Progaks
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
выкладываю два лога
1 терминал
Код: [ROM] Undec Cmd 0xe0
[ROM] Hard Reset ===> Link is Down.
[ROM] PHY Ready
[ROM] Sig Sent
[ROM] Undec Cmd 0xec
[ROM] Undec Cmd 0xef
[ROM] Undec Cmd 0xef
[ROM] Undec Cmd 0xec
[ROM] Undec Cmd 0xef
[ROM] Data Cmd
[ROM] READ NCQ CMD
[ROM] R_NCQ done, lba:00000000, count:00000008, tag:00000009
[ROM] Data Cmd
[ROM] READ NCQ CMD
[ROM] R_NCQ done, lba:00000008, count:00000008, tag:0000000a
[ROM] Undec Cmd 0xec
[ROM] Data Cmd
[ROM] READ NCQ CMD
[ROM] R_NCQ done, lba:00000000, count:00000008, tag:00000018
[ROM] Data Cmd
[ROM] READ NCQ CMD
[ROM] R_NCQ done, lba:00000018, count:00000008, tag:00000019
[ROM] Data Cmd
[ROM] READ NCQ CMD
[ROM] R_NCQ done, lba:00000008, count:00000008, tag:0000001a
[ROM] Data Cmd
[ROM] READ NCQ CMD
[ROM] R_NCQ done, lba:00000010, count:00000008, tag:0000001b
[ROM] Data Cmd
[ROM] READ NCQ CMD
[ROM] R_NCQ done, lba:00000020, count:00000008, tag:0000001c
[ROM] Undec Cmd 0xec
[ROM] Undec Cmd 0xec
[ROM] Undec Cmd 0xb0
[ROM] Undec Cmd 0x92
[ROM] non-DMA
[ROM] Undec Cmd 0x92
[ROM] non-DMA
[ROM] Undec Cmd 0x92
[ROM] non-DMA
[ROM] Undec Cmd 0x92
[ROM] non-DMA
<MFB> ---> Sector size 0 bytes L-Page size 4096 bytes <---
<MFB> *** MFB 503 Jul 19 2012 20:30:22 B:FW_PPRO_MP3_5_0_2_20120315:FW_PPRO_5_0_
3_Release-448193 ***
<MFB> *** Config cfg/cfg_MLC_Micron_64Gb_MT29F128G08CFAAAWP_2Q_2C_1D_S ***
*** Chip RevId from HW: B01 (ID=288571), FW Targeted For: B02 ASIC ***
<MFB> *** SysClk : 300 MHz
*** Packer : 500 MHz
*** Flash : 800 MHz
*** FlaDiv : 6
<MFB> *** TMI_TS : 2
<MFB> GPIO0:1
<MFB> Scap charge wait
<MFB> Scap charge done
<usrspc>libSfStartC enter cfg:3fff3058
<MFB> Flash Rblock Test on 0 - bus:2 ce:2 die:1 lane:4 pageCnt:1 correctPwr:128
seed:dead3664 markers:2000
Errors in BUS:0 CE: 0 DIE:0 [ LANE 0: 0002, LANE 1: 0002, LANE 2: 0022, LAN
E 3: 0002, <MFB> ]
Errors in BUS:1 CE: 0 DIE:0 [ LANE 0: 0002, LANE 1: 0002, LANE 2: 0002, LAN
E 3: 0002, <MFB> ]
Errors in BUS:0 CE: 1 DIE:0 [ LANE 0: 0002, LANE 1: 0002, LANE 2: 0002, LAN
E 3: 0003, <MFB> ]
Errors in BUS:1 CE: 1 DIE:0 [ LANE 0: 0002, LANE 1: 0002, LANE 2: 0042, LAN
E 3: 0002, <MFB> ]
<MFB> Read Device ID: 2C 88 04 4B A9 00
<MFB> == Format mode ONE align 0 ==
<MFB> ---> Sector size 0 bytes L-Page size 4096 bytes <---
<MFB> Flash ID Check
<MFB> Creating New Root
<MFB> Bad Block Discovery ...
