Ремонт SSD накопителей на контроллерах SandForce - [37] :: Магнитные носители информации

[liveuser@localhost ~]$ su
[root@localhost liveuser]# lsscsi
[0:0:0:0] disk ATA SandForce{200026 20DA /dev/sda
[1:0:0:0] cd/dvd TSSTcorp CDDVDW SN-208AB TO03 /dev/sr0
[6:0:0:0] disk Single Flash Reader 1.00 /dev/sdb
[7:0:0:0] disk UFD 3.0 Silicon-Power16G 1.00 /dev/sdc
[12:0:0:0] disk Sony MSAC-UAM2 1.00 /dev/sdf
[13:0:0:0] disk UFD 2.0 Silicon-Power32G PMAP /dev/sde
[root@localhost liveuser]# /home/liveuser/SF_Genesis -PROCESS_SSD 0:0:0:0 /media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp /media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/22818.0.driveconfig 12345 www_123 log=/media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/Results_Test_PackageManager.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit

Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 03/01/2016 18:32:37] - SF_Genesis has been invoked with the following parameters:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
argv[4]: /media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/22818.0.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/Results_Test_PackageManager.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Tue 03/01/2016 18:32:37] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0'
[Tue 03/01/2016 18:32:43] - Issuing a discovery command for device: '0:0:0:0'
[Tue 03/01/2016 18:34:43] - Discovery command completed...
[Tue 03/01/2016 18:34:43] - Waiting 5 seconds for the system to settle...
[Tue 03/01/2016 18:34:48] - End of Genesis manufacturing log.
[Tue 03/01/2016 18:34:48] - Exiting...
[Tue 03/01/2016 18:34:48] - Overall Result for Device: ****** FAIL ******

что то опять не так подскажите!!!

Добавлено:
вот что получил сейчас буду смотреть диск

[liveuser@localhost ~]$ su
[root@localhost liveuser]# lsscsi
[0:0:0:0] disk ATA SandForce{200026 20DA /dev/sda
[1:0:0:0] cd/dvd TSSTcorp CDDVDW SN-208AB TO03 /dev/sr0
[6:0:0:0] disk UFD 2.0 Silicon-Power32G PMAP /dev/sdb
[7:0:0:0] disk Single Flash Reader 1.00 /dev/sdc
[root@localhost liveuser]# /home/liveuser/SF_Genesis -PROCESS_SSD 0:0:0:0 /media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp /media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/22818.0.driveconfig 12345 www_123 log=/media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/Results_Test_PackageManager.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit

Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 03/01/2016 19:44:24] - SF_Genesis has been invoked with the following parameters:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
argv[4]: /media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/22818.0.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/Results_Test_PackageManager.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Tue 03/01/2016 19:44:24] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0'
[Tue 03/01/2016 19:44:29] - Issuing a discovery command for device: '0:0:0:0'
[Tue 03/01/2016 19:44:34] - Discovery command completed...
[Tue 03/01/2016 19:44:34] - Waiting 5 seconds for the system to settle...
[Tue 03/01/2016 19:44:39] - Device designation string '0:0:0:0' is mapped to node '/dev/sg0'
[Tue 03/01/2016 19:44:39] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg0
MFP Package Filename = /media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
Configuration File = /media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/22818.0.driveconfig
Serial No. = 12345
World Wide Name = www_123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Tue 03/01/2016 19:44:39] - Successfully received the IDENTIFY data from the drive...
[Tue 03/01/2016 19:44:39] - Validating Manufacturing Firmware Package: /media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
[Tue 03/01/2016 19:45:05] - Successfully opened the package: /media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
[Tue 03/01/2016 19:45:05] - file /media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/22818.0.driveconfig Loaded successfully
[Tue 03/01/2016 19:45:05] - Warning: Unable to query diagnostics information to perform power management settings check
[Tue 03/01/2016 19:45:05] - B01 Power Management configuration request detected
[Tue 03/01/2016 19:45:05] - Successfully extracted *.DriveConfig file: /media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/22818.0.driveconfig
[Tue 03/01/2016 19:45:05] - Extracted Config_ID: 1 (22818) in DriveConfig file: /media/SP32/FW_PPRO_5_2_2_Release.672199.release--0/22818.0.driveconfig
[Tue 03/01/2016 19:45:05] - Extracted SerialOutputControl: 0
[Tue 03/01/2016 19:45:05] - Searching for flashware image for configuration 22818
[Tue 03/01/2016 19:45:05] - Manifest found for configuration 22818
[Tue 03/01/2016 19:45:05] - Flashware image extracted: 22818_fw_cl_mlc_Micron_32Gb_MT29F128G08CBACAWP_2Q_2C_1D_S_PP_R00755_s512.vic
[Tue 03/01/2016 19:45:05] - Searching for manufacturing image for configuration 22818
[Tue 03/01/2016 19:45:05] - Manifest found for configuration 22818
[Tue 03/01/2016 19:45:05] - Manufacturing image extracted: 22818_mf_mlc_Micron_32Gb_MT29F128G08CBACAWP_2Q_2C_1D_S_PP_R00755_s512.vic
[Tue 03/01/2016 19:45:05] - Proceeding in ROM mode, download feature 3...
[Tue 03/01/2016 19:45:05] - Successfully downloaded MFB to the drive...
[Tue 03/01/2016 19:45:05] - Waiting (5 sec) for the drive to settle...
[Tue 03/01/2016 19:45:10] - Successfully received the IDENTIFY data from the drive...
[Tue 03/01/2016 19:45:10] - Firmware revision reported to be: '522ABBM0'. This indicates MFB download was successful.
[Tue 03/01/2016 19:45:10] - Successfully enabled SMART capabilities...
[Tue 03/01/2016 19:45:12] - Successfully issued a diagnostic unlock...
[Tue 03/01/2016 19:45:13] - Performing the flash test of block 0 (0x0000)...
[Tue 03/01/2016 19:45:15] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 2
Chip Enabled Count: 2
Die Count: 1
Lane Count: 4
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------

+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0022 | N3,N5 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0022 | N3,N5 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 3 | 0x0023 | N1,N3,N5 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 1 | 0x0042 | N3,N6 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 3 | 0x0003 | N1,N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 2 | 0x0003 | N1,N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 3 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 1 | 0x0042 | N3,N6 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 2 | 0x0003 | N1,N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 3 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+

-----------------------------------------------------------------------------
Total Number of test results: 16
Number of failures: 0
Number of Passed with warnings: 14
No. Passed without warnings: 2
-----------------------------------------------------------------------------

