Перейти из форума на сайт.

НовостиФайловые архивы
ПоискАктивные темыТоп лист
ПравилаКто в on-line?
Вход Забыли пароль? Первый раз на этом сайте? Регистрация
Компьютерный форум Ru.Board » Hardware » Магнитные носители информации » WD3200BEVT errors in logical scan

Модерирует : Akam1, Dr_StandBy, vertex4

 Версия для печати • ПодписатьсяДобавить в закладки

Открыть новую тему     Написать ответ в эту тему

mesquivel

Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Hello, I am sorry i am not speak Russian and i need help.
 
I have been weeks working in  HDD
WD3200BEVT-22A23T0, FW: 01.01A01, Family:
Jamaica(Royal). The HDD identified OK, I read
Modules using WDMarvel 2.3 Beta and show error
on module 04:
 
13/09/2015  01:36:08: Ошибка чтения модуля ID04, статус - RSC_ALLOCATION_NO_CONTI_BUFFER
 
all other modules are OK, i can read G-List,
P-list, etc. If do Logic Scan show errors, test head show:
 
head 0-good
head 1-good
 
 I run SelfScan using the script of module 28
in HDD and finish OK, format using P-list OK
but after that the Logical Scan show errors again.
 
 I need help to found a solution for this HDD.
 
The LOG of SelfScan:
 
12/09/2015  06:53:53: SelfScan запущен
12/09/2015  06:54:31: Тест 1003/09 начат: 12/09/2015  06:54:31
12/09/2015  06:57:33: Выполнение заняло  12:03:02
12/09/2015  06:57:34: Тест 100B/00 начат: 12/09/2015  06:57:34
12/09/2015  06:57:40: Выполнение заняло  12:00:06
12/09/2015  06:57:40: Тест C4/01 начат: 12/09/2015  06:57:40
12/09/2015  08:06:50: Выполнение заняло  01:09:09
12/09/2015  08:06:50: Тест 00/00 начат: 12/09/2015  08:06:50
12/09/2015  08:07:39: Тест B1/00 начат: 12/09/2015  08:07:39
12/09/2015  08:11:53: Выполнение заняло  12:04:13
12/09/2015  08:11:53: Тест 1000/00 начат: 12/09/2015  08:11:53
12/09/2015  08:13:39: Выполнение заняло  12:01:45
12/09/2015  08:13:39: Тест D1/01 начат: 12/09/2015  08:13:39
12/09/2015  09:59:04: Выполнение заняло  01:45:25
12/09/2015  09:59:04: Тест DD/01 начат: 12/09/2015  09:59:04
12/09/2015  09:59:17: Выполнение заняло  12:00:13
12/09/2015  09:59:17: Тест DB/01 начат: 12/09/2015  09:59:17
13/09/2015  03:19:19: Выполнение заняло  05:20:02
13/09/2015  03:19:19: Тест 00/00 начат: 13/09/2015  03:19:19
13/09/2015  03:19:49: Тест D5/01 начат: 13/09/2015  03:19:49
13/09/2015  03:20:31: Выполнение заняло  12:00:42
13/09/2015  03:20:31: Тест D4/01 начат: 13/09/2015  03:20:31
13/09/2015  03:21:06: Выполнение заняло  12:00:34
13/09/2015  03:21:06: Тест D3/01 начат: 13/09/2015  03:21:06
13/09/2015  03:21:13: Выполнение заняло  12:00:06
13/09/2015  03:21:13: Тест D2/01 начат: 13/09/2015  03:21:13
13/09/2015  03:23:04: Выполнение заняло  12:01:50
13/09/2015  03:23:04: Тест 00/00 начат: 13/09/2015  03:23:04
13/09/2015  03:23:34: Тест 1002/01 начат: 13/09/2015  03:23:34
13/09/2015  03:24:10: Выполнение заняло  12:00:36
13/09/2015  03:24:10: Тест BB/01 начат: 13/09/2015  03:24:10
13/09/2015  03:24:11: Выполнение заняло  12:00:00
13/09/2015  03:24:11: Тест C4/01 начат: 13/09/2015  03:24:11
13/09/2015  03:24:38: Выполнение заняло  12:00:26
13/09/2015  03:24:38: Тест 3402/01 начат: 13/09/2015  03:24:38
13/09/2015  03:26:03: Выполнение заняло  12:01:25
13/09/2015  03:26:03: Тест 1003/07 начат: 13/09/2015  03:26:03
13/09/2015  03:27:57: Выполнение заняло  12:01:53
13/09/2015  03:27:57: Тест D7/01 начат: 13/09/2015  03:27:57
13/09/2015  03:30:08: Выполнение заняло  12:02:10
13/09/2015  03:30:08: Тест 1008/02 начат: 13/09/2015  03:30:08
13/09/2015  03:35:50: Выполнение заняло  12:05:41
13/09/2015  03:35:50: Тест 3302/01 начат: 13/09/2015  03:35:50
13/09/2015  03:35:51: Выполнение заняло  12:00:01
13/09/2015  03:35:51: Тест 2900/01 начат: 13/09/2015  03:35:51
13/09/2015  03:35:52: Выполнение заняло  12:00:00
13/09/2015  03:35:52: Тест DC/02 начат: 13/09/2015  03:35:52
13/09/2015  09:12:53: Выбрано устройство D400h D082h Master
 
