Leninxxx
Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
<?xml version = "1.0"?>
<Genesis_Log>
<Log_Body>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Overall Summary:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Start Time: Sat, 06/12/2021 @ 15:04:16
End Time: Sat, 06/12/2021 @ 15:05:41
OverallResult: FAIL
ExitCode: (0x10090007:SF_GENESIS_FLASH_TEST_ONLY_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Environment Settings:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Input Parameters:
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /media/123/fw/FW_PPRO_6_1_8_Release.1115287.release--0/FW_PPRO_6_1_8_Release.1115287.release.0.mfp
argv[4]: /media/123/fw/FW_PPRO_6_1_8_Release.1115287.release--0/Configuration_Files/25034.0.driveconfig
argv[5]: 12345
argv[6]: WWW_123
argv[7]: LOG=/media/123/log
Log File: /media/123/log
Hostname: localhost.localdomain
Host IP Address: 127.0.0.1
Port Number: 0
DeviceName: /dev/sg0
SF_Genesis Version: v1.7.0.01020130612-fc14-32bit
SF_Core Library Version: v1.7.1.20130612-fc14-32bit
SF_OS_Information: Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post Processing Device Information:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WWN OUI: UNKNOWN
WWN UniqueID: UNKNOWN
Serial No.: UNKNOWN
Model No.: UNKNOWN
Firmware Revision: UNKNOWN
ROM Revision: UNKNOWN
NAND Page Size: UNKNOWN
Number Of Chip Enable: UNKNOWN
Logical Sectors: UNKNOWN
NAND ID: UNKNOWN
Flash Manufacturer: UNKNOWN
Flash Device: UNKNOWN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sat 06/12/2021 15:04:16] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /media/123/fw/FW_PPRO_6_1_8_Release.1115287.release--0/FW_PPRO_6_1_8_Release.1115287.release.0.mfp
argv[4]: /media/123/fw/FW_PPRO_6_1_8_Release.1115287.release--0/Configuration_Files/25034.0.driveconfig
argv[5]: 12345
argv[6]: WWW_123
argv[7]: LOG=/media/123/log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sat 06/12/2021 15:04:16] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0'
[Sat 06/12/2021 15:04:21] - Issuing a discovery command for device: '0:0:0:0'
[Sat 06/12/2021 15:04:26] - Discovery command completed...
[Sat 06/12/2021 15:04:26] - Waiting 5 seconds for the system to settle...
[Sat 06/12/2021 15:04:31] - Device designation string '0:0:0:0' is mapped to node '/dev/sg0'
[Sat 06/12/2021 15:04:31] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg0
MFP Package Filename = /media/123/fw/FW_PPRO_6_1_8_Release.1115287.release--0/FW_PPRO_6_1_8_Release.1115287.release.0.mfp
Configuration File = /media/123/fw/FW_PPRO_6_1_8_Release.1115287.release--0/Configuration_Files/25034.0.driveconfig
Serial No. = 12345
World Wide Name = WWW_123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sat 06/12/2021 15:04:31] - Successfully received the IDENTIFY data from the drive...