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Tue 03/01/2016 19:45:15] - Performing the FORMAT Command with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MemoryWearCycleCapability = 0
CurrentPE_CycleCount = 0
LifeInSeconds = 0
LogicalCapacity = 117231408
SectorSize = 512
SectorAlignmentOffset = 0
ExpectedMemoryID = 26668 (0x682C)
ExpectedNumDies = 0
SerialOutputControl = 0
Time[8] = 0x0000000000000000
MiscFlag_Erase_R_Block = 0
MiscFlag_PanicHandlingEnabled = 0
MiscFlag_PanicOnSATA_Error = 0
MiscFlag_WriteThrottlingTestMode = 0
MiscFlag_DisableUserBandECCX = 1
L_PageSize = 0
E_PageSize = 0
ErrorCorrectionPower = 0
ConfigDeviceReadDisturbCount = 0
ConfigDeviceReadDisturbCountLow = 0
ExtraOptions_0_1 = 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Tue 03/01/2016 19:45:49] - FORMAT command completed...
[Tue 03/01/2016 19:45:49] - Waiting (2 sec) for the drive to settle...
[Tue 03/01/2016 19:45:51] - Setting up the stamp information through CDU command...
[Tue 03/01/2016 19:45:54] - Waiting (2 sec) for the drive to settle...
[Tue 03/01/2016 19:45:56] - Downloading the flashware to the drive... feature 3
[Tue 03/01/2016 19:45:58] - Successfully downloaded flashware to the drive...
[Tue 03/01/2016 19:45:58] - Waiting (15 sec) for the drive to settle...
[Tue 03/01/2016 19:46:13] - Successfully received the IDENTIFY data from the drive...
[Tue 03/01/2016 19:46:13] - Firmware revision reported to be: '522ABBF0'
[Tue 03/01/2016 19:46:13] - Enabling SMART support...
[Tue 03/01/2016 19:46:13] - Issuing a diagnostic unlock to the drive...
[Tue 03/01/2016 19:46:15] - Setting up Max LBA settings...
[Tue 03/01/2016 19:46:18] - Change of sector size is not required, sector size is already set to 512
[Tue 03/01/2016 19:46:19] - Setting the serial number of the drive to: 12345
[Tue 03/01/2016 19:46:22] - Setting the World Wide Name (WWN) of the drive to: www_123
[Tue 03/01/2016 19:46:25] - Processing completed for device: 12345
[Tue 03/01/2016 19:46:25] - Begin collecting the device post-process log/information
[Tue 03/01/2016 19:46:25] - Creating the Log Bundle...
[Tue 03/01/2016 19:46:25] - Plain text identify log created
[Tue 03/01/2016 19:46:26] - Plain text diagnostics identify log created
[Tue 03/01/2016 19:46:27] - Plain text diagnostics information log created
[Tue 03/01/2016 19:46:28] - Plain text format information log created
[Tue 03/01/2016 19:46:28] - Plain text SMART log created
[Tue 03/01/2016 19:46:29] - Plain text manufacturing defect list log created
[Tue 03/01/2016 19:46:31] - Plain text grown defect list log created
[Tue 03/01/2016 19:46:32] - Plain text panic directory listing log created
[Tue 03/01/2016 19:46:32] - Completed collecting all plain text log files.
[Tue 03/01/2016 19:46:32] - End of logs and information collection
[Tue 03/01/2016 19:46:33] - Applying the remaining ConfigUniqueDrive settings...
[Tue 03/01/2016 19:46:34] - Setting Customer ID with value : 0
[Tue 03/01/2016 19:46:34] - Setting Device Nominal Form Factor with value : 3
[Tue 03/01/2016 19:46:34] - Setting Diagnostic Unlock Key with value supplied
[Tue 03/01/2016 19:46:34] - Setting Max LBA Count for 4096 Plus DIFF Sectors with value : 0
[Tue 03/01/2016 19:46:34] - Setting Max LBA Count for 4096 Sectors with value : 0
[Tue 03/01/2016 19:46:34] - Setting Max LBA Count for 512B Plus DIFF Sectors with value : 0
[Tue 03/01/2016 19:46:34] - Setting Max LBA Count for 512B Sectors with value : 0
[Tue 03/01/2016 19:46:34] - Setting Max LBA Count for 520B Sectors with value : 0
[Tue 03/01/2016 19:46:34] - Setting Max LBA Count for 524B Sectors with value : 0
[Tue 03/01/2016 19:46:34] - Setting Max LBA Count for 528B Sectors with value : 0
[Tue 03/01/2016 19:46:34] - Setting Model No. with value : CORSAIR 60GB
[Tue 03/01/2016 19:46:34] - Setting Power Management Version with value : 0
[Tue 03/01/2016 19:46:34] - Setting Serial Number with value : 1234567890
[Tue 03/01/2016 19:46:34] - Total of 1 valid MaxLBA settings were setup to be written to the drive.
[Tue 03/01/2016 19:46:36] - Successfully applied the remaining ConfigUniqueDrive settings...
[Tue 03/01/2016 19:46:36] - Issuing an IdleImmediate command to the drive...
[Tue 03/01/2016 19:46:36] - Not an Enterprise drive,so, continuing without setting master password..
[Tue 03/01/2016 19:46:36] - End of Genesis manufacturing log.
[Tue 03/01/2016 19:46:36] - Exiting...
[Tue 03/01/2016 19:46:36] - Overall Result for Device: /dev/sg0 ****** PASS ******

Модерирует : Akam1, Dr_StandBy, vertex4
Akam1 (23-12-2016 01:32): http://forum.ru-board.com/topic.cgi?forum=84&topic=5239	Версия для печати • Подписаться • Добавить в закладки
Страницы: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106