Megasnooper
Newbie | Редактировать | Профиль | Сообщение | ICQ | Цитировать | Сообщить модератору
smartctl 6.0 2012-10-10 r3643 [i686-linux-3.5.6-pmagic] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST3500320AS
Serial Number: 5QM2Z5KX
LU WWN Device Id: 5 000c50 011542ab9
Firmware Version: SD15
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 1.5 Gb/s
Local Time is: Tue Nov 4 18:43:30 2014 UTC
==> WARNING: There are known problems with these drives,
THIS DRIVE MAY OR MAY NOT BE AFFECTED,
see the following web pages for details:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/207951en
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=632758
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 634) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 116) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 091 085 006 Pre-fail Always - 47002593
3 Spin_Up_Time 0x0003 095 088 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 093 093 020 Old_age Always - 7503
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1824
7 Seek_Error_Rate 0x000f 073 060 030 Pre-fail Always - 30233717690
9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 19872
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 20
12 Power_Cycle_Count 0x0032 097 037 020 Old_age Always - 3642
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1128
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 524296
189 High_Fly_Writes 0x003a 095 095 000 Old_age Always - 5
190 Airflow_Temperature_Cel 0x0022 056 041 045 Old_age Always In_the_past 44 (0 127 45 44 0)
194 Temperature_Celsius 0x0022 044 059 000 Old_age Always - 44 (0 10 0 0 0)
195 Hardware_ECC_Recovered 0x001a 029 021 000 Old_age Always - 47002593
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 223
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 223
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 58163 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 58163 occurred at disk power-on lifetime: 19872 hours (828 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT 4 sectors at LBA = 0x0032009d = 3276957
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 03 00 00 e0 00 00:19:50.807 READ DMA EXT
25 00 00 03 00 00 e0 00 00:19:49.807 READ DMA EXT
25 00 00 03 00 00 e0 00 00:19:48.807 READ DMA EXT
25 00 00 03 00 00 e0 00 00:19:47.807 READ DMA EXT
25 00 00 03 00 00 e0 00 00:19:46.794 READ DMA EXT
Error 58162 occurred at disk power-on lifetime: 19872 hours (828 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT 4 sectors at LBA = 0x0032009d = 3276957
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 03 00 00 e0 00 00:19:49.807 READ DMA EXT
25 00 00 03 00 00 e0 00 00:19:48.807 READ DMA EXT
25 00 00 03 00 00 e0 00 00:19:47.807 READ DMA EXT
25 00 00 03 00 00 e0 00 00:19:46.794 READ DMA EXT
35 00 01 02 00 00 e0 00 00:19:46.792 WRITE DMA EXT
Error 58161 occurred at disk power-on lifetime: 19872 hours (828 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT 4 sectors at LBA = 0x0032009d = 3276957
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 03 00 00 e0 00 00:19:48.807 READ DMA EXT
25 00 00 03 00 00 e0 00 00:19:47.807 READ DMA EXT
25 00 00 03 00 00 e0 00 00:19:46.794 READ DMA EXT
35 00 01 02 00 00 e0 00 00:19:46.792 WRITE DMA EXT
35 00 01 02 00 00 e0 00 00:19:45.792 WRITE DMA EXT
Error 58160 occurred at disk power-on lifetime: 19872 hours (828 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT 4 sectors at LBA = 0x0032009d = 3276957
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 03 00 00 e0 00 00:19:47.807 READ DMA EXT
25 00 00 03 00 00 e0 00 00:19:46.794 READ DMA EXT
35 00 01 02 00 00 e0 00 00:19:46.792 WRITE DMA EXT
35 00 01 02 00 00 e0 00 00:19:45.792 WRITE DMA EXT
35 00 01 02 00 00 e0 00 00:19:44.792 WRITE DMA EXT
Error 58159 occurred at disk power-on lifetime: 19872 hours (828 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT 4 sectors at LBA = 0x0032009d = 3276957
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 03 00 00 e0 00 00:19:46.794 READ DMA EXT
35 00 01 02 00 00 e0 00 00:19:46.792 WRITE DMA EXT
35 00 01 02 00 00 e0 00 00:19:45.792 WRITE DMA EXT
35 00 01 02 00 00 e0 00 00:19:44.792 WRITE DMA EXT
35 00 01 02 00 00 e0 00 00:19:43.792 WRITE DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 19871 310229
# 2 Conveyance offline Completed: read failure 90% 19871 310229
# 3 Short offline Completed: read failure 90% 19871 310229
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
Всего записей: 2 | Зарегистр. 24-04-2008 | Отправлено: 03:31 05-11-2014 | Исправлено: Megasnooper, 03:32 05-11-2014 |
|
