Klirik
Advanced Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору Maintaining the Printer The user-conducted preventive maintenance cycle for this printer is every 350,000 images. The part numbers for the preventive maintenance kits are C3914A for the 100V printers, and C3915A for the 220V printers. The kits contain the following replacement parts: one Fusing Assembly, one Transfer Roller Assembly, and eight Feed/ Separation Rollers [two each for Trays 2, 3, the 2000-sheet Input Tray (Tray 4), and the 2 x 500-sheet Input Tray (Trays 4 and 5)]. See Chapter 6 of this manual, and the instructions included in the kits for detailed replacement procedures. The control panel message, PERFORM PRINTER MAINTENANCE, indicates that the 350,000 image maintenance is due. After performing the maintenance procedures: Go to the control panel Configuration Menu and set the SERVICE MESSAGE= to OFF. Reset PAGES SINCE LAST MAINTENANCE: a. Turn the printer off. b. Holding down the [VALUE -] and [ITEM -] keys, turn the printer back on. Wait for Reset Maint/Count to display before releasing the keys. The default (350,000) maintenance message interval can be set to lesser values if needed (50K, 150K, 250K), for printers requiring more frequent maintenance. This feature is provided for customers using heavy, rough, or generally out-of-specification media that prematurely wears out the maintenance parts. Давай мыло, кину тебе еще на всякий случай как счетчики из сервисного режима обнулить, хотя думаю этого не потребуется... З.Ы. За эту мелочь 400 енотов??? Совсем не хило | Всего записей: 1330 | Зарегистр. 02-09-2001 | Отправлено: 17:03 11-08-2003 | Исправлено: Klirik, 17:11 11-08-2003 |
|