brity
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Попробуйте как описано здесь, это для 3ware контроллеров (3ware KB Q15416) :
ESXi is a leaner version of the ESXServer 3.5 which is targeted towards Embedded Systems Development.
Secondary storage (i.e. non-booting) support is now available for the 9650SE/9690SA using these instructions:
1. Install VMware ESXi 3.5 update 2 to a USB flash disk (or other non-3ware boot disk)
2. Boot up ESXi until the yellow screen appears.
3. Press alt-f1 to switch to virtual console 1.
4. Type 'unsupported', then press enter twice to get a shell prompt.
5. Copy oem.tgz (attached to this kb article) into the directory /bootbank using 'ftpget', 'ftpput'
or from an NFS mount via the 'esxcfg-nas' command.
6. Type chmod 755 /bootbank/oem.tgz
7. Reboot
Notes: 1. Installing ESXi 3.5 update 2 directly onto a 9650SE or 9690SA is not supported at this
time due to lack of ESXi 3rd party driver support at installation time.
2. Driver version is v2.24.08.020vm35. |
( 