4,N5,N6,N8,N10                            |    FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 0    | 0x0374 | N4,N5,N6,N8,N10                            |    FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 1    | 0x0374 | N4,N5,N6,N8,N10                            |    FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 2    | 0x0374 | N4,N5,N6,N8,N10                            |    FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
 
 
-----------------------------------------------------------------------------
  Total Number of test results: 6                      
            Number of failures: 6                      
         Number of Passed with warnings: 0                      
      No. Passed without warnings: 0                      
-----------------------------------------------------------------------------
 
 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 

Всего записей: 599 | Зарегистр. 29-03-2016 | Отправлено: 15:09 21-07-2016
   

На первую страницук этому сообщениюк последнему сообщению

Компьютерный форум Ru.Board » Hardware » Магнитные носители информации » Ремонт SSD накопителей на контроллерах SandForce
Akam1 (23-12-2016 01:32): http://forum.ru-board.com/topic.cgi?forum=84&topic=5239


Реклама на форуме Ru.Board.

Powered by Ikonboard "v2.1.7b" © 2000 Ikonboard.com
Modified by Ru.B0ard
© Ru.B0ard 2000-2024

BitCoin: 1NGG1chHtUvrtEqjeerQCKDMUi6S6CG4iC

Рейтинг.ru