<MFB> Number of Bad Blocks for SE/plane/lane
<MFB> SE pl: ln0 ln1 ln2 ln3
<MFB> 0 0: 1 1 1 1
<MFB> 0 1: 1 1 1 1
<MFB> 1 0: 1 1 1 1
<MFB> 1 1: 1 1 2 1
<MFB> 2 0: 1 1 1 1
<MFB> 2 1: 1 1 1 1
<MFB> 3 0: 1 1 1 1
<MFB> 3 1: 1 1 1 1
<MFB> Total Bad Block number is: 33 out of 65536
<MFB> Added donor[0]= 45
<MFB> Added donor[1]= 1335
<MFB> Enabling Remap Unit...
<MFB> Erasing All Virgin Blocks...
<MFB> Creating the Root Record ...
<MFB> Input PE: 0
<MFB> Drive RDD:100000 RDD Low:100000, PE: 3000 Options:0000 Warranty: 0
<MFB> WP Circuit Not Present
<MFB> Initialize the Root ...
<MFB> Found a valid Config Record.
<MFB> Bus Width [bits] = 32
<MFB> Number of CE = 2
<MFB> Number of Die / CE = 1
<MFB> CE CFG (Bus Mode) = 2-DIMM
<MFB> Number of Bus = 2
<MFB> Flash Page Size = 8192
<MFB> Flash Page / Block = 256
<MFB> Number of Block / Die = 2048
<MFB> E-Page Size = 512
<MFB> ECC Bytes = 27
<MFB> ECC Correction Power = 16
<MFB> EVT LOG. Panic Dump slot 0 epa 0x00020002
<MFB> EVT LOG. Panic Dump slot 1 epa 0x20020002
<MFB> EVT LOG. Panic Dump slot 2 epa 0x00020082
<MFB> EVT LOG. Panic Dump slot 3 epa 0x20020082
<MFB> Saving Bad Block List ...
<MFB> Initializing SMART root file ...
<MFB> InitSmartLogRootFile is done
<MFB> Saving Grown Defect List ...
<MFB> Initializing Life Table ...
<MFB> Saving Life Table ...
<MFB> Set LBA Offset to 0 ...
<MFB> Clearing the Map Table ...
<MFB> Clearing the SIN Table ...
<MFB> Saving the MAP Table1 ...
<MFB> Saving the MAP Table2 ...
<MFB> Saving the SIN Table ...
<MFB> Saving the Remap Table ...
---> SAVE REMAP/DONOR FID 19 [tbl 1 off 00000 sz 30000] [tbl 2 off 30000 sz 00cc
8] <MFB> TOTAL 30CC8 (199880) bytes 2 ticks <---
<MFB> Verifying the Remap Table ...
---> LOAD REMAP/DONOR FID 19 [tbl 1 off 00000 sz 30000] [tbl 2 off 30000 sz 00cc
8] <MFB> TOTAL 30CC8 (199880) bytes, 1 ticks, 0 remapped <---
<MFB> Saving the RD Table ...
<MFB> Saving the ID Data ...
<MFB> Saving the Free Table ...
<MFB> Finalizing the ROOT ...
<MFB> Factory Setup finished; you may reboot or download Flashware now.
<usrspc>SCT_CONFIG_DRIVE_UNIQUE: user space synced
<MFB> Firmware Fuse=0xFC00FC00, computed value=0xFC00
<MFB> PPRO_STAMP FROM IMAGE: 06 14 00 fc 00 00 20 20
<MFB> STAMP OK at offset 0x000000
<MFB> Need 380672 More!
<MFB> SATA_UPDATE_IN_PROGRESS
<MFB> Need 315136 More!
<MFB> SATA_UPDATE_IN_PROGRESS
<MFB> Need 249600 More!