[Sat 06/12/2021 15:04:31] - Validating Manufacturing Firmware Package: /media/123/fw/FW_PPRO_6_1_8_Release.1115287.release--0/FW_PPRO_6_1_8_Release.1115287.release.0.mfp
[Sat 06/12/2021 15:04:32] - Successfully opened the package: /media/123/fw/FW_PPRO_6_1_8_Release.1115287.release--0/FW_PPRO_6_1_8_Release.1115287.release.0.mfp
[Sat 06/12/2021 15:04:32] - file /media/123/fw/FW_PPRO_6_1_8_Release.1115287.release--0/Configuration_Files/25034.0.driveconfig Loaded successfully
[Sat 06/12/2021 15:04:32] - Warning: Unable to query diagnostics information to perform power management settings check
[Sat 06/12/2021 15:04:32] - B01 Power Management configuration request detected
[Sat 06/12/2021 15:04:32] - Successfully extracted *.DriveConfig file: /media/123/fw/FW_PPRO_6_1_8_Release.1115287.release--0/Configuration_Files/25034.0.driveconfig
[Sat 06/12/2021 15:04:32] - Extracted Config_ID: 1 (25034) in DriveConfig file: /media/123/fw/FW_PPRO_6_1_8_Release.1115287.release--0/Configuration_Files/25034.0.driveconfig
[Sat 06/12/2021 15:04:32] - Extracted SerialOutputControl: 0
[Sat 06/12/2021 15:04:32] - Searching for flashware image for configuration 25034
[Sat 06/12/2021 15:04:32] - Manifest found for configuration 25034
[Sat 06/12/2021 15:04:32] - Flashware image extracted: 25034_fw_cl_emlc_Toshiba_32Gb_TH58TAG8E2FBA89_4Q_4C_2D_PP_R00039_s512.vic
[Sat 06/12/2021 15:04:32] - Searching for manufacturing image for configuration 25034
[Sat 06/12/2021 15:04:32] - Manifest found for configuration 25034
[Sat 06/12/2021 15:04:32] - Manufacturing image extracted: 25034_mf_emlc_Toshiba_32Gb_TH58TAG8E2FBA89_4Q_4C_2D_PP_R00039_s512.vic
[Sat 06/12/2021 15:04:32] - Proceeding in ROM mode, download feature 3...
[Sat 06/12/2021 15:04:32] - Successfully downloaded MFB to the drive...
[Sat 06/12/2021 15:04:32] - Waiting (5 sec) for the drive to settle...
[Sat 06/12/2021 15:04:37] - Successfully received the IDENTIFY data from the drive...
[Sat 06/12/2021 15:04:37] - Firmware revision reported to be: '618ABBM0'. This indicates MFB download was successful.
[Sat 06/12/2021 15:04:37] - Successfully enabled SMART capabilities...
[Sat 06/12/2021 15:04:40] - Successfully issued a diagnostic unlock...
[Sat 06/12/2021 15:04:41] - Performing the flash test of block 0 (0x0000)...
[Sat 06/12/2021 15:05:41] - FATAL_ERROR: Could not perform DoFlashTest() on the drive... (0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ATA COMMAND : 0x00B0 (176)
ATA FEATURE : 0x00D5 (213)
Device Status: 0x0001 (1)
Driver Status: 0x0000 (0)
Host Status: 0x0008 (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0 - No Sense: 114 (0x72) OK
1 - Recovered Error: 11 (0x0B) FAIL
2 - Not Ready: 0 (0x00) OK
3 - Medium Error: 0 (0x00) OK
4 - Hardware Error: 0 (0x00) OK
5 - Illegal Request: 0 (0x00) OK
6 - Unit Attention: 0 (0x00) OK
7 - Data Protect: 14 (0x0E) OK
8 - Blank Check: 9 (0x09) OK
9 - Vendor Specific: 12 (0x0C) OK
10 - Copy Aborted: 0 (0x00) OK
11 - Aborted Command: 0 (0x00) OK
12 - Equal Comparison: 0 (0x00) NA
13 - Volume Overflow: 0 (0x00) NA
14 - Miscompare: 0 (0x00) OK
15 - Reserved: 1 (0x01) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~
[ 7150.474759] sd 0:0:0:0: [sda] START_STOP FAILED
[ 7150.474761] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7150.474765] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[ 7150.474771] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[ 7150.475003] ata1.00: disabled
[ 7155.479620] ata1: hard resetting link
[ 7155.783782] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7155.784816] ata1.00: ATA-8: SandForce{200026BB}, 20DABBR0, max UDMA/133
[ 7155.784823] ata1.00: 64 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 7155.790546] ata1.00: configured for UDMA/133
[ 7155.790564] ata1: EH complete
[ 7155.791000] scsi 0:0:0:0: Direct-Access ATA SandForce{200026 20DA PQ: 0 ANSI: 5
[ 7155.791401] sd 0:0:0:0: [sda] 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
