Amateur_new
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Не прошивается
Пробовал на материнке с включенным AHCI и с отключенным
Подавал команду /SF_Genesis -FIND_SF_DRIVES -ALL
показывает что диск в РОМ моде
эти команды почемуто вообще не выполняются:
/SF_Genesis -READ_FLASH_ID 0:0:0:0
/SF_Genesis -SECURE_ERASE -NORMAL 0:0:0:0
Пробовал DOWNLOAD_MFB
Посмотрите, пожалуйста, может что подскажите
Вот лог:
<?xml version = "1.0"?>
<Genesis_Log>
<Log_Body>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Overall Summary:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Start Time: Sat, 11/21/2015 @ 21:20:23
End Time: Sat, 11/21/2015 @ 21:21:45
OverallResult: FAIL
ExitCode: (0x10090014:SF_GENESIS_FW_DOWNLOAD_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Environment Settings:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Input Parameters:
argv[1]: -DOWNLOAD_MFB
argv[2]: 0:0:0:0
argv[3]: /home/ssa/33119_582/FW_582--0/FW_582.0.mfp
argv[4]: /home/ssa/33119_582/FW_582--0/Configuration_Files/33119.0.driveconfig
argv[5]: log=/home/ssa/ssd/FW_PPRO_5_2_2_Release.672199.release--0/fw.log
Log File: SF_Genesis_Main_Log__Sat_11.21.2015_21.20.23.log
Hostname: Unknown
Host IP Address: Unknown
Port Number: 0
DeviceName: /dev/sg0
SF_Genesis Version: v1.7.0.01020130612-fc14-32bit
SF_Core Library Version: v1.7.1.20130612-fc14-32bit
SF_OS_Information: Linux 2.6.35.11-83.fc14.i686.PAE #1 SMP Mon Feb 7 06:57:55 UTC 2011 i686
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post Processing Device Information:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WWN OUI: UNKNOWN
WWN UniqueID: UNKNOWN
Serial No.: UNKNOWN
Model No.: UNKNOWN
Firmware Revision: UNKNOWN
ROM Revision: UNKNOWN
NAND Page Size: UNKNOWN
Number Of Chip Enable: UNKNOWN
Logical Sectors: UNKNOWN
NAND ID: UNKNOWN
Flash Manufacturer: UNKNOWN
Flash Device: UNKNOWN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sat 11/21/2015 21:20:23] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -DOWNLOAD_MFB
argv[2]: 0:0:0:0
argv[3]: /home/ssa/33119_582/FW_582--0/FW_582.0.mfp
argv[4]: /home/ssa/33119_582/FW_582--0/Configuration_Files/33119.0.driveconfig
argv[5]: log=/home/ssa/ssd/FW_PPRO_5_2_2_Release.672199.release--0/fw.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sat 11/21/2015 21:20:23] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0'
[Sat 11/21/2015 21:20:28] - Issuing a discovery command for device: '0:0:0:0'
[Sat 11/21/2015 21:20:33] - Discovery command completed...
[Sat 11/21/2015 21:20:33] - Waiting 5 seconds for the system to settle...
[Sat 11/21/2015 21:20:38] - Device designation string '0:0:0:0' is mapped to node '/dev/sg0'
[Sat 11/21/2015 21:20:38] - Proceeding to perform the requested DownloadMFB() operation on device: /dev/sg0
[Sat 11/21/2015 21:20:38] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg0
MFP Package Filename = /home/ssa/33119_582/FW_582--0/FW_582.0.mfp
Configuration File = /home/ssa/33119_582/FW_582--0/Configuration_Files/33119.0.driveconfig
Serial No. = -DOWNLOAD_MFB
World Wide Name = N/A
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sat 11/21/2015 21:20:38] - Successfully received the IDENTIFY data from the drive...