<MFB> SATA_UPDATE_IN_PROGRESS
<MFB> Need 184064 More!
<MFB> SATA_UPDATE_IN_PROGRESS
<MFB> Need 118528 More!
<MFB> SATA_UPDATE_IN_PROGRESS
<MFB> Need 52992 More!
<MFB> SATA_UPDATE_IN_PROGRESS
<MFB> Validate SHA on Input Stream Microcode: PASS!
<MFB> Did not find appendix signature.
<MFB> Info 1: not a valid appendix.
<MFB> Validate SHA on Root File 3: PASS!
<MFB> Validate SHA on Root File 4: PASS!
<MFB> Download Microcode PASS!
<MFB> SATA_UPDATE_COMPLETE
<MFB> Warm Start (state=14) - Resetting ALL hardware blocks!
[ROM] Chip ID 0x200026BB
*** ROM Rev 20D Dec 20 2010 Build 288571 ***
[ROM] Force Download: waiting for Download Microcode Command...
[ROM] Waiting for Link to come up...
[ROM] Link is UP.
[ROM] Undec Cmd 0xec
[ROM] Undec Cmd 0xef
[ROM] Undec Cmd 0xef
[ROM] Undec Cmd 0xec
[ROM] Undec Cmd 0xef
[ROM] Undec Cmd 0xec |
2 Genesis
Код: <?xml version = "1.0"?>
<Genesis_Log>
<Log_Body>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Overall Summary:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Start Time: Wed, 03/02/2016 @ 10:55:09
End Time: Wed, 03/02/2016 @ 10:56:38
OverallResult: FAIL
ExitCode: (0x10090012:SF_GENESIS_IDENTIFY_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Environment Settings:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Input Parameters:
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/FW_SF-2000_5_0_3_Client_MP.1.mfp
argv[4]: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/Configuration_Files/22189.1.driveconfig
argv[5]: 12345
argv[6]: wwww_123
argv[7]: log=/home/admin/123.log
Log File: SF_Genesis_Main_Log__Wed_03.02.2016_10.55.09.log
Hostname: localhost.localdomain
Host IP Address: 127.0.0.1
Port Number: 0
DeviceName: /dev/sg0
SF_Genesis Version: v1.7.0.01020130612-fc14-32bit
SF_Core Library Version: v1.7.1.20130612-fc14-32bit
SF_OS_Information: Linux 4.4.2-301.fc23.i686 #1 SMP Tue Feb 23 19:29:58 UTC 2016 i686
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post Processing Device Information:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WWN OUI: UNKNOWN
WWN UniqueID: UNKNOWN
Serial No.: UNKNOWN
Model No.: UNKNOWN
Firmware Revision: UNKNOWN
ROM Revision: UNKNOWN
NAND Page Size: UNKNOWN
Number Of Chip Enable: UNKNOWN
Logical Sectors: UNKNOWN
NAND ID: UNKNOWN
Flash Manufacturer: UNKNOWN
Flash Device: UNKNOWN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 03/02/2016 10:55:09] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/FW_SF-2000_5_0_3_Client_MP.1.mfp
argv[4]: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/Configuration_Files/22189.1.driveconfig
argv[5]: 12345
argv[6]: wwww_123
argv[7]: log=/home/admin/123.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 03/02/2016 10:55:09] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0'
[Wed 03/02/2016 10:55:14] - Issuing a discovery command for device: '0:0:0:0'
[Wed 03/02/2016 10:55:19] - Discovery command completed...
[Wed 03/02/2016 10:55:19] - Waiting 5 seconds for the system to settle...
[Wed 03/02/2016 10:55:24] - Device designation string '0:0:0:0' is mapped to node '/dev/sg0'
[Wed 03/02/2016 10:55:24] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg0
MFP Package Filename = /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/FW_SF-2000_5_0_3_Client_MP.1.mfp
Configuration File = /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/Configuration_Files/22189.1.driveconfig
Serial No. = 12345
World Wide Name = wwww_123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 03/02/2016 10:55:25] - Successfully received the IDENTIFY data from the drive...