After SlelfScan defect in p-list are:
 
Head 0 = 214
Head 1 = 1926
 
How can i head depop head 1 using WDMarvel 2.3 Beta?
 
The Logic Scan of HDD show errors and sometimes identified and read P
and G list  slowly.
   
 
Thank you very much in advanced for HELP.

Всего записей: 38 | Зарегистр. 23-04-2015 | Отправлено: 20:31 13-09-2015
tomset



BANNED
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
В таких ситуациях.
Либо ARCO нужно делать. Новой версией утилиты.
Либо он пилится и смысла ремонтировать его вообще нет.
 
Простите  за мой английский.
Прочитать могу, а написать понятно - нет.

Всего записей: 6906 | Зарегистр. 02-12-2002 | Отправлено: 20:40 13-09-2015 | Исправлено: tomset, 20:41 13-09-2015
igor_me

Gold Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
First, translate of tomset message.
In this situations you must start ARCO by new version of utility.
Or workspace of disks is degraded, and this disk is unrecoverable.
From me.

Цитата:
but after that the Logical Scan show errors again

Sometimes it could be happen.

Цитата:
How can i head depop head 1 using WDMarvel 2.3 Beta?  

You exact know, that bad head is 1?
It simple. You must change address of 1 region to 0 region, that disk started from zero copy of SA. And then give depop command. I'm not very quick type in english, and can't give step by step instruction. But I can do it for you trough remote desktop, if you can give me access. Or you can try translate instruction from topic of repair WD (http://forum.ru-board.com/topic.cgi?forum=84&topic=4089&start=2060#2). And next questions you can type in that topic.

Всего записей: 5716 | Зарегистр. 27-12-2011 | Отправлено: 02:05 14-09-2015
tametung

Silver Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору

Цитата:
You must change address of 1 region to 0 region, that disk started from zero copy of SA. And then give depop command.  

А зачем нужно сдвигать регионы ?

Всего записей: 2158 | Зарегистр. 27-01-2007 | Отправлено: 11:50 14-09-2015
igor_me

Gold Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору

Цитата:
А зачем нужно сдвигать регионы ?  

Затем, что разным софтом пользуемся Я наблюдал сбои при отключении системной головы, если адрес региона не переназначен на другую системную. И люди тут писали о таком. Возможно не на всех семействах, но я всегда делаю на всякий случай...

Всего записей: 5716 | Зарегистр. 27-12-2011 | Отправлено: 13:38 14-09-2015
mesquivel

Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору

 
tomset :
 
Thank for answer, How can i run ARCO?
 
igor_me
 
Thank for answer, I am sorry my internet connection not allow remote desktop. I am reading the
instructions right now.
 
 
Thank you for HELP.

Всего записей: 38 | Зарегистр. 23-04-2015 | Отправлено: 13:57 14-09-2015
tomset



BANNED
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
mesquivel
http://wdmarvel.com/en/buy/
 
WDMarvel new version (beta 7)  
•Removed Set Drive Format command from the preparations for the ARCO sequence for ROYL disc architecture
 
Wdmarvel new version (beta 6)  
•Added new offset ARCO Data in the buffer for new families
•Added entry of default (blank) ROM
•Mini ARCO now remembers offset ARCO Data buffer for each family on success
•Added option to enable the Target Search test to Full ARCO
•The sequence of ARCO tests now used modules generated with Mini ARCO
•In the manual start of ARCO added new tests
 
 

Всего записей: 6906 | Зарегистр. 02-12-2002 | Отправлено: 15:47 14-09-2015
mesquivel

Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору

 
 
tomset:
 
Thank for the answer but i can not buy using internet connection, I know WDMarvwl is
an excelent software but until now i can use only demo versions. I wish a full version but
i have not access to buy. Thank you very much for your help i know that without  a proper
tool is impossible fix the HDD.