[ 7155.791408] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 7155.791483] sd 0:0:0:0: [sda] Write Protect is off
[ 7155.791489] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7155.791498] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7155.791532] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 7155.791930] sda: unknown partition table
[ 7155.803544] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7181.766556] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7181.766568] ata1.00: failed command: SMART
[ 7181.766581] ata1.00: cmd b0/d5:04:e1:4f:c2/00:00:00:00:00/00 tag 0 pio 2048 in
[ 7181.766583] res 40/00:00:01:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 7181.766589] ata1.00: status: { DRDY }
[ 7181.766602] ata1: hard resetting link
[ 7187.117914] ata1: link is slow to respond, please be patient (ready=0)
[ 7189.411833] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7194.409461] ata1.00: qc timeout (cmd 0xec)
[ 7194.409475] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 7194.409481] ata1.00: revalidation failed (errno=-5)
[ 7194.409490] ata1: hard resetting link
[ 7194.714312] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7204.709654] ata1.00: qc timeout (cmd 0xec)
[ 7204.709668] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 7204.709673] ata1.00: revalidation failed (errno=-5)
[ 7204.709681] ata1: limiting SATA link speed to 1.5 Gbps
[ 7204.709688] ata1: hard resetting link
[ 7205.014392] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 7235.000296] ata1.00: qc timeout (cmd 0xec)
[ 7235.000309] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 7235.000316] ata1.00: revalidation failed (errno=-5)
[ 7235.000322] ata1.00: disabled
[ 7235.000347] ata1: hard resetting link
[ 7235.305067] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 7235.305107] ata1: EH complete
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sat 06/12/2021 15:05:41] - End of Genesis manufacturing log.
[Sat 06/12/2021 15:05:41] - Exiting...
</Log_Body>
<Overall_Summary>
<Start_Time> Sat, 06/12/2021 @ 15:04:16 </Start_Time>
<End_Time> Sat, 06/12/2021 @ 15:05:41 </End_Time>
<Overall_Result> FAIL </Overall_Result>
<Exit_Code> (0x10090007:SF_GENESIS_FLASH_TEST_ONLY_ERROR) </Exit_Code>
</Overall_Summary>
<Environment_Settings>
<Input_Parameters>
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /media/123/fw/FW_PPRO_6_1_8_Release.1115287.release--0/FW_PPRO_6_1_8_Release.1115287.release.0.mfp
argv[4]: /media/123/fw/FW_PPRO_6_1_8_Release.1115287.release--0/Configuration_Files/25034.0.driveconfig
argv[5]: 12345
argv[6]: WWW_123
argv[7]: LOG=/media/123/log
</Input_Parameters>
<Log_File> /media/123/log </Log_File>
<Hostname> localhost.localdomain </Hostname>
<Host_IP_Address> 127.0.0.1 </Host_IP_Address>
<Port_Number> 0 </Port_Number>
<Device_Name> /dev/sg0 </Device_Name>
<SF_Genesis_Version> v1.7.0.01020130612-fc14-32bit </SF_Genesis_Version>
<SF_Core_Library_Version> v1.7.1.20130612-fc14-32bit </SF_Core_Library_Version>
<SF_OS_Information> Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686 </SF_OS_Information>
</Environment_Settings>
<Post_Processing_Device_Info>
<WWN_OUI> UNKNOWN </WWN_OUI>
<WWN_UniqueID> UNKNOWN </WWN_UniqueID>
<Serial_Number> UNKNOWN </Serial_Number>
<Model_Number> UNKNOWN </Model_Number>
<Firmware_Revision> UNKNOWN </Firmware_Revision>
<ROM_Revision> UNKNOWN </ROM_Revision>
<NAND_Page_Size> UNKNOWN </NAND_Page_Size>
<Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable>
<Logical_Sectors> UNKNOWN </Logical_Sectors>
<NAND_ID> UNKNOWN </NAND_ID>
<Flash_Manufacturer> UNKNOWN </Flash_Manufacturer>
<Flash_Device> UNKNOWN </Flash_Device>
</Post_Processing_Device_Info>
</Genesis_Log>
[Sat 06/12/2021 15:05:41] - Overall Result for Device: /dev/sg0 ****** FAIL ******
|
Всего записей: 339 | Зарегистр. 31-03-2004 | Отправлено: 03:40 27-06-2021 | Исправлено: Leninxxx, 04:34 27-06-2021 |
|