[Wed 03/02/2016 10:55:25] - Validating Manufacturing Firmware Package: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/FW_SF-2000_5_0_3_Client_MP.1.mfp
[Wed 03/02/2016 10:55:26] - Successfully opened the package: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/FW_SF-2000_5_0_3_Client_MP.1.mfp
[Wed 03/02/2016 10:55:26] - file /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/Configuration_Files/22189.1.driveconfig Loaded successfully
[Wed 03/02/2016 10:55:27] - Warning: Unable to query diagnostics information to perform power management settings check
[Wed 03/02/2016 10:55:27] - B01 Power Management configuration request detected
[Wed 03/02/2016 10:55:27] - Successfully extracted *.DriveConfig file: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/Configuration_Files/22189.1.driveconfig
[Wed 03/02/2016 10:55:27] - Extracted Config_ID: 1 (22189) in DriveConfig file: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/Configuration_Files/22189.1.driveconfig
[Wed 03/02/2016 10:55:27] - Extracted SerialOutputControl: 0
[Wed 03/02/2016 10:55:27] - Searching for flashware image for configuration 22189
[Wed 03/02/2016 10:55:27] - Manifest found for configuration 22189
[Wed 03/02/2016 10:55:27] - Flashware image extracted: 22189_fw_cl_mlc_Micron_64Gb_MT29F128G08CFAAAWP_2Q_2C_1D_S_PP_R00714_s512.vic
[Wed 03/02/2016 10:55:27] - Searching for manufacturing image for configuration 22189
[Wed 03/02/2016 10:55:27] - Manifest found for configuration 22189
[Wed 03/02/2016 10:55:27] - Manufacturing image extracted: 22189_mf_mlc_Micron_64Gb_MT29F128G08CFAAAWP_2Q_2C_1D_S_PP_R00714_s512.vic
[Wed 03/02/2016 10:55:27] - Proceeding in ROM mode, download feature 3...
[Wed 03/02/2016 10:55:27] - Successfully downloaded MFB to the drive...
[Wed 03/02/2016 10:55:27] - Waiting (5 sec) for the drive to settle...
[Wed 03/02/2016 10:55:32] - Successfully received the IDENTIFY data from the drive...
[Wed 03/02/2016 10:55:32] - Firmware revision reported to be: '503ABBM0'. This indicates MFB download was successful.
[Wed 03/02/2016 10:55:32] - Successfully enabled SMART capabilities...
[Wed 03/02/2016 10:55:34] - Successfully issued a diagnostic unlock...
[Wed 03/02/2016 10:55:35] - Performing the flash test of block 0 (0x0000)...
[Wed 03/02/2016 10:55:37] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 2
Chip Enabled Count: 2
Die Count: 1
Lane Count: 4
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0022 | N3,N5 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 3 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 1 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 2 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 3 | 0x0003 | N1,N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 1 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 2 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 3 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 1 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 2 | 0x0042 | N3,N6 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 3 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
-----------------------------------------------------------------------------
Total Number of test results: 16
Number of failures: 0
Number of Passed with warnings: 16
No. Passed without warnings: 0
-----------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 03/02/2016 10:55:37] - Performing the FORMAT Command with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MemoryWearCycleCapability = 0
CurrentPE_CycleCount = 0
LifeInSeconds = 0
LogicalCapacity = 234441648
SectorSize = 512
SectorAlignmentOffset = 0
ExpectedMemoryID = 34860 (0x882C)
ExpectedNumDies = 0
SerialOutputControl = 0
Time[8] = 0x0000000000000000
MiscFlag_Erase_R_Block = 0
MiscFlag_PanicHandlingEnabled = 0
MiscFlag_PanicOnSATA_Error = 0
MiscFlag_WriteThrottlingTestMode = 0
MiscFlag_DisableUserBandECCX = 0
L_PageSize = 0
E_PageSize = 0
ErrorCorrectionPower = 0
ConfigDeviceReadDisturbCount = 0
ConfigDeviceReadDisturbCountLow = 0
ExtraOptions_0_1 = 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 03/02/2016 10:56:14] - FORMAT command completed...