[Sat 11/21/2015 21:20:38] - Validating Manufacturing Firmware Package: /home/ssa/33119_582/FW_582--0/FW_582.0.mfp
[Sat 11/21/2015 21:20:38] - Successfully opened the package: /home/ssa/33119_582/FW_582--0/FW_582.0.mfp
[Sat 11/21/2015 21:20:38] - file /home/ssa/33119_582/FW_582--0/Configuration_Files/33119.0.driveconfig Loaded successfully
[Sat 11/21/2015 21:20:38] - Warning: Unable to query diagnostics information to perform power management settings check
[Sat 11/21/2015 21:20:38] - B01 Power Management configuration request detected
[Sat 11/21/2015 21:20:38] - Successfully extracted *.DriveConfig file: /home/ssa/33119_582/FW_582--0/Configuration_Files/33119.0.driveconfig
[Sat 11/21/2015 21:20:38] - Extracted Config_ID: 1 (33119) in DriveConfig file: /home/ssa/33119_582/FW_582--0/Configuration_Files/33119.0.driveconfig
[Sat 11/21/2015 21:20:38] - Extracted SerialOutputControl: 0
[Sat 11/21/2015 21:20:38] - Searching for flashware image for configuration 33119
[Sat 11/21/2015 21:20:38] - Manifest found for configuration 33119
[Sat 11/21/2015 21:20:38] - Flashware image extracted: 33119_fw_cl_mlc_Micron_64Gb_MT29F64G08CBEDB_2Q_2C_1D_PP_R02619_s512.vic
[Sat 11/21/2015 21:20:38] - Searching for manufacturing image for configuration 33119
[Sat 11/21/2015 21:20:38] - Manifest found for configuration 33119
[Sat 11/21/2015 21:20:38] - Manufacturing image extracted: 33119_mf_mlc_Micron_64Gb_MT29F64G08CBEDB_2Q_2C_1D_PP_R02619_s512.vic
[Sat 11/21/2015 21:20:38] - Proceeding in ROM mode, download feature 3...
[Sat 11/21/2015 21:21:45] - FATAL_ERROR: Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ATA COMMAND : 0x0092 (146)
ATA FEATURE : 0x0003 (3)
Device Status: 0x0001 (1)
Driver Status: 0x0000 (0)
Host Status: 0x0008 (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0 - No Sense: 114 (0x72) OK
1 - Recovered Error: 11 (0x0B) FAIL
2 - Not Ready: 0 (0x00) OK
3 - Medium Error: 0 (0x00) OK
4 - Hardware Error: 0 (0x00) OK
5 - Illegal Request: 0 (0x00) OK
6 - Unit Attention: 0 (0x00) OK
7 - Data Protect: 14 (0x0E) OK
8 - Blank Check: 9 (0x09) OK
9 - Vendor Specific: 12 (0x0C) OK
10 - Copy Aborted: 0 (0x00) OK
11 - Aborted Command: 0 (0x00) OK
12 - Equal Comparison: 0 (0x00) NA
13 - Volume Overflow: 0 (0x00) NA
14 - Miscompare: 0 (0x00) OK
15 - Reserved: 128 (0x80) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~
[ 4611.717382] res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 4611.717391] ata1.00: status: { DRDY ERR }
[ 4611.717398] ata1.00: error: { ABRT }
[ 4611.717420] ata1.00: device reported invalid CHS sector 0
[ 4611.717446] sd 0:0:0:0: [sda] START_STOP FAILED
[ 4611.717451] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4611.717458] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[ 4611.717467] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[ 4611.717537] ata1.00: disabled
[ 4616.718856] ata1: hard resetting link
[ 4617.022959] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4617.024004] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 4617.027520] ata1.00: ATA-8: SandForce{200026BB}, 402ABBR0, max UDMA/133
[ 4617.027528] ata1.00: 64 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 4617.033582] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 4617.037067] ata1.00: configured for UDMA/133
[ 4617.037077] ata1: EH complete
[ 4617.037234] scsi 0:0:0:0: Direct-Access ATA SandForce{200026 402A PQ: 0 ANSI: 5
[ 4617.037517] sd 0:0:0:0: [sda] 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
