Ремонт накопителей Seagate. Часть 3 - [39] :: Магнитные носители информации

Michael99

Цитата:

Хотя хотелось бы увидеть

а многим хотелось бы увидеть на русском языке это

Цитата:

"FormatPartition, m[Partition],[FormatOpts],[DefectListOpts],[MaxWrRetryCnt],[MaxRdRetryCnt],\n\r""[MaxEccTLevel],[MaxCertifyTrkRewrites],[ValidKey],[DataPattern]";

Input Parameters:

0 - Partition Number.

This parameter specifies the media partition to be formatted.

0 = User Partition
1 = System Partition

Type: Unsigned 8-bit value

Range: 0 or 1

Default: 0

1 - Format Options.

This parameter is a bit significant value that selects the following options:

Bits 31-6: not used

Bit 5: Enable SeaCOS XF Space Format.

This bit is only valid when the User Partition is selected. If this
bit is equal to 1, the the Format Partition command will only format
SeaCOS Extended File (XF) space.
NOTE: This feature can be enabled or disabled at compile-time. Use
the quick help to determine whether your code supports this feature.

Bit 4: Enable Zone Re-format Skipping.

If this bit is equal to 1, then the Format Partition command will
enable the zone re-format skipping mode during the format operation.
With this mode enabled, the format operation will not re-format
a zone if grown defects were found in the zone.
NOTE: This feature can be enabled or disabled at compile-time. Use
the quick help to determine whether your code supports this feature.

Bit 3: Enable Event-based Format Logging.

If this bit is equal to 1, then the Format Partition command will
display information about error events that occur during the format
operation. This information will be displayed as interim status as
these events occur.
NOTE: This feature can be enabled or disabled at compile-time. Use
the quick help to determine whether your code supports this feature.

Bit 2: Disable User Partition Certify.

This bit is only valid when the User Partition is selected. If this
bit is equal to 1, media certification and defect deallocation will
be disabled.

Bit 1: Disable User Partition Format.

This bit is only valid when the User Partition is selected. If this
bit is equal to 1, the User Partition sectors will not be written
with a constant data pattern.

Bit 0: Corrupt User Partition Primary Defects.

This bit is only valid when the User Partition is selected. If this
bit is equal to 1, the primary defective sectors will be corrupted.

Type: Unsigned 32-bit value

Range: 0 or 0xFFFFFFFF

Default: 0 (Enable User partition Certify,
Enable User Partition Format,
Don't Corrupt Primary Defects)

2 - Defect List Options.

This parameter is a bit significant value that selects the following options:

Bits 31-3: not used

Bit 2: Process the Active Error Log.

This bit is only valid when the User Partition is selected. If this
bit is equal to 1, the Format Client Defect List will be written with
contents of the Active Error Log and the option to process the Client
Defect List will be enabled. If there is no Active Error Log or there
are no R/W-related entries in the Active Error Log, then this bit will
be ignored.

Bit 1: Process Primary Defect Lists.

This bit is only valid when the User Partition is selected. If this
bit is equal to 1, the the Primary Defect Lists will be used when
creating the defect list to be used by the format operation.

Bit 0: Process Grown Defect Lists.

This bit is only valid when the User Partition is selected. If this
bit is equal to 1, the the Grown Defect Lists will be used when
creating the defect list to be used by the format operation.

и так далее и тому подобное

Модерирует : Akam1, Dr_StandBy, vertex4
Dekker (15-08-2012 13:02): http://forum.ru-board.com/topic.cgi?forum=84&topic=4232	Версия для печати • Подписаться • Добавить в закладки
Страницы: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101