lavabot
Advanced Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
[root@localhost stan]# smartctl -a /dev/sde
smartctl 7.2 2021-01-17 r5170 [x86_64-linux-5.10.9-201.fc33.x86_64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.9
Device Model: ST3160811AS
Serial Number: 5PT1DKVX
Firmware Version: 3.AAE
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Tue Jan 26 23:05:14 2021 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 25) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 075 006 Pre-fail Always - 188940061
3 Spin_Up_Time 0x0003 097 095 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 090 090 020 Old_age Always - 11152
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 2
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 61797378
9 Power_On_Hours 0x0032 075 075 000 Old_age Always - 22138
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 089 089 020 Old_age Always - 11976
187 Reported_Uncorrect 0x0032 079 079 000 Old_age Always - 21
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 066 035 045 Old_age Always In_the_past 34 (4 249 34 29 0)
194 Temperature_Celsius 0x0022 034 065 000 Old_age Always - 34 (0 16 0 0 0)
195 Hardware_ECC_Recovered 0x001a 086 046 000 Old_age Always - 216057506
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 13
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 21 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 21 occurred at disk power-on lifetime: 21670 hours (902 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 93 5f 8a e0 Error: UNC at LBA = 0x008a5f93 = 9068435
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 20 5f 8a e0 00 00:20:40.002 READ DMA EXT
25 00 08 18 5f 8a e0 00 00:20:40.026 READ DMA EXT
25 00 08 10 5f 8a e0 00 00:20:40.026 READ DMA EXT
25 00 08 08 5f 8a e0 00 00:20:40.026 READ DMA EXT
25 00 08 f0 5e 8a e0 00 00:20:40.026 READ DMA EXT
Error 20 occurred at disk power-on lifetime: 21670 hours (902 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 93 5f 8a e0 Error: UNC at LBA = 0x008a5f93 = 9068435
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 20 5f 8a e0 00 00:20:35.124 READ DMA EXT
25 00 00 20 5e 8a e0 00 00:20:35.187 READ DMA EXT
25 00 10 70 82 8a e0 00 00:20:35.181 READ DMA EXT
25 00 08 b0 67 8a e0 00 00:20:35.158 READ DMA EXT
25 00 08 c8 67 8a e0 00 00:20:35.151 READ DMA EXT
Error 19 occurred at disk power-on lifetime: 21664 hours (902 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 93 5f 8a e0 Error: UNC at LBA = 0x008a5f93 = 9068435
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 30 5f 8a e0 00 00:15:11.036 READ DMA EXT
25 00 80 b0 5e 8a e0 00 00:15:10.800 READ DMA EXT
25 00 80 30 5e 8a e0 00 00:15:06.116 READ DMA EXT
25 00 80 b0 5d 8a e0 00 00:15:06.115 READ DMA EXT
25 00 80 30 5d 8a e0 00 00:15:06.109 READ DMA EXT
Error 18 occurred at disk power-on lifetime: 21664 hours (902 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 93 5f 8a e0 Error: UNC at LBA = 0x008a5f93 = 9068435
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 90 5f 8a e0 00 00:15:11.036 READ DMA EXT
25 00 08 90 5f 8a e0 00 00:15:10.800 READ DMA EXT
25 00 08 90 5f 8a e0 00 00:15:06.116 READ DMA EXT
25 00 08 80 5f 8a e0 00 00:15:06.115 READ DMA EXT
25 00 18 80 5f 8a e0 00 00:15:06.109 READ DMA EXT
Error 17 occurred at disk power-on lifetime: 21664 hours (902 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 93 5f 8a e0 Error: UNC at LBA = 0x008a5f93 = 9068435
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 90 5f 8a e0 00 00:15:11.036 READ DMA EXT
25 00 08 90 5f 8a e0 00 00:15:10.800 READ DMA EXT
25 00 08 80 5f 8a e0 00 00:15:06.116 READ DMA EXT
25 00 18 80 5f 8a e0 00 00:15:06.115 READ DMA EXT
25 00 40 08 61 8a e0 00 00:15:06.109 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 90% 22010 -
# 2 Short offline Completed without error 00% 14846 -
# 3 Short offline Completed without error 00% 14845 -
# 4 Short offline Completed without error 00% 14728 -
# 5 Short offline Completed without error 00% 12084 -
# 6 Short offline Completed without error 00% 12080 -
# 7 Short offline Completed without error 00% 12079 -
# 8 Short offline Completed without error 00% 4304 -
# 9 Short offline Aborted by host 90% 22010 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[root@localhost stan]#
|