[ 4617.037523] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4617.037627] sd 0:0:0:0: [sda] Write Protect is off
[ 4617.037633] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4617.037678] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4617.037894] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4617.039740] sda: unknown partition table
[ 4617.049036] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4633.398457] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 4633.398466] ata1.00: failed command: DOWNLOAD MICROCODE
[ 4633.398476] ata1.00: cmd 92/03:2d:00:00:02/00:00:00:00:00/00 tag 0 pio 23040 out
[ 4633.398478] res 40/00:00:80:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 4633.398483] ata1.00: status: { DRDY }
[ 4633.398492] ata1: hard resetting link
[ 4638.743462] ata1: link is slow to respond, please be patient (ready=0)
[ 4643.427574] ata1: COMRESET failed (errno=-16)
[ 4643.427584] ata1: hard resetting link
[ 4648.772590] ata1: link is slow to respond, please be patient (ready=0)
[ 4653.456718] ata1: COMRESET failed (errno=-16)
[ 4653.456728] ata1: hard resetting link
[ 4658.801738] ata1: link is slow to respond, please be patient (ready=0)
[ 4688.433967] ata1: COMRESET failed (errno=-16)
[ 4688.433978] ata1: limiting SATA link speed to 1.5 Gbps
[ 4688.433982] ata1: hard resetting link
[ 4693.473502] ata1: COMRESET failed (errno=-16)
[ 4693.473512] ata1: reset failed, giving up
[ 4693.473566] ata1.00: disabled
[ 4693.473592] ata1: EH complete
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sat 11/21/2015 21:21:45] - Completed the requested DownloadMFB() operation on device: /dev/sg0
[Sat 11/21/2015 21:21:45] - End of Genesis manufacturing log.
[Sat 11/21/2015 21:21:45] - Exiting...
</Log_Body>
<Overall_Summary>
<Start_Time> Sat, 11/21/2015 @ 21:20:23 </Start_Time>
<End_Time> Sat, 11/21/2015 @ 21:21:45 </End_Time>
<Overall_Result> FAIL </Overall_Result>
<Exit_Code> (0x10090014:SF_GENESIS_FW_DOWNLOAD_ERROR) </Exit_Code>
</Overall_Summary>
<Environment_Settings>
<Input_Parameters>
argv[1]: -DOWNLOAD_MFB
argv[2]: 0:0:0:0
argv[3]: /home/ssa/33119_582/FW_582--0/FW_582.0.mfp
argv[4]: /home/ssa/33119_582/FW_582--0/Configuration_Files/33119.0.driveconfig
argv[5]: log=/home/ssa/ssd/FW_PPRO_5_2_2_Release.672199.release--0/fw.log
</Input_Parameters>
<Log_File> SF_Genesis_Main_Log__Sat_11.21.2015_21.20.23.log </Log_File>
<Hostname> Unknown </Hostname>
<Host_IP_Address> Unknown </Host_IP_Address>
<Port_Number> 0 </Port_Number>
<Device_Name> /dev/sg0 </Device_Name>
<SF_Genesis_Version> v1.7.0.01020130612-fc14-32bit </SF_Genesis_Version>
<SF_Core_Library_Version> v1.7.1.20130612-fc14-32bit </SF_Core_Library_Version>
<SF_OS_Information> Linux 2.6.35.11-83.fc14.i686.PAE #1 SMP Mon Feb 7 06:57:55 UTC 2011 i686 </SF_OS_Information>
</Environment_Settings>
<Post_Processing_Device_Info>
<WWN_OUI> UNKNOWN </WWN_OUI>
<WWN_UniqueID> UNKNOWN </WWN_UniqueID>
<Serial_Number> UNKNOWN </Serial_Number>
<Model_Number> UNKNOWN </Model_Number>
<Firmware_Revision> UNKNOWN </Firmware_Revision>
<ROM_Revision> UNKNOWN </ROM_Revision>
<NAND_Page_Size> UNKNOWN </NAND_Page_Size>
<Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable>
<Logical_Sectors> UNKNOWN </Logical_Sectors>
<NAND_ID> UNKNOWN </NAND_ID>
<Flash_Manufacturer> UNKNOWN </Flash_Manufacturer>
<Flash_Device> UNKNOWN </Flash_Device>
</Post_Processing_Device_Info>
</Genesis_Log>
[Sat 11/21/2015 21:21:45] - Overall Result for Device: /dev/sg0 ****** FAIL ******
|