Всего записей: 38 | Зарегистр. 23-04-2015 | Отправлено: 20:35 15-09-2015
igor_me

Gold Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
mesquivel
WDMarvel 2.3 beta can depop heads, selfsca in automode, and ARCO in hand-mode. It very very good functional You understand instruction about depop head?

Всего записей: 5716 | Зарегистр. 27-12-2011 | Отправлено: 00:51 16-09-2015 | Исправлено: igor_me, 00:55 16-09-2015
mesquivel

Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору

 
igor_me:
 
Thank you for answer.  
 
I understand instructions of head depop but i do not know how run ARCO  using  
WDMarvel 2.3 beta. Could you please explain to my how can i run ARCO
and what ARCO run in my case.
 
Thank you for HELP.
 
 
 

Всего записей: 38 | Зарегистр. 23-04-2015 | Отправлено: 05:22 16-09-2015
igor_me

Gold Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
And what result of Depop? Or you don't try this?
About ARCO. I don't heave step--by-step instruction. And it hard for me to type you , that i know. I only do some experiment. I don't have full working methood. You can try this youself. In WDMarvel you  se button "Запсук ARCO тестов" and some tests in list. You must know confirmation of tests and clean some modules before. For example
Подробнее...

Всего записей: 5716 | Зарегистр. 27-12-2011 | Отправлено: 15:14 16-09-2015
mesquivel

Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору

igor_me:
 
Thank you for answer.
 
I do not try head depop because the test head is good for head 0 and 1 and the
errors in logical scan do not follow any patron i can not see clearly what head is bad
I try Запсук ARCO тестов and run mini arco and full arco and finished quickly and
with error. I do not understaind why selfscan finish OK and  then the HDD show errors
in logical scan Could you please explaint to me the difference between ARCO test and
selfscan and why i can not run ARCO in my case.  
 
Than you very much for HELP.

Всего записей: 38 | Зарегистр. 23-04-2015 | Отправлено: 04:17 19-09-2015
igor_me

Gold Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору

Цитата:
i can not see clearly what head is bad  

To see bad head you can open G-list. If you see many remaps on one head only - you understand...

Цитата:
Could you please explaint to me the difference between ARCO test and  
selfscan  

ARCO - it a more "low-lewel" tests. Selfscan on WD it  a defect management in main function e etc. But ARCO can setting density, zone table etc. ARCO test must be running BEFORE selfscan.

Цитата:
why i can not run ARCO in my case

Maybe because you disk is "cracking", but more real variant, that program work not right. I say, that in this version start of ARCO test may work with errors, because this version is demo and not supporting more! This version for experimentators, but not for "end users"!
 
So, If depop head - is good variant for you, you must do it!

Всего записей: 5716 | Зарегистр. 27-12-2011 | Отправлено: 12:26 19-09-2015
mesquivel

Junior Member
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору

 
igor_me:
 
  Thank you for the answer.
 
  I try many test an after that can see that the
majority of error in the scan are beetween 15-20% of
the area of HDD, before and after that area the HDD scan  
with a very low number of errors. There is any way to cut
that zone use WDMarvel2.3 or WDR6 or move that zone to the
end and then adjust the HPA of HDD and leave that area away.
 
Thank you for HELP.

Всего записей: 38 | Зарегистр. 23-04-2015 | Отправлено: 14:37 24-09-2015
Открыть новую тему     Написать ответ в эту тему

Компьютерный форум Ru.Board » Hardware » Магнитные носители информации » WD3200BEVT errors in logical scan


Реклама на форуме Ru.Board.

Powered by Ikonboard "v2.1.7b" © 2000 Ikonboard.com
Modified by Ru.B0ard
© Ru.B0ard 2000-2024

BitCoin: 1NGG1chHtUvrtEqjeerQCKDMUi6S6CG4iC

Рейтинг.ru