[Wed 03/02/2016 10:56:14] - Waiting (2 sec) for the drive to settle...
[Wed 03/02/2016 10:56:16] - Setting up the stamp information through CDU command...
[Wed 03/02/2016 10:56:19] - Waiting (2 sec) for the drive to settle...
[Wed 03/02/2016 10:56:21] - Downloading the flashware to the drive... feature 3
[Wed 03/02/2016 10:56:23] - Successfully downloaded flashware to the drive...
[Wed 03/02/2016 10:56:23] - Waiting (15 sec) for the drive to settle...
[Wed 03/02/2016 10:56:38] - Successfully received the IDENTIFY data from the drive...
[Wed 03/02/2016 10:56:38] - FATAL_ERROR: Did not recieve the correct firmware revision. it is reported to be: '20DABBR0', indicating flashware download has failed.
[Wed 03/02/2016 10:56:38] - End of Genesis manufacturing log.
[Wed 03/02/2016 10:56:38] - Exiting...
</Log_Body>
<Overall_Summary>
<Start_Time> Wed, 03/02/2016 @ 10:55:09 </Start_Time>
<End_Time> Wed, 03/02/2016 @ 10:56:38 </End_Time>
<Overall_Result> FAIL </Overall_Result>
<Exit_Code> (0x10090012:SF_GENESIS_IDENTIFY_ERROR) </Exit_Code>
</Overall_Summary>
<Environment_Settings>
<Input_Parameters>
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/FW_SF-2000_5_0_3_Client_MP.1.mfp
argv[4]: /home/admin/ssd/FW/FW_SF-2000_5_0_3_Client_MP--1/Configuration_Files/22189.1.driveconfig
argv[5]: 12345
argv[6]: wwww_123
argv[7]: log=/home/admin/123.log
</Input_Parameters>
<Log_File> SF_Genesis_Main_Log__Wed_03.02.2016_10.55.09.log </Log_File>
<Hostname> localhost.localdomain </Hostname>
<Host_IP_Address> 127.0.0.1 </Host_IP_Address>
<Port_Number> 0 </Port_Number>
<Device_Name> /dev/sg0 </Device_Name>
<SF_Genesis_Version> v1.7.0.01020130612-fc14-32bit </SF_Genesis_Version>
<SF_Core_Library_Version> v1.7.1.20130612-fc14-32bit </SF_Core_Library_Version>
<SF_OS_Information> Linux 4.4.2-301.fc23.i686 #1 SMP Tue Feb 23 19:29:58 UTC 2016 i686 </SF_OS_Information>
</Environment_Settings>
<Post_Processing_Device_Info>
<WWN_OUI> UNKNOWN </WWN_OUI>
<WWN_UniqueID> UNKNOWN </WWN_UniqueID>
<Serial_Number> UNKNOWN </Serial_Number>
<Model_Number> UNKNOWN </Model_Number>
<Firmware_Revision> UNKNOWN </Firmware_Revision>
<ROM_Revision> UNKNOWN </ROM_Revision>
<NAND_Page_Size> UNKNOWN </NAND_Page_Size>
<Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable>
<Logical_Sectors> UNKNOWN </Logical_Sectors>
<NAND_ID> UNKNOWN </NAND_ID>
<Flash_Manufacturer> UNKNOWN </Flash_Manufacturer>
<Flash_Device> UNKNOWN </Flash_Device>
</Post_Processing_Device_Info>
</Genesis_Log>
[Wed 03/02/2016 10:56:38] - Overall Result for Device: /dev/sg0 ****** FAIL ******
|
|
